SILVERCREST SFM 4 C4 Wireless Optical Mouse User Manual

SILVERCREST SFM 4 C4 Wireless Optical Mouse

DESCRIPTION OF SIGNAL WORDS

WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.

CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

NOTICE indicates information considered important, but not hazard-related (e.g. messages related to property damage).

CUSTOMER SERVICE

Call customer service at 1 (844) 543-5872
Visit the Website Customer Service Platform at www.lidl.com/contact-us

Visit a LIDL store for further assistance. Please have your IAN number ready.

IAN 387796_2101

LIST OF PICTOGRAMS USED

NOTE: This symbol with the signal word “NOTE“ provides additional useful information.

Direct current / voltage

Warning against optical radiation

WIRELESS OPTICAL MOUSE

Introduction

Congratulations on your purchase. You have selected a quality product. The instructions for use are a part of the product. They contain important information about the safety, use and disposal of the product. Before using the product, please learn about all the safety information and usage instructions. Only use the product as described and for the specified applications. If you lend the product to someone else, please also give all the instructions.

Intended use

This WIRELESS OPTICAL MOUSE (hereinafter referred to as “product”)is an information technology device and is designed as an input device for computers. This product must not be used outside of closed rooms. This product is not intended for use in companies or for other commercial uses (e.g. office productivity applications). Use this product only in the home for private purposes Any other use is considered improper. Any claims resulting from improper use or due to unauthorised modification of the product will be considered un-warranted. Any such use is at your own risk.

Trademark notices
  • USB® is a registered trademark of USB Implementers Forum, Inc.
  • Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.
  • Mac OS is trademarks of Apple Inc., registered in the U.S. and other countries.
  • The SilverCrest trademark and trade name is the property of their respective owners.
  • Any other names and products are trademarks or registered trademarks of their respective owners.

Scope of delivery

  • 1 Wireless optical mouse
  • 1 USB dongle
  • 1 CD-ROM installation software 2 Batteries (AA)
  • 1 Instruction for use

IMPORTANT SAFETY NOTES

READ ALL INSTRUCTIONS. KEEP FOR FUTURE REFERENCE. INCLUDE ALL DOCUMENTATION WHEN PASSING THIS PRODUCT ON TO OTHERS.
DANGER TO LIFE AND RISK OF ACCIDENT FOR INFANTS AND CHILDREN!
RISK OF SUFFOCATION! Never leave children unsupervised with the packaging material. The packaging material poses a suffocation hazard. Children frequently underestimate the dangers. The packaging material is not a toy.

  • This product may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities or lacking experience and/or knowledge, so long as they are supervised or instructed in the safe use of the product and understand the associated risks. Do not allow children to play with the product. Cleaning and user maintenance should not be performed by children without supervision. The product is not a toy.

Warning: Some of the provided parts can be swallowed. If a part is swallowed, seek immediate medical attention.

Warning Radio interference:

  • Switch the product off on aeroplanes, in hospitals, service rooms, or near medical electronic systems. The wireless signals transmitted could impact the functionality of sensitive electronics.
  • Keep the product at least 7.87 in (20 cm) from pacemakers or implantable cardioverter defibrillators, as the electromagnetic radiation may impair the functionality of pacemakers.
  • The radio waves transmitted could cause interference in hearing aids.
  • Do not place the product near flammable gasses or potentially explosives areas (e.g. paint shops) with the wireless components on, as the radio waves emitted can cause explosions and fire.
  • The range of the radio waves varies by environmental conditions. In the event of wireless data transmission, unauthorised third parties receiving the data cannot be excluded.

Warning: Keep batteries out of reach of children. If accidentally swallowed seek immediate medical attention.

WARNING EXPLOSION HAZARD!
Never recharge non-rechargeable batteries. Do not short-circuit batteries or open them. Overheating, fire or bursting can be the result. Never throw batteries into fire or water. Do not exert mechanical loads to batteries.

WEAR PROTECTIVE GLOVES! Leaked or damaged batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.

Safety warnings for batteries
  • When used correctly, cells and batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire, or explosion.
  • Store batteries in a dry place at room temperature. Batteries are sensitive to high and low temperatures. Such thermal exposure may lead to leakage, fire, or explosion.
  • Keep cells and batteries out of reach of children, especially small batteries. Ingestion may lead to choking or acute and serious personal injury.
  • Keep cells or batteries clean and dry both during use and storage. Wipe metal terminals with a soft, dry cloth if they become dirty.
  • Immediately seek medical attention if a cell or battery has been swallowed. Also, contact your local poison control center.
  • In the event that the electrolyte comes into contact with the skin or eyes, immediately flush with fresh water for at least 15 minutes and seek medical attention.
  • Store unused batteries in their original packaging or in safe place and away from metal objects that may short-circuit them.
  • Exercise care in handling batteries in order to prevent shorting with conducting materials, such as rings, coins, bracelets, and keys.
  • The battery or the conductor can overheat and cause burns, leakage, fire, or explosion. Clean the battery contacts and also those of the product prior to battery installation. Keep the contacts clean.
  • Remove batteries from the product that will not be used for an extended period of time (months or longer).
  • Remove discharged batteries from product promptly to avoid possible damage from leakage.
  • Choose the proper battery for the intended application.
  • Always take care to correctly insert batteries observing (+) and (-) polarity marks on the battery and the product for which it is intended. Proper polarity must be observed to avoid damage to either product or batteries.
  • Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types, capacities, or manufacturers.
  • Never heat batteries in order to revive them.

WARNING

  • Never charge a battery unless the battery label specifically states the battery is rechargeable. Charging a non-rechargeable battery, may result in leakage, fire, or explosion.
  • Do not drop or subject the cell or battery to strong mechanical shock.
  • Batteries should not be disassembled, crushed, punctured, or otherwise mutilated. Such abuses may result in leakage, fire, or explosion.
  • Do not dispose of the battery in a fire. Failure to observe this precaution may result in an explosion.
  • Dispose of batteries properly and in accordance with government regulations.
    RISK OF PROPERTY DAMAGE
  • Check the product before every use! Discontinue use if any damage to the product is detected!
  • This product does not contain any parts which can be serviced by the user.
  • Do not place burning candles or other open fire on or next to the product.
  • Sudden temperature changes may cause condensation inside the product. In this case, allow the product to acclimate for some time before using it again to prevent short circuits!
  • Do not operate the product near heat sources, e.g. radiators or other devices emitting heat!
  • Do not throw the product into fire and do not expose to high temperatures.
  • Never open the product!! It has no internal parts requiring maintenance.
    CAUTION Ensure that:
  • no direct heat sources (e.g. heating) can affect the product.
  • any contact with splashed and dripping water and corrosive liquids is avoided and the product is not operated in the vicinity of water. In particular, the product should never be submerged in liquid; do not place any vessels filled with liquid, for example, vases or drinks, on or near the product.
  • the product is not used in the immediate vicinity of magnetic fields (e.g. speakers).
  • no fire sources (e.g. burning candles) are placed on or near the product.
  • no objects are inserted into the interior of the product.
  • the product is never subjected to excessive shocks and vibrations.
    Take care to avoid injury to eyes and skin when in the vicinity of optical radiation
    NOTICE: The user must take regular breaks during the use of the product, in case of pain in the hands, arms or shoulder and neck area the work must be interrupted and some stretching exercises must be done.
  • It is necessary to repair the product if they have been damaged in any way, for example, if the housing is damaged, if liquid or objects have penetrated the product or if the product has been exposed to rain or moisture.
  • Repair work is also required if the product is not working properly or has been dropped. If smoke is produced, or there are any unusual sounds or smells, turn the product off immediately. In such cases, the product should not be used until they have been inspected by authorised service personnel. Only have the product repaired by qualified personnel. Never open the housing of the product.
  • Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user‘s authority to operate the product.
    NOTE: This product has been tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product causes harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the product and receiver.
    • Connect the equipment to an outlet on a different circuit than the one the receiver is connected to.
    • Consult the dealer or an experienced radio / TV technician for help.
  • This product complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
    • This product may not cause harmful interference.
    • This product must accept any interference received, including interference that may cause undesired operation.
  • The Lidl US, LLC is not responsible for interference with radios or televisions due to unauthorised modification of the product.
  • The Lidl US, LLC further assumes no liability for using or replacing cables and products not distributed by Lidl US, LLC. The user of the product is fully responsible for correcting interference caused by such unauthorised modification of the product, as well as replacement of such products.

Description of parts

  1. Right mouse button
  2. DPI button
  3. Backward button
  4. Forward button
  5. Left mouse button
  6. Scroll wheel and middle mouse button
  7. Battery compartment cover
  8. Instructions for use
  9. USB dongle
  10. Software CD
  11. 2 x AA batteries

Technical data

  • Voltage supply: 2 x 1.5 V, AA batteries
  • Operation time: 3 to 6 months (Alkaline battery)
  • Operating Systems: Windows® 7 / 8 / 10, XP, Vista
  • Resolution: 1000 / 1500 / 2000 dpi
  • Wireless range: 5 m
  • USB version: 2.0
  • Hardware: 1 free USB port available
  • Operating temperature: +41°F to +95°F (5°C to 35 °C)
  • Storage temperature: +32°F to +113°F (0°C to 45 °C)
  • Storage humidity: 10 to 70 % RH
  • Dimension (L x W x H): 4.02 in x 2.64 in x 1.61 in (10.2 cm x 6.7 cm x 4.1 cm)
  • Net weight: 0.143 lbs, (65 g)

The specification and design may be changed without notification.

Before use

NOTE:

  • Before use, verify the package contents are complete and undamaged!
  • All parts have to be unpacked and the packaging material has to be removed completely.
  • Setting up your mouse – inserting/replacing the battery
  • Remove the battery compartment cover 7 .
  • Insert 2 AA batteries 11 into the battery compartment.
  • Ensure that the polarities are correct (+/–).
  • Reinsert the battery compartment cover 7 and push it down until it locks in place.

Operation

  • Connecting the USB dongle 9: Slot the USB dongle 9 into a spare USB port on your computer.
  • Turn your computer on. The necessary drivers are automatically installed.
  1. Right mouse button: Provides traditional mouse click functions.
  2. DPI button: (1000 / 1500 / 2000– Click button once, then change DPI setting to next DPI value). The default DPI setting is 1500 dpi. Choose a setting that is comfortable for you.
  3. Backward button
  4. Forward button
  5. Left mouse button: Provides traditional mouse functions like click, double click and drag.
  6. Scroll wheel and middle mouse button: Roll up or down to scroll through pages or documents.

Software installation

NOTE:

  • The software is not compatible with MAC OS.
  • You can also download the mouse installation software at www.Lidl-service.com. At this Lidl service website you have to input the product number IAN 387796_2101 to search for the software to download.

Software installation from CD

  1. Insert the provided Setup Disc into the computer’s CD rom.
  2. The installation process should start automatically.
  3. If this is not the case, start the file “SFM 4 C4 Mouse Setup.exe“ manually on the CD-ROM by double-clicking.
  4. Follow the installation instructions to complete the whole installation process.
  5. After installing and running the application software program, you will find the below user interface.

Configuration of the individual mouse buttons
You can use the software to control the functions of the mouse buttons customize to your wishes.

The configuration menu of the mouse appears.

  • Select on left column for which button you would like to change its setting. Here you can now setup each one button setting for those five individual buttons’ function.
  • Click on “Button Setting” and then select one function from the menu.
  • To activate the changes, click the “APPLY“ button
  • With the button “Restore defaults“ you can put the buttons of the wireless mouse back to the initial delivery state.

Below other tabs of this configuration menu contain the configuration options of the respective operating system. You can adjust mouse button setup to your desired mouse setting at “Advanced Setting”.

  • Pointer
  • Scrolling
  • Double-Click

Storage when not in use

  • Batteries must be removed before storage.
  • Store the product in a dry indoor location protected from direct sunlight, preferably in its original packaging.

Cleaning

  • Switch the product off before cleaning!
  • No acid, chafing or solvent cleaning agents should be used or the product can be damaged.
  • Only clean the outside of the product using a soft, dry cloth!
  • At persistent soiling, a mild cleaning agent can be used.

Troubleshooting

Problem
The product does not work properly.

Solution
Option 1:
Check if the battery is properly fitted.
Option 2: The battery needs to be replaced by a new one.
Option 3: Remove any other mouse connected to your computer and reconnect your mouse.

Disposal

Dispose of the packaging through your local recycling facilities and in compliance with all federal, state and local regulations. Please note the package markings regarding waste separation, indicated by abbreviations (a) and numbers (b), meaning: 1–7: plastics / 20–22: paper and cardboard / 80–98: composite materials.

Contact your local waste management authority for additional information on how to dispose of the used product. To help protect the environment, please dispose of the product properly when it has reached the end of its useful life, do not throw in the garbage. Information on collection sites and their opening hours is available from your local authority.

Improper disposal of batteries can damage the environment!

Never throw batteries in the garbage. They may contain toxic heavy metals and must be handled as special waste. The chemical symbols of heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead. Used batteries should therefore be disposed of through a local collection point.

Three year limited warranty

What does this warranty cover?
The warranty covers:

  • Damage, breakage or inoperability due to defect.
  •  Damage not caused by normal wear and tear or failure to follow the safety and maintenance instructions provided in the user manual.

What is not covered by the warranty?
The warranty does not cover damage caused by:

  • Normal wear and tear of the product, including fragile parts (such as switches, glass, etc.);
  • Improper use or transport;
  • Disregarding safety and maintenance instructions;
  • Accidents or acts of nature (e.g. lightning, fire, water, etc.);
  • Tampering with the product (such as removing cover, unscrewing screws etc.)

Consequential and incidental damages are also not covered under this warranty. However, some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.

What is the period of coverage and warranty resolution?
The warranty is for 3 years from the date of purchase. At our discretion, product will either be refunded or replaced.

What will we not do?
We will not:

  • Start a new warranty period upon product exchange;
  • Repair product.

How to process the warranty?
To initiate, please:

Call customer service at
1 (844) 543-5872

  • Visit the Website Customer Service Platform at www.lidl.com/contact-us
    or
  • Visit a LIDL store for further assistance

To ensure the quickest warranty return process, please have the following available:

  • The original sales receipt that includes the date purchased;
  • The product and manual in the original package;
  • A statement of the problem.

What must you do to keep the warranty in effect?

  • Retain the original receipt;
  • Follow all product instructions;
  • Do not repair or modify the product.

How does state law relate to this warranty?
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. All implied warranties are limited by the duration and terms of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.