Amana AER6303MFS Electric Range User Guide

Electric Range Control Guide

Cooktop Use

Fire Hazard
Turn off all controls when done cooking.
Failure to do so could result in death or fire.

Coil Elements and Burner Bowls
Coil elements should be level for optimal cooking results. Burner bowls, when clean, reflect heat back to the cookware. They also help catch spills.
Cookware should not extend more than 1/2″ (1.3 cm) over the coil element. If the cookware is uneven or too large, it can produce excess heat, causing the burner bowl to change color.

  • Weight of the Cookware to be no Lighter than 1 lb.
  • Discoloration of Medallion of the Coil Element is expected over time.
  • Starting in June 2018 Whirlpool is equipping this product with new temperature-limiting coils pursuant to the updated standards in UL858. These new coils may vary cooking times compared to your old cooktop, e.g., a slightly longer time to boil large volumes of water.

Cooktop On Indicator Light

The Cooktop On indicator light is located on the console panel.
When any control knob on the console panel is turned on, the Cooktop On indicator light will glow.

Cookware
IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element, or surface burner
Ideal cookware should have a flat bottom, straight sides, and a well-fitting lid, and the material should be of medium-to-heavy thickness.
Rough finishes may scratch the cooktop. Aluminum and copper may be used as a core or base in cookware. However, when used as a base they can leave permanent marks on the surfaces.
Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of aluminum.
Cookware with nonstick surfaces should not be used under the broiler.
Check for flatness by placing the straight edge of a ruler across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.

Use the following chart as a guide for cookware material characteristics.

COOKWARE

CHARACTERISTICS

Aluminum
  • Heats quickly and evenly
  • Suitable for all types of cooking.
  • Medium or heavy thickness is best for most cooking tasks.
  • May leave aluminum residues, which may be diminished if cleaned immediately after cooking.
Cast iron
  • Heats slowly and evenly
  • Good for browning and frying.
  • Maintains heat for slow cooking.
  • Rough edges or burrs may scratch the cooktop.
Ceramic or Ceramic glass
  • Follow manufacturer’s instructions.
  • Heats slowly, but unevenly.
  • Ideal results on low to medium heat settings.
  • May scratch the cooktop.
Copper
  • Heats very quickly and evenly.
  • May leave copper residues, which may be diminished if cleaned immediately after cooking.
  • Can leave a permanent stain or bond to the cooktop if overheated.
Earthenware
  • Follow manufacturer’s instructions.
  • Use on low heat settings.
  • May scratch the cooktop.
Porcelain enamel-on-steel or cast iron
  •  See stainless steel or cast iron.
  • Porcelain enamel bakeware without the metal base may bond to the cooktop if overheated.
Stainless steel
  • Heats quickly, but unevenly
  •  A core or base of aluminum or copper on stainless steel provides even heating.

Use flat-bottomed cookware for best cooking results and energy efficiency. The cookware should be about the same size as the cooking area outlined on the cooktop. Cookware should not extend more than 1/2″ (1.3 cm) outside the area.

Home Canning
Canning can be performed on a glass-smooth top cooking surface or traditional coil element cooktop. When canning for long periods,  alternate the use of surface cooking areas or elements between batches. This allows time for the most recently used areas to cool.

  • Center the canner on the largest surface cooking area or element. On electric cooktops, canners should not extend more than 1/2″ (1.3 cm) beyond the surface cooking area or element.
  • Do not place canner on 2 surface cooking areas or elements at the same time.
  •  On ceramic glass models, use only flat-bottomed canners to avoid damage to the cooktop and elements.
  • For more information, contact your local agricultural extension office, or refer to published home canning guides. Companies that manufacture home canning products can also offer assistance.

Oven use
Odors and smoke are normal when the oven is used the first few times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to fumes may result in the death of certain birds. Always move birds to another closed and well-ventilated room.
Oven Light Switch (on some models)
The oven light switch is located on the top left corner of the range.
Oven Heating Indicator Light
The Oven Heating indicator light, located on the console panel, will glow when either the Bake or Broil function is turned on.

Positioning Racks and Bakeware

Bakeware

To cook food evenly, hot air must be able to circulate. Allow 2″ (5 cm) of space around bakeware and oven walls. Make sure that no bakeware piece is directly over another.

Rack Positions
Rack 5: Toasting bread or broiling thin, non-fatty foods.
Rack 4: 2-rack baking and broiling.
Rack 3: Most baked goods on a cookie sheet or jelly roll pan, layer cakes, frozen convenience foods; broiling chicken pieces.
Rack 2: Roasting small cuts of meat, pies, casseroles, bundt cakes, and 2-rack baking.
Rack 1: Roasting large cuts of meat and poultry.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 4.

Baking and Roasting

Before baking and roasting, position the racks according to the “Positioning Racks and Bakeware” section. When roasting, it is not necessary to wait for the oven to preheat before putting food in, unless recommended in the recipe.
Oven Temperature
While in use, the oven elements will cycle on and off as needed to maintain a consistent temperature, but they may run slightly hot or cool at any point in time due to this cycling. Opening the oven door while in use will release the hot air and cool the oven which could impact the cooking time and performance. It is recommended to use the oven light to monitor cooking progress.
To Bake or Roast:

  1. Push in and turn the oven control knob to the desired temperature setting. The Oven Heating light will turn on and remain on until the oven reaches the set temperature.
  2. Place food in the oven. The bake element will turn on and off to maintain the cooking temperature. The Oven Heating light will turn on and off with the element.
  3. Turn the oven control knob to OFF when finished.

Broiling

Leave the door open at the broil stop position to ensure proper broiling temperature. Preheat the oven for 5 minutes before putting food in unless recommended otherwise in the recipe. Position food on the grid in a broiler pan, and then place it in the center of the oven rack.

NOTE: Odors and smoke are normal the first few times the oven is used or if the oven is heavily soiled.

Changing the temperature when broiling allows more precise control when cooking. The lower the broil setting, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish, and poultry may cook better at lower broil settings. Use racks 4 or 5 for broiling. Refer to the “Positioning Racks and Bakeware” section for more information.
In lower settings, the broil element will cycle on and off to maintain the proper temperature.

  • For best results, use a broiler pan and grid. It is designed to drain juices and help avoid spatter and smoke.
    If you would like to purchase a broiler pan, one may be ordered. Please refer to the Quick Start Guide for contact information.

®/™ ©2020 Amana. All rights reserved. Used under license in Canada.

W11481069A