Candy CBG6251XP Canopy Cooker Hood User Manual

CANDY CBG6251XP Canopy Cooker Hood User Manual

INTRODUCTION

Thank you for choosing this cooker hood.
This instruction manual is designed to provide you with all requiredInstructions related to the installation, use and maintenance of theappliance.
In order to operate the unit correctly and safety, please read this instructionmanual carefully before installation and usage.
The cooker hood use high quality materials, and is made with astreamlined design. Equipped with large power electric motor andcentrifugal fan, it also provides strong suction power, low noise operation,non-stick grease filter and easy assembly installation.

SAFETY PRECAUTION

  • Never let the children operate the machine.
  • The cooker hood is for home use only, not suitable for barbecue, roast shop and other commercial purpose.
  • The cooker hood and its filter should be clean regularly inorder to keep in good working condition.
  • Clean the cooker hood according to the instruction manual andkeep the unit from danger of burning. There is a fire risk if cleaning is not carried out in accordance with the instructions.
  • Forbid the direct baking from the gas cooker.
  • Please keep the kitchen room a good convection.
  • If the supply cord is damaged, it must be replaced by themanufacturer, its service agent similarly qualified persons inorder to avoid a hazard.
  • There shall be adequate ventilation of the room when therange hoods used at the same time as appliances burning gasor other fuels;
  • The air must not be discharged into a flue that is used forexhausting fumes from appliances burning gas or other fuels;
  • Regulations concerning the discharge of air have to be fulfilled.
  • This appliance can be used by children aged from 8 years andabove and persons with reduced physical, sensory or mentalcapabilities or lack of experience and knowledge if they havebeen given supervision or instruction concerning use of theappliance in a safe way and understand the hazards involved.
  • Children should be supervised to ensure that they do not playwith the appliance.
  • Cleaning and user maintenance shall not be made by childrenwithout supervision.
  • Do not flame under the range hood.
  • CAUTION: Accessible parts may become hot whenused with cooking appliance.
  • The warning shall be in the same part of the instructions thatinclude details of how to mount the equipment.

Electrical Shock Hazard

  • Only plug this unit into a properly earthed outlet. If indoubt seek advice from a suitably qualified engineer.
  • Failure to follow these instructions can result indeath, fire, or electrical shock.

The lamp used in this product is not suitable for use in the lighting of a room.
The purpose of this lamp is to provide illumination for using the product.

Electrical Installation

All installation must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate.

Direct Connection
The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3mm between the contacts.
The installer must ensure that the correct electrical connection has been made and that it complies with the wiring diagram.
The cable must not be bent or compressed.
Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

WARNING: This is a Class I appliance and MUST be earthed This appliance is supplied with a 3 core mains cable coloured as follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or Earth

The fuse must be rated at 3 Amps.

Prepare for installation

  • If you have an outlet to the outside, your cooker hood can be connected as below picture by means of an extraction duct (enamel, aluminum, flexible pipe or inflammable material with an interior diameter of 150mm)
  • Before installation, turn the unit off and unplug it from the outlet.
  • The cooker hood should be placed at a distance of 65~75cm above the cooking plane for best effect.

Specifications

  • CBG620/1X
  • CBG620/1W
  • CBG620/1N
  • CBG625/1X
  • CBG625/1W
  • CBG625/1N
  • CBG52SX
  • CBG640/2X
  • CBG6250/1X

Installation

  • The typical installation method for your range hood is into a purpose built overhead/wall cabinet.
  • Using a jigsaw, create the required cut-out for your range hood, as 490 × 250mm
  • Make sure the cut-out is at least 35mm from the cabinet edge.
  • Remove the grease filter and remove the 2 screws on the panel.
  • Screw the range hood into the cabinet using 8 screws (supplied).
  • Re-fit the panel with the 2 screws (previously removed).
    CBG620/1X
    CBG620/1W
    CBG620/1N
    CBG625/1X
    CBG625/1W
    CBG625/1N
    CBG52SX
    CBG640/2X
    CBG6250/1X

Activated carbon filter can be used to trap odors.
In order to install the activated carbon filter, the grease filter should be detached first. Press the lock and pull it downward.

Plug the activated carbon filter into the unit and turn it in clockwise direction. Repeat the same on the other side.

DESCRIPTION OF COMPONENTS

OPERATION

  • Off button
    It’s used for turning off the fan.
  • Low Speed button     
    It’s used for Ventilation on the kitchen. It is suitable for simmering and cooking which do not make much steam.
  • Medium Speed button
    Airflow speed is ideally for ventilation in standard cooking operation.
  • High Speed button
    When high density of smoke or steam produced, press high-speed button for
    highest effective ventilation.
    NOTE: If Low / Medium / High speed buttons are press at the same time, the unit will only operate at the highest speed.
  • Light button

MAINTENANCE

Before cleaning switch the unit off and pull out the plug.

  1. Regular Cleaning
    Use a soft cloth moistened with hand-warm mildly soapy water or household cleaning detergent. Never use metal pads, chemical, abrasive material or stiff brush to clean the unit.
  2. Monthly Cleaning for Grease Filter
    ESSENTIAL: Clean the filter every month can prevent any risk of fire
    The filter collects grease, smoke and dust……so the filter is directly affecting the efficiency of the cooker hood. If not cleaned, the grease residue (potential flammable) will saturate on the filter. Clean it with household cleaning detergent
  3. Annual Cleaning for Activated Carbon Filter
    Apply SOLELY to unit that installed asa recirculation unit (not vented to the outside). This filter traps odours and must be replaced at least once a year depending on how frequent the cooker hood used.
  4. Bulb Replacement
    1. Switch the unit off and unplug the appliance.
    2. Remove the lamp cover by unscrewing the 2 screws.
    3. Unscrew the LED lamp
    4. Replace with the same type and lamp
      • LED lamp (220V max,2W).

TROUBLESHOOTING

Fault

Cause

Solution

Light on, but fan does not work The fan blade is jammed. Switch of the unit and repair by qualified service personnel only.
The motor is damaged
Both light and fan do not work light bulb burn. Replace the bulb with correct rating.
Power cord looses. Plug in to the power supply again.
Serious Vibration of the unit The fan blade is damaged. Switch of the unit and repair by qualified service personnel only
The fan motor is not fixed tightly. Switch of the unit and repair by qualified service personnel only.
The unit is not hung properly on the bracket. Take down the unit and check whether the bracket is in proper location.
Suction performance not good Too long distance between the unit and the cooking plane Readjust the distance to 65-75cm

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.