Canon LBP722CDW I-Sensys Printer User Guide

Canon LBP722CDW I-Sensys Printer

After finish reading this guide, store it in a safe place for future reference.
The information in this guide is subject to change without notice.

Important Safety Instructions 
Be sure to read these manuals before using the machine.

Setup Guide (this document)

https://oip.manual.canon/

Checking the Items Included

Install the machine in the location where it  will be used.

Removing the Packing Material

Install the machine in the location where it  will be used. Remove all the packing material.

Loading Paper

Installing the Optional Product

If you are not using optional product, proceed to step 5

Before Installing the Optional Product

When installing the optional product after the machine has been installed, perform the following before starting work:

  1.  Shut down the machine and your computer.
  2.  Unplug the machine from the mains power outlet.
  3. Disconnect all cords and cables from the machine..

Paper Feeder/Cassette Pedestal

Install the paper feeder in the location where it will be used.

 When Using the Cassette Pedestal

Install the cassette pedestal in the location where it will be used.

Connecting the Power Cord

 

Specifying the Basic Settings

When you turn on the machine for the first time, the Setup Guide starts up on the operation panel. Perform the initial machine setup by following the on-screen instructions.

  1. Select the language.
  2. Select the country/region.
  3. Select the time zone.
  4. Set the current date/time.

Specifying the Security Settings

Set an Administrator password to increase machine security.

  1. Check the message and press ok
  2.  Select <Yes>.
    To continue without setting a password, select <No> and proceed to “Specifying the Network Settings”.
  3. Enter a password and select <Apply>. Enter the same password again and select <Apply>.
  4. Check the message and press ok

Specifying the Network Settings

Specify the settings for connecting the machine to a network. Before proceeding, check that the computer and router are correctly connected to the network.
Wired LAN

  1. Select <Wired LAN>.
  2. Connect the LAN cable.

Wait a few minutes while the machine’s IP address is automatically set.

Wireless LAN

The example described in this document is for the <SSID Settings>. See the User’s Guide for information on other configuration procedures.

  1.  Check the router’s “SSID” and “Network  key”.
  2. Select <Wireless LAN>.
  3. Check the message and press
  4. Select <SSID Settings>.
  5. Select <Select Access Point>.
  6. Select the router with the matching SSID. If the <Apply settings of IEEE 802.1X Settings to the connection?> message appears, select <Yes> and proceed to step 8 below.
  7.  Enter the network key you checked above and select <Apply>.
  8.  Select <Yes>.
    Once a connection is established, the home screen appears.

Installing the Software/Drivers

Install the software and drivers from the CD/DVD-ROM included, or visit the URL below and download them from the Canon website for your country/region.
https://global.canon/en/support/

  • CANON INC.
    30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
  • CANON MARKETING JAPAN INC.
    16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan
  • CANON U.S.A., INC.
    One Canon Park, Melville, NY 11747, U.S.A.
  • CANON EUROPA N.V.
    Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
  • CANON SINGAPORE PTE LTD
    1 Fusionopolis Place, #15-10, Galaxis, Singapore 138522
  • CANON AUSTRALIA PTY LTD
    Building A, The Park Estate, 5 Talavera Road, Macquarie Park, NSW 2113, Australia
  • CANON GLOBAL WORLDWIDE SITES
    https://global.canon/