VIKING CJSZ24R ZULU 24 24000mAh Car Jump Starter User Manual

VIKING CJSZ24R ZULU 24 24000mAh Car Jump Starter User Manual

Thank you for choosing the Jump Starter! Always follow  basic safety precautions when using electrical appliances.  Read all instructions carefully Please keep this instruction  manual for easy reference.

 

A. PRODUCT LAYOUT

 

B. OPERATION GUODANCE

Indicator Lights
Press the switch button to check the capacity of Jump Starter

When charging, indicator lights will flash one by one. The  number of solid indicator lights indicates the battery capacity of  Jump Starter. Full indicator lights are solid when charging is  pause or complete

Charging for Jump Starter itself

  1. Plug the home adaptor into the universal socket.
  2. Connect 12 V 2A input port of Jump Starter to the other end of  home adaptor.

Or

  1. Plug the car adaptor into the socket of cigarette lighter.
  2. Connect 12 V 2A input port of Jump Starter to the other end of car adaptor

function description:

  • LED button: long press the button for 6 seconds to turn on the light, and then click to switch the flash mode, SOS mode and turn off the light.
  • JUMP START button: press it twice to turn on 12V startup output, then press it for 6 seconds to turn on 24V startup output, and press it to turn off 12V/24V output.

Notes:

  1. Make sure that the customized working voltage of the vehicle or load is 12V or 24V before using the clamp (incorrect working voltage may damage  the equipment);
  2. Select the corresponding output voltage before using the clamp, and then connect the clamp to the vehicle or load (the positive and negative poles shall not be connected inversely);

Instructions:

  1. The flash of 12V/24V indicator indicates that the emergency power supply is undergoing self-test; After the buzzer makes a short sound, the indicator light is on, indicating that the starting output can start the vehicle normally.
  2. if the 12V/24V indicator is flashing and the buzzer is quick and short, it means that the starting power supply temperature is too  high, it should be stopped immediately and put in the ventilation  area until the normal temperature is restored.
  3. if the 12V/24V indicator light is flashing and the buzzer is slow and short, it means that the starting power supply voltage is too low or reverse charge occurs, it should be stopped immediately and charged in time if the power is low.
  4. if the 12V/24V indicator light is flashing and the buzzer is one long or two short, it means that the red/black clip of starting power supply has short circuit. The connection of red/black clip should be broken immediately;

For Jump Start Of 12Vor24V vehicle

  1. First, ensure that the power indicator is at least three cells; Press two seconds long to close all host output. Then insert the 12V or 24V switch into the host to ensure full contact with the host and insert the clamp.
  2. The positive pole of the battery is connected with the red clip and the negative pole of the battery is connected with the black CLIP
  3. Turn the starting switch to start position and start the car
  4. After starting the car, remove the battery clip(preferably within 30 seconds) and unplug the starting power
  5. Start 12V vehicle maximum output 600A/5 seconds, start 24V vehicle maximum output Out of 300A/ 5 seconds each startup must be spaced over 30 seconds.

 

C. PARTS LIST :

E.FAQ .
Q. How to turn off this appliance ?
A. This appliance will power off automatically when no load or  charging is complete

Q. How many times canthis appliance charge for my mobile phone?
A. 7 times at least for Iphone4 mobile phone.
PS: According to differrent types of mobile battery and battery  capacity, time of charging would be different.

Q. How long will this appliance take to charge my mobile phone
A. Approx. 1 hour.

Q. How long Will this appliance on a full charge to supply the Notebook?
A. 2-3hours

Q. How many times can this appliance on a full charge to start the vehicle?
A. Approx. 20 times.

Q. How long will the power of battery of this appliance remain?
A. 3-6 months, however, we suggest you recharge it every 3 months.

 

F. TROUBLE SHOOTING:

 

G.TOXIC AND HARMFUL SUBSTANCES:

 

H. Warning:

  1. Do remove the product from the vehicle within 30s after the vehicle started.lf not,it may lead dangerous!
  2. Do not connect the two clamps.lf not, it may lead dangerous.
  3. Do not decompose product.lf not,it may lead dangerous!

1 . WARRANTY INFORMATION:

  1. We offer a limited warranty for this product against any defects in material and workmanship for a period of 6 months from the date of purchase by the end user/ consumer.The conditions of the warranty are as follows:
  2. The warranty is only valid upon presentation of the original receipt (from dealer/retailer) by the original purchaser with the product to be repaired or replaced
  3. The warranty is void if the serial number, date of purchase and label has
  4. The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, misuse, modification or  repairs hy unauthorized third parties
  5. We do not assume responsibility for any loss or damage incurred during shipment or as a result of a force majeure
  6. We are not liable for any incidental or consequential damages arising from the use or misuse of this product
  7. All warranty claims are limited to repair or replacement of the defective product and at the sole discretion of us
  8. lf wa repair or replace the product, the product will be covered for the remaining time of the original warranty period. Repair or replacement may involve the use of reconditioned units which are equivalent in function. Replaced part or product becomes the property of us
  9. Consumable components such as batteries are not covered by the warranty

VIKING products are distributed and serviced by: BONA SPES s.r.o.
Řepčín 250, Olomouc 77900, Czechia
VAT No.: 3476774, +420 777 109 009, www.best-power.cz,

 

Read More About This Manual & Download PDF: