Philips 326M6 Momentum 32 Inch UHD TV User Manual

326M6 Momentum 32 Inch UHD TV

Momentum
326M6

www.philips.com/welcome

EN User manual

Customer care and warranty 22

Troubleshooting & FAQs 26

Table of Contents
1. Important ………………………………… 1 1.1 Safety precautions and maintenance ……………………………. 1 1.2 Notational Descriptions …………. 3 1.3 Disposal of product and packing material……………………………………. 4
2. Setting up the monitor…………… 5 2.1 Installation ………………………………. 5 2.2 Operating the monitor……………..7 2.3 MultiView ………………………………… 9 2.4 Remove the Base Assembly for VESA Mounting……………………….. 11
3. Image Optimization ………………. 12 3.1 SmartImage ……………………………. 12 3.2 SmartContrast ………………………… 13
4. Ambiglow ………………………………. 14
5. Adaptive Sync ……………………….. 15
6. HDR ……………………………………….. 16
7. Technical Specifications ……….. 17 7.1 Resolution & Preset Modes ….20
8. Power Management ……………… 21
9. Customer care and warranty .. 22 9.1 Philips’ Flat Panel Monitors Pixel Defect Policy………………… 22 9.2 Customer Care & Warranty …… 25
10. Troubleshooting & FAQs………. 26 10.1 Troubleshooting…………………….26 10.2General FAQs………………………… 27

1. Important
1. Important
This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user’s manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.
1.1 Safety precautions and maintenance
Warnings Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor.
Operation · Please Keep the monitor out of
direct sunlight, very strong bright lights and away from any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor. · Keep the display away from oil. Oil may damage the plastic cover of the display and void the warranty. · Remove any object that could fall into ventilation holes or prevent

proper cooling of the monitor’s electronics.
· Do not block the ventilation holes on the cabinet.
· When positioning the monitor, make sure the power plug and outlet are easily accessible.
· If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.
· Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Service contact information listed in Regulation & Service Information Manual.)
· Operate under the specified power supply. Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.
· Do not disassemble the AC adapter. Disassembling the AC adapter may expose you to the danger of fire or electric shock.
· Protect the cable. Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables, if damaged, the cables may cause fire or electric shock.
· Do not subject the monitor to severe vibration or high impact conditions during operation.
· To avoid potential damage, for example the panel peeling from the bezel, ensure that the monitor does not tilt downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the

1. Important
monitor damage will not be covered under warranty.
· Do not knock or drop the monitor during operation or transportation.
· Excessive usage of monitor can cause eye discomfort, it’s better to take shorter breaks more often at your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two hours. Try to keep your eyes from eye strain while using the screen for a constant period of time by : · Looking at something varying distances after a long period focusing on the screen. · Conscious Blinking often while you work. · Gently closing and rolling your eyes to relax. · Reposition your screen to appropriate height and angle according to your height. · Adjusting the brightness and contrast to appropriate level. · Adjusting the environment lighting similar to that of your screen brightness, avoid the fluorescent lighting, and surfaces that don’t reflect too much light. · Seeing a doctor if your symptoms.
Maintenance
· To protect your monitor from possible damage, do not put excessive pressure on the monitor panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the monitor panel.

· Oil-based cleaning solutions may damage the plastic parts and void the warranty.
· Unplug the monitor if you are not going to use it for an extensive period of time.
· Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.
· To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.
· If your monitor gets wet, wipe it with dry cloth as soon as possible.
· If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center.
· Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.
· In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.
· Temperature: 0-40°C 32-104°F · Humidity: 20-80% RH
Important information for Burn-in/ Ghost image
· Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.

1. Important
Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. · “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “Burn-in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “afterimage” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.
Service
· The casing cover should be opened only by qualified service personnel.
· If there is any need for any document for repair or integration, please contact with your local service center. (Please refer to Service contact information listed in Regulation & Service Information Manual.)
· For transportation information, please refer to “Technical Specifications”.
· Do not leave your monitor in a car/ trunk under direct sun light.
Note Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed.

1.2 Notational Descriptions
The following subsections describe notational conventions used in this document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows:
Note This icon indicates important information and tips that help you make better use of your computer system.
Caution This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
Warning This icon indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority.

1. Important
1.3 Disposal of product and packing material
Waste Electrical and Electronic Equipment-WEEE
This marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your local government office, the waste disposal organization that serves your household or the store at which you purchased the product.
Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of.
All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials.
Please find out about the local regulations on how to dispose of your old monitor and packing from your sales representative.

Taking back/Recycling Information for Customers
Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization’s product, service and activities.
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national takeback initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company.
Your display is manufactured with high quality materials and components which can be recycled and reused.
To learn more about our recycling program please visit:
http://www.philips.com/a-w/about/ sustainability.html

2. Setting up the monitor
2. Setting up the monitor

2.1 Installation
Package contents

Momentum 326M6

Quick
Start
Register your product and get support at www.philips.com/welcome

printed in China. Version

2019 © TOP Victory Investments Ltd

Monitor User’s Manual

Contents: User’s Manual Drivers

www.philips.com/welcome

This product has been manufactured by and is

sold under the responsibility of Top Victory

All

rights

reserved.

Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Unauthorized duplication is a violation of applicable

laws.

Made

and

* CD

Install base stand 1. Place the monitor face down on soft
and smooth surface taking care to avoid scratching or damaging the screen.
2. Hold the stand with both hands. Gently attach the stand to the VESA mount area until the latch locks the stand.

AC/DC Adapter

* DP

* Audio cable

* USB

* HDMI

* Different according to region
Note Use only AC/DC adapter model: Philips FSP180-AJBN3-T

2. Setting up the monitor Connecting to your computer

Fast Charger

1 2 3 4 5 6 7 9 10

4. Plug the power cord of your computer and your monitor into a nearby outlet.
5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.

USB Hub

Step 2

USB AB
Step 1
1 AC/DC power input 2 HDMI 1 input 3 HDMI 2 input 4 HDMI 3 input 5 Display port input 6 USB upstream 7 USB downstream 8 USB downstream/USB fast charger 9 Audio input 10 Earphone jack 11 Kensington anti-theft lock
Connect to PC 1. Connect the power cord to the back
of the monitor firmly. 2. Turn off your computer and unplug
its power cable. 3. Connect the monitor signal cable to
the video connector on the back of your computer.
6

2. Setting up the monitor
2.2 Operating the monitor
Description of the control buttons
Press more than 3 seconds to switch display power OFF. Press to switch display power ON. Access the OSD menu. Confirm the OSD adjustment. Adjust the OSD menu. Adjust the speaker volume. Change the signal input source Adjust the OSD menu. SmartImage: There are multiple selections: FPS, Racing, RTS, Gamer 1,Gamer 2, LowBlue Mode, SmartUniformity and Off. Return to previous OSD level.

Description of the On Screen Display

What is On-Screen Display (OSD)?

On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below:

Basic and simple instruction on the control keys

To access the OSD menu on this Philips Display simply use the single toggle button at the bottom of the Display bezel. The single button operates like a joystick. To move the cursor, simply toggle the button in four directions. Press the button to select desired option.

2. Setting up the monitor
The OSD Menu
Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.

Main menu Ambiglow

Sub menu
Off Ambiglow Auto Mode User Define

LowBlue Mode Input
Picture

On Off 1 HDMI 2.0 2 HDMI 2.0 3 HDMI 2.0 DisplayPort HDR
Brightness
Contrast Sharpness

Bright, Brighter, Brightest Bright, Brighter, Brightest White, Red,Rose,Magenta,Violet, Blue,Azure,Cyan,Aquamarine,Green, Chartreuse,Yellow,Orange 1, 2, 3,4
Normal, VESA HDR 600, Off 0~100 0~100 0~100

SmartResponse

Off, Fast, Faster, Fastest

SmartContrast SmartFrame

PIP/PBP SmartSize

Gamma Pixel Orbiting Over Scan
PIP / PBP Mode PIP/ PBP Input PIP Size PIP Position Swap
Panel Size

Audio

1:1 Aspect Volume
Stand-Alone

On, Off
On, Off Size: 1, 2, 3, 4, 5, 6, 7 Brightness: 0~100 Contrast: 0~100 H. position V. position 1.8, 2.0, 2.2, 2.4, 2.6 On, Off On, Off Off, PIP, PBP 1 HDMI 2.0 , 2 HDMI 2.0 , 3 HDMI 2.0, DisplayPort Small, Middle, Large Top-Right, Top-Left, Bottom-Right, Bottom-Left
17”: (5:4) 19”: (5:4) 19”W: (16:10) 22”W: (16:10) 18.5W”: (16:9) 19.5”W: (16:9) 20”W: (16:9) 21.5”W: (16:9) 23”W: (16:9) 24”W: (16:9) 27”W: (16:9) 31.5″W(16:9)
0~100
On, Off

Mute Audio Source DTS

On, Off
Audio In, HDMI1,HDMI2, HDMI3, DisplayPort On, Off

100Hz, 330Hz, 1KHz, 3.3KHz, 10KHz

Color
Language OSD Settings Setup

Mobile Phone

On, Off

Color Temperature sRGB

Native, 5000K, 6500K, 7500K, 8200K, 9300K, 11500K

User Define

Red: 0~100

Green: 0~100

Blue: 0~100

English, Deutsch, Español, , Français, Italiano, Maryar Nederlands, Português, Português do BrasilPolski , SvenskaSuomiTürkçeCestina, ,

Horizontal

0~100

Vertical

0~100

Transparency

Off, 1, 2, 3, 4

OSD Time Out

5s, 10s, 20s, 30s, 60s

Resolution Notification

On, Off

Adaptive Sync

On, Off

Low Input Lag

On, Off

Reset Information

Yes, No

2. Setting up the monitor Resolution notification
This monitor is designed for optimal performance at its native resolution, 3840 × 2160 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 3840 × 2160 @ 60 Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
Physical Function Tilt
20° -5°
Height adjustment
110mm
Warning · To avoid potential screen damage,
such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. · Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

2.3 MultiView

What is it?
Multiview enables active dual connect and view so that you can work with multiple devices like PC and Notebook side-by-side simultaneously, making complex multi-tasking work a breeze.

Why do I need it?
With the ultra high resolution Philips MultiView display, you can experience a world of connectivity in a comfortable way in the office or at home. With this display, you can conveniently enjoy multiple content sources at one screen. For example: You may want to keep an eye on the live news video feed with audio in the small window, while working on your latest blog, or you may want to edit an Excel file from your Ultrabook, while logged into secured company intranet to access files from a desktop.

How to enable MultiView by OSD menu?

PIP/PBP Mode

Off

PIP/PBP Input

PIP

PIP Size

PBP

PIP Position Swap

1. Toggle to the right to enter OSD Menu Screen.

2. Setting up the monitor
2. Toggle to the up or down to select main menu [PIP / PBP], then toggle to the right to confirm.
3. Toggle to the up or down to select [PIP / PBP Mode], then toggle to the right.
4. Toggle to the up or down to select [PIP], [PBP], then toggle to the right to confirm your selection.
5. Now you can move backward to set the [PIP/PBP Input], [PIP size], [PIP Position] or [Swap].
6. Toggle to the right to confirm your selection.
MultiView in OSD menu · PIP / PBP Mode:There are 2 modes
for MultiView: [PIP] and [PBP].
[PIP]: Picture in Picture

Open up a sub-window of another signal source.

B A (main)

When the sub source is not detected:

A B (main)

[PBP]: Picture by Picture

Open up a sub-window

side-by-side of another

signal source.

A B (main)

When the sub source is

not detected:

B A (main)

Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode.
· PIP / PBP Input: There are four different video input to choose as the sub display source: [1 HDMI 2.0], [2 HDMI 2.0], [3 HDMI 2.0] and [DisplayPort].
· PIP Size: When PIP is activated, there are three sub-window sizes to choose: [Small], [Middle], [Large].
B
Small Middle
A Large (main)

· PIP Position: When PIP is activated, there are two sub-window positions
to choose.

Top-Right

Bottom-Right

B A (main)

A (main) B

Top-Left

Bottom-Left

B A (main)

A (main) B

· Swap: The main picture source and the sub picture source swapped on the display.
Swap A and B source in [PIP] mode:

A (main)

A B (main)

2. Setting up the monitor Swap A and B source in [PBP] mode:

A B (main)

B A

(main)

· Off: Stop MultiView function.
A (main)
2.4 Remove the Base Assembly for VESA Mounting
Before you start disassembling the Display base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on soft
and smooth surface taking care to avoid scratching or damaging the screen.

Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4 x 8mm. Always contact manufacturer for wallmount installation.
100mm 100mm

2. While keeping the release button pressed, tilt the base and slide it out.

0°

90°

-5°

* Display design may differ from those illustrated.
Warning
· To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
· Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
11

3. Image Optimization
3. Image Optimization
3.1 SmartImage
What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you’re working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance.
Why do I need it? You want a monitor that delivers optimized display all your favorite types of content, SmartImage software dynamically adjust brightness, contrast, color and sharpness in real time to enhance your monitor viewing experience.
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, SmartImage dynamically enhances the contrast, color saturation and sharpness of images to enhance the contents being displayed – all in real time with the press of a single button.
How to enable SmartImage?

1. Toggle to the left to launch the SmartImage on screen display.
2. Toggle to the up or down to select among FPS, Racing, RTS, Gamer1, Gamer2, LowBlue Mode, SmartUniformity and Off.
3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also toggle to the left to make confirmation.
There are multiple modes to select: FPS, Racing, RTS, Gamer1, Gamer2, LowBlue Mode, SmartUniformity and Off.
SmartImageGAME
FPS
Racing
RTS
Gamer 1
Gamer 2
LowBlue Mode
SmartUniformity

· FPS: For playing FPS (First Person Shooters) games. Improves dark theme black level details.
· Racing: For playing Racing games. Provides fastest response time and high color saturation.
· RTS: For playing RTS (Real Time Strategy) games, a user-selected portion can be highlighted for RTS games (through SmartFrame). The picture quality can be adjusted for the highlighted portion.
· Gamer 1: User’s preference settings saved as Gamer 1.
· Gamer 2: User’s preference settings saved as Gamer 2.
· LowBlue Mode: LowBlue Mode for easy on-the-eyes productivity

3. Image Optimization
Studies have shown that just as ultra-violet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. · SmartUniformity: Fluctuations in brightness and color on different parts of a screen are a common phenomenon among LCD displays. Typical uniformity is measured around 75-80%. By enabling Philips SmartUniformity feature, display uniformity is increased to above 95%. This produces more consistent and true images. · Off: No optimization by SmartImageGAME.
Note
Philips LowBlue mode, mode 2 compliance with TUV Low Blue Light certification, you can have this mode by simply press the hotkey , then press
to select LowBlue Mode, see above
SmartImage selection steps.

3.2 SmartContrast
What is it?
Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor’s contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds.
Why do I need it?
You want the very best visual clarity and viewing comfort for every type of content. SmartContrast dynamically controls contrast and adjusts backlighting for clear, crisp, bright gaming and video images or displays clear, readable text for office work. By reducing your monitor’s power consumption, you save on energy costs and extend the lifetime of your monitor.
How does it work?
When you activate SmartContrast, it will analyse the content you are displaying in real time to adjust colors and control backlight intensity. This function will dynamically enhance contrast for a great entertainment experience when viewing videos or playing games.

4. Ambiglow
4. Ambiglow
Ambiglow
What is it? Ambiglow adds a new dimension to your viewing experience. This patented Philips technology uses two rows of bright LED’s projecting a glow of light on the bottom of the display. The innovative Ambiglow processor continuously adjusts the overall color and brightness of the light to match the on screen image. User options like Auto mode, 3 step brightness settings allow to adjust the ambiance to your liking and available wall surface. Whether you are playing fast 3D or 2D games, or watching movies, Philips Ambiglow offers you a unique and immersive viewing experience.
How does it work? It is recommended that you dim the lighting conditions in your room for maximum effect. Ensure that Ambiglow is set to “on” mode. Start a movie, or play a game from your computer. The monitor will react with appropriate colors creating a halo effect, overall matching the image on the screen. You can also manually select Bright, Brighter, Brightest mode or ambiglow function

off mode depending on your preference which helps reduce eye fatigue under prolonged usage.

How to enable Ambiglow
Ambiglow function can be selected through OSD menu by pressing right button to choose and pressing right button again to confirm the selection:

1. Press right button.

2. Select [Ambiglow].

3. To switch Ambiglow off, or choose Ambiglow, select [Auto Mode] or [User Define].

5. Adaptive Sync
5. Adaptive Sync
Adaptive Sync
PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.” Gamers can fix tearing with a feature called “v-sync,” but the image can become jerky as the GPU waits on the monitor to call for an update before delivering new pictures.
The responsiveness of mouse input and overall frames per second are reduced with v-sync, too. AMD Adaptive SyncTM technology eliminates all of these problems by letting the GPU update the monitor the moment a new picture is ready, leaving gamers with unbelievably smooth, responsive, tearing-free games.
Followed by the graphic card that are compatible.
· Operating system · Window7/8/8.1/10
· G raphic Card: R9 290 Series & R7 260 Series · AMD RadeonTM RX 480 · AMD RadeonTM RX 470 · AMD RadeonTM RX 460 · Radeon Pro Duo · AMD Radeon R9 300 Series · AMD Radeon R9 Fury X · AMD Radeon R9 360

· AMD Radeon R7 360 · AMD Radeon R9 295X2 · AMD Radeon R9 290X · AMD Radeon R9 290 · AMD Radeon R9 285 · AMD Radeon R7 260X · AMD Radeon R7 260 · Processor 2014 A-Series Desktop and Mobility APUs
· AMD PRO A12-9800 · AMD PRO A12-9800E · AMD PRO A10-9700 · AMD PRO A10-9700E · AMD PRO A8-9600 · AMD PRO A6-9500 · AMD PRO A6-9500E · AMD PRO A12-8870 · AMD PRO A12-8870E · AMD PRO A10-8770 · AMD PRO A10-8770E · AMD PRO A10-8750B · AMD PRO A8-8650B · AMD PRO A6-8570 · AMD PRO A6-8570E · AMD PRO A4-8350B · AMD A10-7890K · AMD A10-7870K · AMD A10-7850K · AMD A10-7800 · AMD A10-7700K · AMD A8-7670K · AMD A8-7650K · AMD A8-7600 · AMD A6-7400K

6. HDR
6. HDR

HDR Settings in Windows10 system.

Steps

1. Right click on the desk top, enter to Display settings.

2. Select the display/monitor.

STEP 5

3. Adjust resolution to 3840 x 2160

4. Turn the “HDR and WCG” to on mode.

5. Adjust Brightness for SDR content.

Note Windows10 edition is required; always upgrade to the most updated version.
Below linkage is for the further more information from mircrosoft official website.
https://support.microsoft.com/enau/help/4040263/windows-10-hdradvanced-color-settings

STEP 1

STEP 2

STEP 4 STEP 3

7. Technical Specifications
7. Technical Specifications

Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio (typ.) Optimum Resolution Viewing Angle Picture Enhancement Vertical Refresh Rate Horizontal Frequency sRGB LowBlue Mode SmartUniformity Delta E Monitor Colors Color gamut Ambiglow Flicker free HDR Adaptive sync Connectivity Signal Input Input Signal Audio In/Out USB Convenience Built-in speaker MultiView
OSD Languages
Other Convenience Plug & Play Compatibility Stand Tilt Height adjustment
Power
Consumption

MVA LED 31.5″ W (80 cm) 16:9 0.181 x 0.181 mm 3000:1 3840×2160 @ 60Hz 178° (H) / 178° (V)(typ.) @ C/R > 10 SmartImage 40Hz – 60Hz 30kHz – 160kHz YES YES YES YES 1.07 Billion YES YES YES PC HDR 600 certified YES
DisplayPort 1.4 , HDMI 2.0 x 3(HDCP) Separate Sync PC audio-in & headphone out with DTS USB3.0x4 (including 2 fast charging)
5 W x 2 PIP/PBP mode, 2×devices English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean VESA mount(100 × 100 mm), Kensington Lock DDC/CI, sRGB, Windows 10/8.1/8/7, Mac OSX
-5° / +20° 110mm

AC Input Voltage at 100VAC , 50Hz

AC Input Voltage at 115VAC , 60Hz

AC Input Voltage at 230VAC, 50Hz

7. Technical Specifications
Normal Operation Sleep (Standby mode) Off mode
Heat Dissipation*
Normal Operation
Sleep (Standby mode)
Off mode
Power LED indicator
Power Supply Dimension Product with stand (WxHxD) Product without stand (WxHxD) Product with packaging (WxHxD) Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental ROHS Packaging Specific Substances

71.93 W (typ.)

72.03 W (typ.) 72.13 W (typ.)

<0.5 W (typ.)

<0.3 W (typ.)

AC Input

Voltage at

100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz

245.49 BTU/hr 245.84 BTU/hr 246.18 BTU/hr

(typ.)

<1.71 BTU/hr

(typ.)

<1.02 BTU/hr

(typ.)

On mode: White, Standby/Sleep mode: White

(blinking)

External, 100-240VAC, 50-60Hz

728 x 604 x 206 mm
728 x 432 x 58 mm
822 x 580 x 394 mm
7.21 kg 5.45 kg 11.02 kg

0°C to 40 °C 20% to 80% 700 to 1060hPa -20°C to 60°C 10% to 90% 500 to 1060hPa

YES 100 % recyclable 100 % PVC BFR free housing

7. Technical Specifications
Cabinet Color Finish

Black Glossy

Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.

7. Technical Specifications
7.1 Resolution & Preset Modes

Maximum Resolution 3840× (DP 1.4/HDMI 2.0+HDR)
Recommended Resolution
3840× (DP 1.4/HDMI 2.0+HDR)

H. freq (kHz) 31.47 31.47 35.00 37.86 37.50 37.88 46.88 48.36 60.02 44.77 63.89 79.98 55.94 65.29 67.50 88.79 133.29
133.312

Resolution V. freq (Hz)

720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1280x 720 1280 x 1024 1280 x 1024 1440 x 900 1680 x 1050 1920 x 1080 2560 x 1440 1920 x 2160 PBP mode 3840 x 2160

70.09 59.94 66.67 72.81 75.00 60.32 75.00 60.00 75.03 59.86 60.02 75.03 59.89 59.95 60.00 59.95 59.99
59.99

· The highest supporting screen resolution on HDMI is 3840 x 2160 , but it always depends on your capability of graphics card and BluRay/video players.

N ote
· Please notice that your display works best at native resolution of 3840 x 60Hz. For best display quality, please follow this resolution recommendation.

8. Power Management
8. Power Management

If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will ‘wake up’ automatically. The following table shows the power consumption and signaling of this automatic power saving feature:

Power Management Definition

VESA Mode

Video H-sync V-sync Power Used

LED Color

Active ON Yes

Yes

72.03 W (typ.), 175.86 W (max.)

White

Sleep (Standby OFF No
mode)

<0.5 W (typ.)

White (blink)

Off mode OFF –

–

<0.3 W (typ.) OFF

The following setup is used to measure power consumption on this monitor.
· Native resolution: 3840 x 2160 · Contrast: 50% · Brightness: 90% · Color temperature: 6500k with full
white pattern
Note This data is subject to change without notice.

9. Customer care and warranty
9. Customer care and warranty
9.1 Philips’ Flat Panel Monitors Pixel Defect Policy
Philips strives to deliver the highest quality products. We use some of the industry’s most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT Monitor panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT Monitor panel must exceed these acceptable levels. For example, no more than 0.0004% of the sub pixels on a monitor may be defective. Furthermore, Philips sets even higher quality standards for certain types or combinations of pixel defects that are more noticeable than others. This policy is valid worldwide.
subpixel

of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors.
Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category.
Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or ‘on’. That is, a bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern. There are the types of bright dot defects.
One lit red, green or blue sub pixel.

pixel
Pixels and Sub pixels A pixel, or picture element, is composed of three sub pixels in the primary colors

Two adjacent lit sub pixels: – Red + Blue = Purple – Red + Green = Yellow – Green + Blue = Cyan (Light Blue)

9. Customer care and warranty
Three adjacent lit sub pixels (one white pixel).
Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or ‘off’. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. These are the types of black dot defects.

Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.
Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.

9. Customer care and warranty
BRIGHT DOT DEFECTS 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* Total bright dot defects of all types
BLACK DOT DEFECTS 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects* Total black dot defects of all types
TOTAL DOT DEFECTS Total bright or black dot defects of all types
Note 1 or 2 adjacent sub pixel defects = 1 dot defect

ACCEPTABLE LEVEL 10 2 1
>10mm 10
ACCEPTABLE LEVEL 15 or fewer 5 or fewer 2 >10mm 15 or fewer
ACCEPTABLE LEVEL 15 or fewer

9. Customer care and warranty
9.2 Customer Care & Warranty
For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Regulation & Service Information Manual.
For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.

If you wish to make use of this service, please be sure to purchase the service within 30 calendar days of your original purchase date. During the extended warranty period, the service includes pickup, repair and return service, however the user will be responsible for all costs accrued. If the Certified Service Partner cannot perform the required repairs under the offered extended warranty package, we will find alternative solutions for you, if possible, up to the extended warranty period you have purchased.

Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details.

Philips Customer Care Center number listed below.

· Local

· Extended Warranty

Standard

Period

Warranty

Period

· Depend

· + 1 Year

on different

Regions

· + 2 Years

· + 3 Years

· Total Warranty Period
· Local Standard warranty period +1
· Local Standard warranty period +2
· Local Standard warranty period +3

**Proof of original purchase and extended warranty purchase required.

Note Please refer to Regulation & Service Information Manual for regional service hotline, which is available on the Philips website support page.

10. Troubleshooting & FAQs
10.Troubleshooting & FAQs
10.1 Troubleshooting
This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
Common Problems
No Picture (Power LED not lit) · Make sure the power cord is
plugged into the power outlet and into the back of the monitor. · First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position.
No Picture (Power LED is White) · Make sure the computer is turned
on. · Make sure the signal cable is
properly connected to your computer. · Make sure the monitor cable has no bent pins on the connect side. If yes, repair or replace the cable. · The Energy Saving feature may be activated
Screen says

· Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick Start Guide).
· Check to see if the monitor cable has bent pins.

· Make sure the computer is turned on.
Visible signs of smoke or sparks
· Do not perform any troubleshooting steps
· Disconnect the monitor from mains power source immediately for safety
· Contact with Philips customer service representative immediately.
Imaging Problems
Image vibrates on the screen
· Check that the signal cable is properly securely connected to the graphics board or PC.
Image appears blurred, indistinct or too dark
· Adjust the contrast and brightness on On-Screen Display.
An “after-image”, “burn-in” or “ghost image” remains after the power has been turned off.
· Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging ” or “ghost imaging”, on your screen. “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in monitor panel technology. In most cases, the “Burn-in” or “afterimaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
· Always activate a moving screen saver program when you leave your monitor unattended.
· Always activate a periodic screen refresh application if your monitor will display unchanging static content.
· Failure to activate a screen saver, or a periodic screen refresh application

10. Troubleshooting & FAQs
may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.
Image appears distorted. Text is fuzzy or blurred. · Set the PC’s display resolution
to the same mode as monitor’s recommended screen native resolution.
Green, red, blue, dark, and white dots appears on the screen · The remaining dots are normal
characteristic of the liquid crystal used in today’s technology, Please refer the pixel policy for more detail.
Audio problem
No sound · Check if audio cable is connected to
PC and monitor correctly. · Ensure audio is not muted. Press
OSD “Menu”, select “Audio” then “Mute”. Check it on “Off” position. · Press “Volume” in OSD main control to adjust the volume.
10.2 General FAQs
Q1: When I install my monitor what should I do if the screen shows ‘Cannot display this video mode’?
Ans.: Recommended resolution for this monitor: 3840 x 2160 @ 60 Hz.
· Unplug all cables, then connect your PC to the monitor that you used previously.
· In the Windows Start Menu, select Settings/Control Panel. In the Control Panel Window, select the Display icon. Inside the Display

Control Panel, select the ‘Settings’ tab. Under the setting tab, in box labelled ‘desktop area’, move the sidebar to 3840 x 2160 pixels.
· Open ‘Advanced Properties’ and set the Refresh Rate to 60 Hz, then click OK.
· Restart your computer and repeat step 2 and 3 to verify that your PC is set at 3840 x 2160 @ 60 Hz.
· Shut down your computer, disconnect your old monitor and reconnect your Philips monitor.
· Turn on your monitor and then turn on your PC.
Q2: What is the recommended refresh rate for monitor?
Ans.: Recommended refresh rate in monitors is 60 Hz, In case of any disturbance on screen, you can set it up to 75 Hz to see if that removes the disturbance.

Q3: What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .icm)?
Ans.: These are the driver files for your monitor. Follow the instructions in your user manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically.

Q4: How do I adjust the resolution?

Ans.:

Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the “Display properties”.

10. Troubleshooting & FAQs
Q5: What if I get lost when I am making monitor adjustments via OSD?
Ans.: Simply press the button, then select [Reset] to recall all the original factory settings.
Q6: Is the monitor screen resistant to scratches?
Ans.: In general it is recommended that the panel surface is not subjected to excessive shocks and is protected from sharp or blunt objects. When handling the monitor, make sure that there is no pressure or force applied to the panel surface side. This may affect your warranty conditions.
Q7: How should I clean the monitor surface?
Ans.: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.
Q8: Can I change the color setting of my monitor?
Ans.: Yes, you can change your color setting through OSD control as the following procedures:
· Press button to show the OSD (On Screen Display) menu
· Press button to select the option [Color] then press button to enter color setting, there are three settings as below.
1. Color Temperature: Native, 5000K, 6500K, 7500K, 8200K, 9300K and 11500K. With settings in the 5000K range the panel appears “warm, with a redwhite color tone”, while a

11500K temperature yields “cool, bluewhite toning”.
2. sRGB: This is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc).
3. User Define: The user can choose his/her preference color setting by adjusting red, green, blue color.
Note A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K.
Q9: Can I connect my monitor to any PC, workstation or Mac?
Ans.: Yes. All Philips monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system. Please contact your Philips sales representative for more information.
Q10: Are Philips monitors Plug-andPlay?
Ans.: Yes, the monitors are Plugand-Play compatible with Windows10/8.1/8/7, Mac OSX
Q11: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in monitor panels?
Ans.: Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or

10. Troubleshooting & FAQs
“ghost imaging”, on your screen. “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in monitor panel technology. In most cases, the “Burn-in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
Always activate a moving screen saver program when you leave your monitor unattended.
Always activate a periodic screen refresh application if your monitor will display unchanging static content.

Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “afterimage” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.

Q12: Why is my Display not showing sharp text, and is displaying jagged characters?
Ans.: Your monitor works best at its native resolution of 3840 x 2160 @ 60 Hz. For best display, please use this resolution.

Q13: How to unlock/lock my hot key?

Ans.:

Please press for 10 seconds to unlock/lock the hot key, by doing so, your monitor pops out “Attention” to show the unlock/ lock status as shown below illustrators.

Q14: Where can I find Regulation & Service Information Manual mentioned in EDFU?
Ans.: Regulation & Service Information Manual can be download on the Philips website support page.

2019 © TOP Victory Investments Ltd. All rights reserved.
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Specifications are subject to change without notice.
Version: M6326ME1T

Download

Philips 326M6 Momentum 32 Inch UHD TV User Manual

Was this manual helpful?