Sony VPL-VW790ES 4K Laser Video Projector User Manual

SONY VPL-VW790ES 4K Laser Video Projector User Manual

About the Quick Reference Manual

This Quick Reference Manual explains the installation and basic operations for projecting pictures.
Before operating the unit, please read this manual thoroughly and retain it for future reference.
Refer to “About Indicators” as necessary.
For details on the operations, refer to the Operating Instructions contained in the supplied CD-ROM.

Using the CD-ROM manual

The manual can be read on a computer with Adobe Reader installed.
You can download Adobe Reader free from the Adobe website.

  1. Open the index.html file in the CD-ROM.
  2. Select and click on the manual that you want to read.

Note

If you have lost or damaged the CD-ROM, you can purchase a new one from your Sony dealer or Sony service counter.

Adobe and Adobe Reader are trademarks of Adobe System Incorporated in the United States and/or other countries.

When using the product, do not use it for purposes other than those described in the instruction manual.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

WARNING
 This apparatus must be earthed.

WARNING
When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug.

CAUTION
About the LAN connector
For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this port.

CAUTION

  • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
  • When you dispose of the battery or the product, you must obey the law in the corresponding area or country. Do not dispose of the battery or the product in a fire or a hot oven, or mechanically crush or cut the battery. It may explode or cause a fire. Do not subject the battery to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  • Do not place the battery in a high temperature place, such as under direct sunlight or near fire. It may ignite, explode, or cause a fire. Do not immerse or wet the battery in water or seawater. This may cause an electric shock.

CAUTION
The following size and number of batteries are required for the remote control.

  •  Size: AA (R6)
  • Number of battery(ies): Two pieces
    To avoid risk of explosion, use only the following type of battery.
  • Alkaline or manganese batteries

For the customers in the U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed t provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of part 15 of FCC Rules.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

If you have any questions about this product, you may call; Sony Customer Information Service Center 1-800-222- 7669 or http://www.sony.com/

Supplier’s Declaration of Conformity

  • Trade Name: SONY
  • Model: VPL-VW790ES
  • Responsible party: Sony Electronics Inc.
  • Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
  • Telephone Number: 858-942-2230

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

For the customers the U.S.A. Radiated Exposure Statement:
The product complies with the US portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or if the device is set to lower output power if such function is available.

For the customers the U.S.A. and Canada Radiated Exposure Statement:
The product complies with the US/Canadian portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or if the device is set to lower output power if such function is available.

CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
This product is classified as a CLASS 3R LASER PRODUCT.

WARNING
LASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT

CAUTION
Do not look into the lens while in use.

CAUTION
Do not allow children to operate this product without supervision.

CAUTION
The use of optical instruments with this product will increase eye hazard.

For the customers in other countries/regions

EC 60825-1:2014
CLASS 1 LASER PRODUCT

As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.
WARNING: Do not look into the lens while in use.

Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Caution
The use of optical instruments with this product will increase eye hazard.

Location information of the labels

Light source specifications

3.75 W laser diodes × 24
Wavelength: 450 – 460 nm

Beam divergence angle from lens of this unit
Zoom maximum: α = 42.5°
Zoom minimum: α = 21.3°

Do not place any object just in front of the lens that may block the light during projection. Heat from the light may damage the object. Use the picture muting function to cut off the picture.

About 3D Glasses
The 3D Glasses communicate with the projector via
Bluetooth technology to display 3D signals.

  • (a) frequency band(s) in which the radio equipment operates: 2.4 – 2.4835 GHz
  • (b) maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates: 4.30 dBm (E.I.R.P.)

Hereby, Sony Corporation declares that this equipment is in compliance with the UK relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: https://compliance.sony.co.uk

Hereby, Sony Corporation declares that this equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.compliance.sony.eu/

Precautions

On safety

  • Check that the operating voltage of your unit is identical with the voltage of your local power supply.
  • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further.
  • Unplug the unit from the wall outlet if it is not to be used for several days.
  • To disconnect the cord, pull it out by the plug. Never pull the cord itself.
  • The wall outlet should be near the unit and easily accessible.
  • The unit is not disconnected to the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
  • Do not look into the lens while in use.
  • Do not place your hand or objects near the ventilation holes. The air coming out is hot.

On preventing internal heat build-up

After you turn off the power with the (On/Standby) button, do not disconnect the unit from the wall outlet while the cooling fan is still running.

Caution
This unit is equipped with ventilation holes (intake/ exhaust). Do not block or place anything near these holes, or internal heat build-up may occur, causing picture degradation or damage to the unit.

On repacking
Save the original shipping carton and packing material; they will come in handy if you ever have to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory.

On watching 3D video images

Safety precautions

  • You should only use the 3D glasses for watching 3D video images.
  • If you observe flickering or flashing, turn off the lighting in the room.
  • Not for use by children without proper adult supervision.
  • Be careful not to pinch your fingers in hinges of the 3D glasses when bending the temple frames.
  • Do not drop or modify these 3D glasses.
  • If these glasses are broken, keep broken pieces away from your mouth or eyes.

On inspection of light source related parts

Since the unit uses a laser, when performing maintenance or inspection of light source related parts, particular attention and a safe environment are necessary. Be sure to consult with qualified Sony personnel (charged).

On LCD Projector
The LCD projector is manufactured using high-precision technology. You may, however, see tiny black points and/ or bright points (red, blue, or green) that continuously appear on the LCD projector. This is a normal result of the manufacturing process and does not indicate a malfunction.
Also, when you use multiple LCD projectors to project onto a screen, even if they are of the same model, the color reproduction among projectors may vary, since color balance may be set differently from one projector to the next.

On condensation
If the room temperature where the projector is installed changes rapidly, or if the projector is moved suddenly from a cold to a warm place, condensation in the projector may occur. As the condensation may cause malfunction, be careful in adjusting temperature settings of the air conditioner. If condensation occurs, leave the projector turned on for about two hours before use.

Notes on security

  • SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION DEVICES, UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND.
  • Depending on the operating environment, unauthorized third parties on the network may be able to access the unit. When connecting the unit to the network, be sure to confirm that the network is protected securely.
  • From a safety standpoint, when using the unit connected with the network, it is strongly recommended to access the Control window via a Web browser and change the access limitation settings from the factory preset values (refer to “Network Features” in the Operating Instructions). Changing the password regularly is also recommended.
  • Do not browse any other website in the Web browser while making settings or after making settings. Since the login status remains in the Web browser, close the Web browser when you complete the settings to prevent unauthorized third parties from using the unit or harmful programs from running.

Do not place this product close to medical devices
This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.

SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM THE USE OF THIS UNIT FOR PURPOSES OTHER THAN GENERAL HOME USE, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY.

Notes on Installation and Usage

Unsuitable installation 

Do not place the unit in the following situations, which may cause malfunction or damage to the unit.

Near walls
To maintain the performance and reliability of the unit, leave space between walls and the unit as illustrated.

Note that the wall on the ventilation holes side may become hot.
Air from air conditioners or the ventilation holes of this unit or other devices, may cause oscillation on the screen. Be sure not to install this unit in the area where the air from air conditioners or the ventilation holes of these devices reach to the front side of this unit.

Poorly ventilated location
Leave space of more than 30 cm (11 7/8 inches) around the unit.

Hot and humid

Locations subject to direct cool or warm air from an air-conditioner
Installing the unit in such a location may cause a malfunction of the unit due to moisture condensation or rise in temperature.

Near a heat or smoke sensor
Malfunction of the sensor may occur.

Very dusty and extremely smoky locations

Unsuitable Conditions

Do not do any of the following while using the unit.

Tilting front/rear and left/right
Avoid using the unit tilted at an angle, as shown in the following illustrations.
Do not install the unit anywhere other than on a level surface or on the ceiling. Installing the unit in such a location may result in uneven color uniformity. If the unit is tilted up or down, the image on the screen may be trapezoidal. Position the unit so that the lens is parallel to the screen.

When installing the unit at high altitudes
When using the unit at an altitude of 1,500 m (approx. 4,900 ft) or higher, set “High Altitude Mode” on the Setup menu to “On”. Failing to set this mode when using the unit at high altitudes could have adverse effects, such as reducing the reliability of certain components.

Safety precautions for installing the unit on a ceiling
  • Never mount the projector on the ceiling or move it by yourself. Be sure to consult with qualified Sony personnel (charged).
  • When installing the unit on a ceiling, be sure to use a safety wire, etc., to prevent the unit from falling. Entrust the installation to an experienced contractor or installer.

For dealers

  • When the projector is mounted on the ceiling, a Sony bracket or recommended equivalent must be used for installation.
  • Be sure to secure the cabinet cover firmly when installing to the ceiling firmly.

Step: Preparing

Checking the Supplied Accessories

Check the carton to make sure it contains the following items:

  • Remote control RM-PJ24 (1)
  • Size AA (R6) batteries (2)
  • Lens cap (1)
    When you purchase the projector, a lens cap is on the lens. Remove the lens cap before you use the projector.
  • AC power cord (1)
  • Quick Reference Manual (this manual) (1)
  • Operating Instructions (CD-ROM) (1)
Inserting the Batteries into the Remote Control

Caution about handling the remote control

  • Handle the remote control with care. Do not drop or step on it, or spill liquid of any kind onto it.
  • Do not place the remote control in a location near a heat source, a place subject to direct sunlight, or a damp room.

Step 2: Installing the Unit

  1. Position the unit so that the lens is parallel to the screen.
  2. After connecting the AC power cord to the unit, plug the AC power cord into a wall outlet.
    Rear of the unit

     Front of the unit
    Lights in red
    Note
    After connecting the AC power cord to the unit, the ON/ STANDBY indicator may blink in orange.
    You may not be able to control the unit while the indicator is blinking, but this is not a malfunction. Wait until it stops blinking and remains lit in red.
  3. Press the (On/Standby) button to turn on the unit.

    Front of the uni

    Flashes in green for tens of seconds and then lights in green.
  4. Project an image on the screen, then adjust the focus, size, and position.
    1. Adjust the focus.
      Press the LENS ADJUSTMENT (FOCUS) button to display the Lens Focus adjustment window (test pattern). Then adjust the focus of the picture by pressing the , button.
    2. Adjust the picture size.
      Press the LENS ADJUSTMENT (ZOOM) button to display the Lens Zoom adjustment window (test pattern). Then adjust the size of the picture by pressing the , button.
    3. Adjust the picture position.
      Press the LENS ADJUSTMENT (SHIFT) button to display the Lens Shift adjustment window (test pattern). Then adjust to the proper position of the picture by pressing the , button.

To adjust the tilt of the installation surface
If the unit is installed on an uneven surface, use the front feet (adjustable) to keep the unit level.

Notes

  • If the unit is tilted up or down, the projected image may be trapezoidal.
  • Be careful not to catch your finger when turning the front feet (adjustable).

Lens adjustment window (test pattern)

The dashed lines show the screen sizes of each aspect ratio.

Step 3: Connecting the Unit

When making connections, be sure to do the following:

  • Turn off all equipment before making any connections.
  • Use the proper cables for each connection.
  • Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable itself.
  • Refer to the operating instructions of the connected equipment.

    When you monitor and control the projector via the network, access the Setup page of the projector (refer to “Using Network Features” in
    the Operating Instructions) via a Web browser and enable the desired control protocol.

Step 4: Projecting

Projecting the Picture
  1. Turn on both the unit and the equipment connected to the unit.
  2. Press INPUT to display the input palette on the screen.
  3. Select the equipment from which you want to display images.
    Press INPUT repeatedly or press (enter) to select the equipment from which to project.
Turning Off the Power
  1. Press the (On/Standby) button
    The message “POWER OFF?” appears.
  2. Press the (On/Standby) button again before the message disappears.
    The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the internal heat.
    The fan stops and the ON/STANDBY indicator changes from flashing green to remaining red.

The power is turned off completely, and you can disconnect the AC power cord.

Note
Never disconnect the AC power cord while the indicator is flashing.

Tip
You can turn off the unit by holding the (On/Standby) button for about 1 second, instead of performing the above steps.

Selecting the Picture Viewing Mode

Press one of the CALIBRATED PRESET buttons.

Setting items

Description

CINEMA FILM 1 Picture quality suited to reproducing the highly dynamic and clear images typical of master positive film.
CINEMA FILM 2 Picture quality suited to reproducing the rich tone and color typical of a movie theater, based on the “CINEMA FILM 1.”
REF A picture quality setup suitable for when you want to reproduce faithfully the original image quality, or for enjoying image quality, without any adjustment.
TV Picture quality suited for watching TV programs, sports, concerts, and other video images.
PHOTO Ideal for projecting still images taken with a digital camera.
GAME Picture quality suited to gaming, with well- modulated colors and fast response.
BRT CINE Picture quality suited for watching movies in a bright environment, such as a living room.
BRT TV Picture quality suited for watching TV programs, sports, concerts, and other video images in a bright environment, such as a living room.
USER Adjusts the picture quality to suit your taste then saves the setting. The factory default setting is the same as “REF.”

Error Handling

About Indicators

The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with your projector.
If there is any problem or an error message appears on the screen, refer to “Error Handling” in the Operating Instructions contained in the supplied CD-ROM.

Flashing/Lighting indicators The number of flashes Cause and Remedy
Three times The unit does not light properly due to an abnormality of the light source and light source power. Turn off, then turn on the power after a while. If the symptom persists, consult qualified Sony personnel.
Six times The unit detects a drop impact. If there is abnormality on the unit, consult with qualified Sony personnel. If there are no abnormalities on the unit, disconnect the AC power cord and check that the ON/STANDBY indicator turns off, then connect the AC power cord and turn the unit on.

Both indicators flash

 Twice The internal temperature is unusually high. Check to ensure that nothing is blocking the ventilation holes and the unit is not being used at high altitudes
Three times The fan is broken. Consult with qualified Sony personnel.

Note
If the symptom persists even after carrying out the above methods, consult with qualified Sony personnel.
If the indicator starts flashing in a way of other than the above, turn off, and then turn on the power with the (On/Standby) button on the remote control or control panel of the unit.
If the symptom is shown again, consult with qualified Sony personnel.

Warranty

For the customers in the U.S.A

SONY LIMITED WARRANTY
Please visit http://www.sony.com/psa/warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

For the customers in Canada

SONY LIMITED WARRANTY
Please visit http://www.sonybiz.ca/pro/lang/en/ca/article/resourceswarranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

For the customers in Europe

Sony Professional Solutions Europe – Standard Warranty and Exceptions on Standard Warranty. Please visit https://pro.sony/en_GB/support-services/warranty/support-professional-solutions-europestandard-product-warranty for important information and complete terms and conditions.

For the customers in Korea

SONY LIMITED WARRANTY
Please visit http://bpeng.sony.co.kr/handler/BPAS-Start for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

If there is any problem or an error message appears on the screen, refer to “Error Handling” in the Operating Instructions contained in the supplied CD-ROM.