Yamaha PA-130B Power Supply AC Adaptor Owner’s Manual
YAMAHA PA-130B Power Supply AC Adaptor
Owner’s Manual
- Connect the DC plug to the DC IN jack on the device.
- Connect the other end (AC plug) into an AC outlet.
WARNING
- This AC adaptor is designed for use with only Yamaha devices. Do not use for any other purpose.
- Indoor use only. Do not use in any wet environments.
- Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire.
CAUTION
When setting up, make sure that the AC outlet is easily accessible. If some trouble or malfunction occurs, immediately disconnect the AC adaptor from the outlet. When the AC adaptor is connected to the AC outlet, keep in mind that electricity is flowing at the minimum level, even if the adaptor is not connected to the device. When you are not using the device for a long time, make sure to unplug the power cord from the wall AC outlet.
If the plug is accidentally removed from the AC adaptor Without touching the metallic section, slide the plug into place as shown in the illustration z then push it in completely until you hear the click sound.
WARNING
- Make sure to keep the plug attached to the AC adaptor. Using the plug alone can cause electric shock or fire.
- Never touch the metallic section when attaching the plug. To avoid electric shock, short circuit or damage, also be careful that there is no dust between the AC adaptor and plug.
For Singapore
Users are only allowed to use EN50075 detachable and interchangeable 2-pin plugs or BS1363-3 or SS145-3 detachable and interchangeable 3-pin plugs that are approved and suitable for use in Singapore.
Slide the plug as indicated, then push it in completely until you hear the click sound.
NOTE: The shape of the plug differs depending on the locale.
