AEG B3007PS 30 Inch Built-In Multi-function Oven with Steam Assist Cooking Installation Guide

AEG B3007PS 30 Inch Built-In Multi-function Oven with Steam Assist Cooking

OVEN PROGRAMS

  • Defrost
  • Conventional cooking
  • Convection
  • Steam assist cooking
  • Fan assist
  • Half grill
  • Full grill
  • Fan grill
  • High bake
  • Pizza mode
  • Low bake
  • Convection half grill

OVEN FEATURES

  • 30″ (76cm) wide stainless steel oven
  • MaxiKlasse™120L (4.3 cu.ft) capacity
  • Full colour LCD touch control
  • Side halogen light
  • 11 cooking functions including True Fan convectionwith SteamAssist
  • Heavy-duty chrome racks
  • Power ventilated glazed door panels
  • Removable door and glass panes for easy cleaning
  • Degree C/F temperature display, with 12 hrclock
  • Auto cook function
  • Child lock
  • Sabbath mode
  • Pyrolytic cleaning
  • Removable glass for easy cleaning

OVEN ACCESSORIES

  • Grill/roasting pan
  • Reversible grill insert
  • 2 chrome oven racks : 22” W x 151/4”
  • Full-extension telescopic rails (1 pair)
  • Optional bottom vent grill(7427640) available

Specifications

OVEN BODY DIMENSIONS

  • D: 2213/16” x H: 271/16” x W: 283/8”
  • D: 580mm x H: 687mm x W: 720mm

CUT-OUT DIMENSIONS

  • D: 231/4” x H: 271/4” x W: 287/16”
  • D: 590mm x H: 692mm x W: 722mm

CONDO ELECTRICAL REQUIREMENTS

  • 208 Volt, 60 hZ, 3460 Watt, 20 AMP

HOUSE ELECTRICAL REQUIREMENTS

  • 240 Volt, 60 hZ, 4580 Watt, 30 AMP

IMPORTANT

  • AEG ovens are supplied with a5’ long electrical cable and must be hard-wired to the electrical supply
  • AEG ovens uses the following wires:RED & BLACK: Live WiresGREEN: GroundThe Neutral (White) wire is not required for the electrical installation.

VOID CUT-OUT

  • If the oven is mounted in a tall or semi-tall cabinet, there must be a minimum gap of 119/16” (4cm) cut out of the shelf and behind the upper cabinet to allow air to flow freely
  • A void must be cut-out in the shelf of the cabinet. Leave 4” of shelf material around the void.
  • Additional support must be added to the shelf with the void. The support must be able to withstand the oven weight.
  • If sufficient air flow is not provided, the life of the appliance will be shortened.
  • Cut-out in the toe kick is required
  • Optional bottom vent grill(7427640) available.

AIRFLOW REQUIREMENTS

  • If the oven is being placed under the counter, there must be a minimum gap of 19/16” (4cm) cut out of the shelf behind the oven to allow air to flow freely.
  • If sufficient airflow is not provided, the life of the appliance will be shortened.
  • Cut-out in the toe kick is required.•Bottom vent grill (7427640) available.

FOR PARTS AND SERVICE
Euro-Parts&Service
39822BelgraveRoad,Belgrave, ON. N0G1E0
18006788352(Canada)•18005614614(U.S.)
www.euro-parts.ca