Lenovo TB-8506X Portable Tablet Computer User Guide

Lenovo TB-8506X

Regulatory Notice V1.0

Lenovo Regulatory Notice

• Read first – regulatory information

Read this document before using your device. This device complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Install and use your device according to the following instructions.
The latest version of this Regulatory Notice has also been uploaded on the Lenovo Support Web site. To refer to it, go to http://support.lenovo.com/, and then click Guides & Manuals.

• USA – Federal Communications Commission (FCC)

I. Integrated WLAN & Bluetooth function

• FCC ID: O57TB8506X

Wireless LAN function marketed in the USA and Canada do not support nor function in the extended channels (12ch,13ch).

i) The FCC RF Exposure compliance:
The radiated energy from the antenna conforms to the FCC limit of the SAR (specific absorption rate) requirement regarding 47 CFR Part 2 section 1093.

ii) FCC ID of wireless function:
The FCC ID for the Integrated WLAN & Bluetooth & WWAN function is indicated on the label affixed on the bottom side of your device.

iii) Radio Frequency interference requirements:

• This product has been tested and found to comply with the limits for a Class B digital device pursuant to FCC Part 15 Subpart B and C and E.

II. Simultaneous use of RF transmitters

Please make sure of the following conditions on use of wireless features:

1. When you use any other RF option device, all other wireless features including the above integrated devices in your Lenovo device are required to be turned off.
2. Users must follow the RF Safety instructions on wireless option devices that are included in the RF option device’s user’s manual.

For model: Lenovo TB-8506X

• European Union (EU) / United Kingdom (UK) compliance

UK Declaration of Conformity

Hereby, Lenovo (Singapore) Pte. Ltd., declares that the wireless equipment listed in this document is in compliance with the UK Radio Equipment Regulations SI 2017 No. 1206.

The full text of the system UK declaration of conformity is available at the following Internet address: https://www.lenovo.com/us/en/compliance/uk-doc

UK Frequency band restriction for wireless LAN

Usage of this device is limited to indoor use in the WLAN band 5150 ­- 5350 Mhz.

UK RF Exposure information

This device meets the EU requirements and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) guidelines for general public’s exposure to electromagnetic fields. To comply with the RF exposure requirements, refer to the Setup Guide for your product for the minimum safe-operating separation distance and SAR values.

EU Declaration of Conformity

Hereby, Lenovo (Singapore) Pte. Ltd., declares that the wireless equipment listed in this document is in compliance with the EU Radio Equipment Directive 2014/53/EU.

The full text of the system EU Declaration of Conformity is available at the following Internet address: https://www.lenovo.com/us/en/compliance/eu-doc

EU Frequency band restriction for wireless LAN

Usage of this device is limited to indoor use in the WLAN band 5150 -­ 5350 Mhz.

EU RF Exposure information

This device meets the EU requirements and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) guidelines for general public’s exposure to electromagnetic fields. To comply with the RF exposure requirements, refer to the Setup Guide for your product for the minimum safe-operating separation distance and SAR values.

Hereby,Lenovo PC HK Limiteddeclares that the radio equipment type Lenovo TB-8506X is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://support .lenovo.com
Usage of this device is limited to indoor in the band 5150 to 5350 MHz (channels 36, 40, 44, 48, 52, 56, 60, 64).

YOUR MOBILE DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES.

Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2W/kg.Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The highest SAR values under the ICNIRP guidelines for your device model are listed below:

During use, the actual SAR values for your device are usually well below the values stated. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call. The lower the power output of the device, the lower its SAR value. If you are interested in further reducing your RF exposure then you can easily do so by limiting your usage or simply using a hands-free kit to keep the device away from the body.

YOUR MOBILE DEVICE MEETS FCC AND IC
LIMITS FOR EXPOSURE TO RADIO WAVES.

Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) adopted by the Federal Communications Commission (FCC) . These limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6W/kg.

Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The highest SAR values under the FCC and IC guidelines for your device model are listed below:

During use, the actual SAR values for your device are usually well below the values stated. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call. The lower the power output of the device, the lower its SAR value. If you are interested in further reducing your RF exposure then you can easily do so by limiting your usage or simply using a hands-free kit to keep the device away from the body.

For model: Lenovo TB-8506X

Table 1. LAN / Bluetooth

New World. New Thinking. ™
www.lenovo.com