Panasonic NR-TV341B Refrigerator Instruction Manual

Operating Instructions
Refrigerator
For Household Use

Model No.: NR-TV341B

NON-CFC
This unit uses totally NON-CFC MATERIALS both for refrigerant (R600a) and for insulation (Cyclo-Pentane). So, this refrigerator does not damage the Earth’s ozone layer.

Thank you for purchasing the Panasonic product.

  • Please read these instructions carefully and follow safety precautions on pages 2-5 before using this product.
  • Please make sure the date and name of the store of purchase are stamped on the warranty card and keep it with these operating instructions.

HK

ARAH1E202770
P0921-0
Printed in Vietnam

Safety precautions

Please be sure to follow these instructions.

WARNING
This sign means: It may lead to a serious injury or death.

 These signs mean prohibited action.
This sign means required action.
This sign means the appliance must be earthed to prevent electric shock.

CAUTION
This sign means: It may result in injury or property damage.

iso-butane
Risk of fire/flammable materials

WARNING
Otherwise, it may cause a fire, injury, electrical shock.

When using…

● Do not damage the cooling circuit (piping on the back).
● Do not touch the compressor and pipes, because of high temperature, and there is a risk of burn injury.
● Do not let any children hang onto the refrigerator’s door, it may overturn the kid.
● Do not place any water container on the top of the refrigerator in case the spilling water causes electrical shock or combustion.
● Do not locate multiple portable socket outlets or portable supplies at the rear of the appliance.
● Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
● This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
● Children should be supervised to ensure that they do not play with the appliance.

When recycling the product…

● Before taking the refrigerator to be recycled, please remove all the door opening seals to prevent locking a child in it.
● The warning labels mentioned above should be kept throughout the life of the refrigerator.
● The operating instructions should be handed over to any person who would use or handle the refrigerator whenever the refrigerator would be transferred to another location and delivered to a recycling plant.
● Regarding local laws, Cyclo-Pentane is used for the insulation of this refrigerator. When you throw away this unit, please discard it by proper method and do not dispose of it by burning.

WARNING
Otherwise, it may cause a fire, injury, electrical shock.

For power plug and cord…

● Do not plug or unplug with wet hands.
● Do not let the cord or plug be damaged.
● Disconnect power plug when cleaning.
● Plug into a wall outlet of the rated voltage on its own with the rated current and insert the plug fully.
● Reserve one socket for the refrigerator only. Avoid connecting many appliances to the same socket and unroll through the length of the cord.
● Remove dust periodically from the power plug.
● If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
● If you detect a burning smell, disconnect the power plug and ventilate the kitchen.
● Stop using the refrigerator and unplug the unit immediately if there is an abnormality or failure. Abnormality and failure examples:
– Power cord or plug is abnormally hot.
– Power cord is deeply cut or deformed.
– There is a burning smell.
– You can feel tingling electricity.

In case of emergency…

iso-butane

● Maintenance work only is carried out at workshops by well-trained maintenance workers.
● Do not store explosive substances such as aerosol cans with a flammable propellant and chemicals or scientific specimens in the appliance.
● Do not use electrical appliances such as a deodorizer in the refrigerator. Leaked refrigerant may catch fire from a spark of the electrical contacts and may cause an explosion.
● Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
● Do not disassemble, repair or modify the refrigerator by yourself. If you want to repair the refrigerator, please consult your dealer or authorized service center.
● Do not use a mechanical device or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

When installing…

● Fix the refrigerator to avoid danger due to unbalance.
● When positioning the appliance, ensure the supply cord is not trapped or damaged.
● Ensure that the refrigerator is plugged into an earthed mains socket.

CAUTION
Otherwise, it may cause injury, accidents.

When opening/closing the doors…

● While opening the refrigerator, be careful not to pinch the other one’s hand holding the door.
● Mind the gap between the doors. They may nip your hand while closing the door.

When storing food…

● Do not freeze glass bottles, so there is a risk of injury.
(If the liquid in a glass bottle is frozen, then the bottle may break and you may be injured.)
● Do not add a high impact on glass trays. (Otherwise, those glass trays may break and you may be injured.)

When moving the refrigerator…

● Hold the refrigerator tightly when transporting.
● Apply protective covering, etc. to floors with a fragile surface.

Usage precautions

When opening/closing the doors…

  • Do not refrigerate items that are bigger than the tray or shelf, as the door will not close completely causing leakage of cool air.
  • Do not open the refrigerator frequently or leave it open for a long time in order to prevent water dripping inside and wasting energy.
  • Frequently check the door opening seal, it must be closed to the refrigerator’s body completely.

When cleaning…

  • Do not clean the refrigerator with chemical substances or liquid.
    It will cause damage and have corrosion on the surface.
  • Clean the pan water evap located over the compressor at the back of the refrigerator every three months to prevent the odor generated from humidity.

When using…

  • When the plug is disconnected, leave it for 5 minutes before plugging again. If not, the compressor may not work.
  • Adjust the temperature according to the actual operating condition for energy saving.
  • The humidity inside the fresh case may condense so wipe it with a cloth periodically. Clean the fresh case once a month.
  • If you will not be at home for several days and there is nothing refrigerated in the refrigerator, the plug should be disconnected for energy saving.
  • The outside wall of the refrigerator cabinet may sometimes get warm, especially just after installation. This is quite normal and is due to the built-in Mullion Dryer Pipe which prevents sweating and radiates heat.
  • When humidity is high, e.g. during the rainy season, condensation may appear on the surface of the cabinet, especially around the door seal gasket. Wipe off the condensed water with a clean cloth.
  • Do not keep the door open any longer than necessary, particularly in hot, humid weather.

When storing food…

  • Do not place warm/hot foodstuff in the refrigerator.
  • Do not overload the refrigerator. A gap must be provided between foodstuffs to maintain the cooling effect.
  • Store fruits and vegetables in vegetable cases, where trapped moisture helps preserve food quality for longer time periods.
  • Drinking water, beverage bottles should be sealed to prevent odor contamination.
  • Foodstuff such as vegetables, fruits, and fresh food should be wrapped or packed inbox before freezing and refrigerating.
  • Put the food such as meat or fish in the freezer if you want to store it for an extended period.
  • Cover juicy food with tight lids, plastic film, or foil.
  • Cool hot dishes at room temperature before placing them in your refrigerator.

SPECIAL FEATURE
1) ECONAVI
The microchip performing ECONAVI mode is integrated into the main control board. By detecting the refrigerator’s frequency of use (opening and closing of door), ECONAVI mode automatically operates to save energy.

2) INVERTER
In accordance with the temperature change inside the compartment, the motor of the compressor runs at different speeds. When the temperature is stable, the motor runs at a lower speed (energy saving & lower noise). When powerful cooling is required, the motor runs at a higher speed.

Installation

The distance requested for installation

  • The top of the refrigerator and the ceiling are at least 5 cm.
  • The back of the refrigerator and the wall is at least 5 cm.
  • The sides of the refrigerator and the walls are at least 5 cm.

The area around the installed unit

  • Do not locate the refrigerator in a humid place as rust may form and may cause electric leakage.
  • Do not locate the refrigerator exposed to direct sunlight as the heat and sunlight will increase the temperature.
  • Do not locate the refrigerator near heat sources such as a cooking stove or oven.
  • Do not block the openings around the refrigerator.
  • The refrigerator must be located in a place where there is good air circulation.
  • In case of placing the refrigerator on an uneven surface, adjust the adjustable bolt to make the refrigerator stands stably.

Moving or shifting

  • When moving or shifting the refrigerator, remove the ice cube tray, box ice tray, pan water evap, etc., and check to be sure that there is no water in the refrigerator.

Power cord setting

  • To bring a power cord for use, pan water evap from the left should be lifted up. Then bring the power cord out and then insert pan water evap into the block by pressing at both sides.

LED lamp and grounding

  • The refrigerator LED lamp, specially designed for this refrigerator, does not function on individual replacing. If you need replacement, please contact Panasonic Service Center.
  • If there is no grounding wiring plug in the refrigerator, it should be connected with a grounding connection to prevent electrical hazards from electric leakage.

Parts identification

Temperature control

Operate the REFRIGERATOR TEMP. CONTROL when changing the temperature of REFRIGERATOR COMPARTMENT.

TEMP. CONTROL REFRIGERATOR COMPARTMENT
“1” Higher than “2” by approximately 2 °C ~ 3 °C
“2” Approximately 3 °C ~ 5 °C
“3” Lower than “2” by approximately 2 °C ~ 3 °C

Operate the COLD AIR CONTROL when changing the cold air condition.

COLD AIR CONTROL
“FRIDGE MAX” REFRIGERATOR COMPARTMENT takes priority
“NORMAL” Cold air condition is normal
“FRIDGE MAX” FREEZER COMPARTMENT takes priority

Note: The temperature of the Refrigerator depends on the environment, room temperature, and food storage quantity.

Usage tips

Freezing “If storing food for an extended period…”
For storage of frozen or dried foods.
Ag Hygiene Zone “Fresh food…”
For storage of fresh foods such as meat or fish to avoid the odors spread out the freezer compartment.
Refrigeration “Food and drinks readily served…”
For regular storage of food and drinks or temporary storage of those to be served soon.
Extra Cool Zone “Dairy products…”
For dairy products, etc. that perish easily but whose quality changes if frozen.
Vegetable case “Fruits and vegetables”
Rather high humidity keeps fruits and vegetables fresh and juicy.

How to make ice cubes with an icemaker

STEP

  1. Fill water in the ice cube tray till the water level line.
  2. Put ice cube tray inside Freezer room, wait until the ice is made.
  3. To remove ice cubes, suppress the frame with the left hand and twist the dial ice cube tray clockwise with the right hand.
    The ice cubes will drop into the box ice tray.

Remark:

  • Don’t pour water into icebox for ice-making, otherwise, the box may crack.

How to clean the refrigerator

  1. Interior cleaning
    Wipe off the stain with warm water. When stains can not be removed easily, wipe them with warm water and soap by using a soft cloth.
    Then wipe the soap off using a damp soft cloth.
  2. Exterior cleaning
    Cleaning by using a soft cloth with warm water and soap.
    Then wipe off the soap with a warm soft cloth.
  3. Gasket door FC/PC
    • Clean by wiping gently. In this area, petroleum gel was applied to reduce the friction to the refrigerator body.
    Be careful not to wipe off them.
    • The door opening seal is replaceable when reaching the end of life. While cleaning, push it back to the groove if it comes off.

Note: Do not use the following items. (Otherwise, the surface will be scratched.)

Removing glass tray PC / FC, glass tray crisper for cleaning

  • Removing
    1. Lift the tray upward then pull it forward until removing.
    2. For the tray cool zone, tilt the tray slightly upward for easier removal.
  • Attaching
    3. Place tray on both supporters, then push until it reaches the end.
    Remark:
  • When removing the tray above the vegetable case, pull out the vegetable case first and then follow to remove the tray as above details.
  • In case of attaching the tray and it does not lock, make sure that you did not attach the wrong tray.
  • Make sure that you don’t attach the upper side of the tray downward.

Removing vegetable case, Ag Hygiene case for cleaning

  • Removing1. Pull the case until it reaches the end of the stopper.
    2. Raise up the front of the case a bit and then completely take it out.
  • Attaching
    1. Keep the lid on the vegetable case lifting until the case is attached.
    2. Raise it up and place the case on both supporters.
    3. Push the case until it reaches the end.

Removing shelf egg, shelf bottle, shelf FC for cleaning

  • Removing
    1. Lift it upward, alternating between the right and left sides.
  • Attaching
    2. Place it on both supporters, and then press until it reaches the end of supporters.

Removing pan water evap for cleaning

  • Removing
    1. Tilt up the pan water evap a bit and then lift it upward until the pan water evap hole unlocks from the pan water evap hook.
    2. Pull the pan water evap until it touches the evap pipe then carefully take it out under the evap pipe.
  • Attaching
    1. Insert the pan water evap under the evap pipe.
    2. Insert the pan water evap hole into the hook pan water evap as well as press-fitting both sides.
    Remark: Check the status to make sure evap pipe does not touch the pan water evap.

Troubleshooting

Before you call for service, please check the following items:

The refrigerator does not operate. ● Check that the plug and its socket are in good condition.
● Check if there is any problem with the main fuse and electrical system of the house.
● Check by unplugging and waiting for 5 minutes before plugging it back in.
The refrigerator does not cool enough. ● Check to be sure that the temperature control dial is in the proper position.
● Check to see if the refrigerator is overloaded with stuff or there is any hot foodstuff refrigerated inside.
● Is the refrigerator exposed directly to sunlight or heat sources?
● Is the refrigerator door completely closed?
● Is the refrigerator door opened frequently?
Dew, snow appears. Outside ● When the ambient humidity is too high, the door gasket may have dew. This situation will be stopped if the air humidity decreases. Please wipe it up with a dry cloth.
Inside ● Is the door closed firmly?
● Is the door being opened and closed too frequently?
● When too high weather humidity, long opening time, or making too much ice, inside the freezer compartment may appear frozen snow. This is normal. Please wipe with a dry and soft cloth.
The refrigerator makes noise. ● Check if the refrigerator is located on a stable floor or is installed properly.
● Check if there is any object in contact with the refrigerator.
Food becomes frozen. ● Check if the refrigerator is located on a stable floor or is installed properly.
● Check if there is any object in contact with the refrigerator.
The inside is smelling. ● Do you store food with a dry odor without wrapping it?
The surfaces of the refrigerator are hot. ● Because the refrigerator is equipped with dew prevention and heat radiation tubes, the surfaces of the refrigerator get warmer when operating.
● The back and side plates may get warmer especially when starting up or if the door is frequently opened and closed.
The normal sounds of the refrigerator. ● When the refrigerator starts operation, the sound like water flowing and boiling water is created. This is the sound of the cooling liquid.
●The noise is generated when the automatic defrost system is operated.
●The dilatation of the details inside the refrigerator in the cooling process can cause sound “crack-crack”.
●You may feel that the operation sound is larger because the compressor operates at high-speed under the following conditions: the refrigerator does not cool fully on the occasion such as using it for the first time, opening/closing the door too frequently, the surrounding temperature is high. The sound becomes quieter after cooling fully.
The lamp does not turn on. ●Please contact the Panasonic service center.

Specifications

Model No. NR-TV341B
Freezer Star Rating
 

Capacity (L) (IEC 62552:2007)

Total 306
Freezer 82
Refrigerator 224
Outside Dimensions
Width x Depth x Height (mm)
601.5 x 657 x 1645
Net Weight (kg) 52
Refrigerant Type R600a
Rated Voltage (V) Rated Frequency (Hz) Refer to the rating label attached inside the cabinet.

Panasonic Corporation
Website: https://www.panasonic.com

© Panasonic Appliances Vietnam Co., Ltd. 2021