Avanti DW1831D0WE Dishwasher Instruction Manual



Model Numbers


Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. Avanti Products LLC
P.O. Box 520604 – Miami, Florida 33152 www.avantiproducts.com

Read this guide carefully.
It is intended to help you operate and maintain your new dishwasher properly.
Keep it handy to answer your questions.
If you don’t understand something or you need more assistance, please call:
Avanti Customer Service
Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
Write down the model and serial numbers.
You’ll find them on a plate located on the rear wall of the dishwasher.
Please write these numbers here:
Date of Purchase ………….
Model Number …………..
Serial Number……………
Use these numbers in any correspondence or service calls concerning your dishwasher.
If you received a damaged dishwasher, immediately contact the dealer (or builder) that sold you the dishwasher.
Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.

We’re proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further help.
FIRST, contact the people who serviced your dishwasher. Explain why you are not pleased. In most cases, this will solve the problem.

NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:
Customer Service
Avanti Products
10880 NW 30  TheStreet
Miami, FL 33172


1 Door Lock
2 Upper Rack
3 Upper Spray Arm
4 Silverware Basket
5 Lower Rack
6 Lower Spray Arm
7 Detergent / Rinse Aid Dispenser
8 Cup Shelf
9 Heating Element

Important Safety Instructions

WARNING To reduce the risk of fire, electrical shock, or injury when
using your dishwasher, follow these basic precautions:

Read all instructions before using the dishwasher.
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned dishwashers are still dangerous. . . even if they will “just sit in the garage a few days.”
Before you throw away your old appliance: Take off the doors. Leave the shelves in  place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the dishwasher.
Never clean dishwasher parts with flammable fluids.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other dishwasher.
Plug the dishwasher into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center
-Save these instructions-
Electrical Connection

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.

  • This dishwasher should be properly grounded for your safety. The power cord of this dishwasher is equipped with a three-prong plug that mates with standard three prong wall outlets to minimize the possibility of electrical shock.
  • Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
  • Never use an extension cord to connect power to the unit.
  • Never use a two-prong grounding adapter.
  • Where a two-prong wall receptacle is encountered, contact a qualified electrician to have it replaced with a 3-prong receptacle in accordance with applicable electrical codes.
  • This dishwasher requires a standard 110/120 volts A.C.~/60hz electrical outlet with three-prong ground.
  • The cord should be secured behind the dishwasher and not left exposed or dangling to prevent accidental injury.
  • Connect to a grounded metal, permanent wiring system: or run an equipment-grounding terminal or lead of the appliance.
  • Improper connection of the equipment grounding conductor can result in a risk of electric shock.
  • Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.
  • Do not attempt to repair or replace any part of your dishwasher unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
  • To minimize the possibility of electric shock, disconnect this appliance form the power supply before attempting any maintenance. Note: Turning the dishwasher off does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.

Water Heater Safety

Under certain conditions, hydrogen may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas is explosive.
If the hot water has not been use for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allow them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process. 
Use this appliance only for its intended purpose as described in this Owner’s Manual

  • Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
  • Do not touch the heating element during or immediately after use.
  • Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic items not so marked, check the manufacturer recommendations.
  • Use only detergent and rinse additives designed for an automatic dishwasher. Using detergent that is not specifically designed for dishwashers will cause the dishwasher to fill with suds.
  • Keep children away from detergent and rinse aid, keep children away from the open door of the dishwasher, there could still be some detergent left inside.
  • The door should not be left in the open position since this could present a tripping hazard.
  • During installation, the power supply must not be excessively bent or flattened.
  • To reduce the risk of injury, do not allow children to play in or on a dishwasher.
  • Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door very carefully if the dishwasher is operating, there is a risk of water squirting out.
  • Do not place any heavy objects or stand on the door when it is open. The appliance could tip forward.
  • When loading items to be washed:
    1) Locate sharp items so that they are not likely to damage the door seal;
    2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.
  • When using your dishwasher, you should prevent plastic items from contacting with the heating elements.
  • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
  • Please dispose of packing materials properly.
  • Use the dishwasher only for its intended function.
  • Remove the door when removing an old dishwasher from service or discarding it.
  • Do not tamper with controls.
  • Do not touch the heating element during or immediately after use.

Before Using Your Dishwasher

  • Remove the exterior and interior packing.
  • Check to be sure you have all of the following parts:
    2 Wash Racks (1 Upper / 1 Lower)
    1 Silverware Basket
    1 Measuring Spoon
    1 Instruction Manual
    1 Measuring Cup
    1 Installation Manual
  • Clean the interior surface with lukewarm water using a soft cloth.


  1. Program Selector Buttons
  2. Option Indicator Lights
  3. Options Selector Button
  4. Panel Lock – Press and hold both buttons for approximately 3 seconds
  5. Delay Program Selector Button
  6. Digital Display Window
  7. Start / Cancel Button
  8. Cycle Status Indicator Lights

Once the program has been selected the appropriate indicator light will flash/blink intermittently
Pre-Programmed Wash Cycles

Program Cycle Selection Description of Cycle Running time Rinse Aid




For the heaviest soiled loads, such as pots, pans, casserole dishes and dishes that have been sitting with dried food on them for a

Pre-wash Pre-wash Wash Rinse Rinse Drying  







Normal (AHAM)


For normally soiled loads , such as pots,

plates,glasses and lightly

soiled pans. standard daily cycle.

Pre-wash Wash Rinse Rinse Drying  






For lightly soiled loads,such as

plates,glasses,bowls and lightly soiled pans.or silverware.

Wash Rinse Rinse Drying  






For lightly soiled loads, such as glasses, crystal and fine china. Pre-wash Wash

Rinse Drying







 A shorter wash for lightly soiled loads that do not need drying. Pre-wash Wash

Rinse Drying







Use for rinsing dishes, glasses and silverware that will not be washed right away.  


Pre-wash Wash



20 Mins

Wash Options:

When the Sanitize option is selected, the water temperature will be maintained at 156ºF/69ºC (maximum). The maximum temperature may not be reached if the incoming water temperature is not adequate.
Residential dishwashers are not intended for licensed food establishments or Commercial applications.

When the HI-Temp option is selected, the water temperature will be maintained at 140ºF/60ºC (maximum). The maximum temperature may not be reached if the incoming water temperature is not adequate.
Residential dishwashers are not intended for licensed food establishments or Commercial applications.

When the “Heated Dry” function is selected, the heater will work throughout the drying process.
To delay the start of a selected cycle, press the Delay Start button until the desired delay time shows in the LED display. You can delay the start time for 1 to 24 hours. To cancel the delay start option before the set delay period is over, simply press the START/CANCEL button for 3 – 5 seconds. 
Indicators are located at the right hand side of the control panel.
These lights indicate which stage of the program cycle the unit is working in.


Our Avanti dishwasher has an overfill protection device which could automatically shut off the inlet valve and start the drain pump if the water overflow. If this occurs, turn off the main water supply before calling a servicer. If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.


The dispenser must be refilled before the start of each wash cycle following the instructions provided in the “Wash Cycle Table”. Your dishwasher uses less detergent and rinse aid than conventional dishwashers. Generally, only one teaspoon of detergent is needed for a normal wash load, heavily soiled items may need more detergent. Always add the detergent just before starting the dishwasher, otherwise, it could become damp and not dissolve properly.
Amount of Detergent to Use
The amount of detergent needed can vary due to differences in the water hardness of your area. To determine the water hardness in your area, contact your local water utility or area water softening company. The harder the water, the more detergent you may need. Remember, you should adjust the amount of detergent you use by small amounts until you find the correct amount.


Removing Hard Water Spots From Dishes
To remove hard water spots, try the following:

  • Run dishes through a normal wash program.
  • Remove all metal dishware, such as cutlery, pans, etc., from the dishwasher.
  • Do not add detergent.
  • Pour two cups of vinegar into a bowl and set the bowl face up on the lower rack of the dishwasher.
  • Run the dishes through a normal wash program.

If this doesn’t work, try the same process with ¼ cup of citric acid crystals instead of vinegar.
Proper Use Of Detergent
Use only detergent specifically made for use in dishwasher. Keep your detergent fresh and dry. Don’t put powder detergent into the dispenser until you’re ready to wash dishes.

Rinse Aid Dispenser

  • Your dishwasher is designed to use liquid rinse aids. The rinse-aid dispenser is located on the door next to the detergent dispenser. Fill the rinse-aid dispenser until the level indicator turns completely black (approximately 100ml of liquid rinse-aid). Be sure not to overfill the dispenser as this will cause oversudsing. Wipe away any spills with a damp cloth. Keep in mind that if you have soft water, you may not need to use a rinse-aid as it may cause a white film to develop on your dishes.
  • To open the dispenser, turn the cap to the “Open” arrow (counter-clockwise) and lift outward
  • Pour the rinse-aid into the dispenser, being careful not to overfill.
  • Replace the cap by inserting it by aligning the arrow to the open position and turning clockwise to close it.
  • The rinse-aid is released during the final rinse to prevent water from forming droplets on your dishes that can leave spots and streaks. It also improves drying by allowing the water to “sheet” off the dishes.

Adjusting Rinse Aid Dispenser
A measured amount of rinse aid is released during the final rinse. As with detergent, the amount of rinse aid needed for your dishes depends on the hardness of the water in your area. Too much rinse aid can result in lather of foaming and cause cloudiness or streaks on your dishes. If the water in your area is very soft, you may not need rinse aid. If you do, you can dilute the rinse aid with an equal amount of water.

When To Refill The Rinse Aid Dispenser

If there is no rinse aid warning light on the control panel, you can judge the amount of rinse aid by the following means: The black dot on the rinse aid dispenser indicates the amount of rinse aid in the dispenser. As the rinse aid diminishes, the size of the black dot decreases. You should never let the rinse aid get below ¼ full.

How to Use the Upper Rack
The upper rack is designed to hold more delicate and lighter dishware as glasses, coffee and tea cup and saucers, as well as plates, small bowls shallow pans ( as long as they are not too dirty). Position the dishes and cookware so that they do not get moved by the spray of water. The upper rack can be adjusted for height by putting wheels of different height into the rails. 

How To Use The Lower Rack
We recommend that you place large items which are most difficult to clean into the lower rack: pots, pans, lids, serving dishes and bowls, as shown in the figure below.
It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the top spray arm.
Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slanted to allow water to flow out.
The bottom rack features fold-down tine rows so that larger or more pots and pans can be loaded.

Silverware Basket
Silverware should be placed in the silverware basket with handles at the bottom: if the rack has side baskets, the spoon should be loaded individually into the appropriate slots,
especially long utensils should be placed in the horizontal position at the front of the upper rack.

  1. Spoons
  2. Knives
  3. .Salad forks
  4. Forks
  5. Large spoons
  6. Large forks.

Starting A Wash Cycle

  • Make sure that the plug for the appliance is inserted into the wall socket.
    Make sure the water supply is turned on to full pressure.
  • Load the dishwasher.
    Pour in the detergent.
  • Close the door completely.
  • Select the appropriate wash cycle suitable for your needs the dishwasher will begin the selected wcycle.

Canceling Or Modifying A Wash Cycle Setting

Premise: A cycle that is underway can only be modified if it has only been running for a short time.
Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled. Press the START/CANCEL button to hold for more than 3 seconds to cancel the running program. Then you can select appropriate programs.

At The End Of The Wash Cycle
Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
Forgot To Add A Dish?
A forgotten dish can be added any time before the detergent cup opens.

  • Press the START/CANCEL button
  • Pull the door handle.
    Do not open the door until the water spray action stops. Steam may rise out of the dishwasher.
    Add forgotten dishes.
  • Push the door to close it. When the door is closed right a click will be heard.
    Press the START/CANCEL button again to continue accordingly.

Filtering System

For your convenience, we have placed the drain pump and filtering system within easy reach inside the tub.
There are three components of the filtering system: the main filter, the coarse filter and the fine filter.

  1.  Main Filter
    Food and soil particles trapped by this filter are pulverized by a special jet on the lower
    spray arm and washed down the drain.
  2. Coarse Filter
    Larger items, such as pieces of bone or glass, that could clog the drain are trapped in the coarse filter. To remove an item caught in this filer, gently squeeze the tabs on top of this filter and lift out.
  3. Fine Filter
    This filter holds soil and food residue in the sump area and prevents it from being re-deposited on the dishes during a cycle..

Caring And Maintenance
To clean the control panel use a lightly dampened cloth then dry thoroughly. To clean the exterior use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Protect against freezing
If you dishwasher is left in an unheated place during the winter, ask a service technician to:

  1.  Cut off electrical power to the dishwasher. Remove fuses or tip circuit breaker.
  2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
  3.  Drain water from the inlet pipe and water valve. (Use a pan to catch the water.)
  4. Reconnect the water inlet pipe to the water valve.
  5.  Remove the plastic sump cover in the tub the bottom and use a sponge to soak up water in rubber boot.

Cleaning The Spray Arms
It is necessary to clean the spray arms regularly or hard water chemicals will clog the spray arm jets and bearings. To remove the spray arm, screw off the nut to take out the washer on top of the spray arm and remove the arm. Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace them after rinsing them thoroughly.

Cleaning The Filters Filter assembly

Turn the Coarse filter in a counter-clockwise direction and lift it outward.

  1.  Lift out the Main filter
  2.  Lift out the Fine filter.

To replace the filter follow the same steps in reverse.
For best performance and results, the filter assembly must be cleaned.
The dishwasher must never be used without the filters. Improper replacement of the filter may reduce the performance level of the appliance and damaged dishes and utensils.

 WARNING – Never run the dishwasher without the filters in place.
Cleaning The Door
To clean the edge around the door, you should use only a soft warm, damp rag. To prevent penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will scratch the finish. Some papers towels can also scratch or leave marks on the surface.

WARNING – Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed to use the abrasive agent or some paper towel because of the risk of scratching or leaving spots on the stainless steel surface. 

How To Keep You Dishwasher In Shape
After every wash
After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside.
No solvents or abrasive cleaning products
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made specifically for dishwashers.
When you go on Holiday
When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and them remove the plug from the AC socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance. Seals
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this from occurring.
You can solve many common dishwasher problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

Dishwasher does not operate. The circuit breaker tripped or blown fuse. Power supply is not turned on.     Water pressure is low. Replace fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher Make sure the dishwasher is turned on and the door is closed securely. Make sure the power cord is properly connected. Check that the water supply is connected properly and the water is turned on.
Drain pump doesn’t stop Overflow The system is designed to detect an overflow. When it doesn’t it shuts off the circulation pump and turns on the drain pump.
Noise Some audible sounds are normal.   Utensils are not secured in the baskets or something small has dropped into the basket.   Motor hums. Sound from soft food shredding action and detergent cup opening.
Ensure everything is secured in the dishwasher.
The dishwasher has not been used regularly. If you do not use it often, remember to set it to fill and pump out every week, which will help keep the seal moist.
Suds in the tub Improper detergent.
 Spilled rinse agent.
Use only the special dishwasher detergent to avoid suds.
If this occurs, open the dishwasher and let suds evaporate.
Add 1 gallon of cold water to the tub. Close and latch the dishwasher, then drain out the water by slowly turning the dial until a drain period is reached. Repeat if necessary. Always wipe-up rinse agent spills immediately.
Stained tub interior Detergent with colorant was Make sure that the detergent is the one without
used. colorant.
Dishes are not dried Rinse agent dispenser is empty. Make sure the rinse agent dispenser Is filled.
Dishes and flatware not dean. Improper program. Improper rack loading. Select a stronger program.
Make sure that the action for the detergent dispenser and spray arms are not blocked by large dishware.
Cloudiness on glassware. Combination of soft water and too much detergent. Use less detergent if you have soft water and select a shorter cycle to wash the glassware to get them dean.
Yellow or brown film on inside surfaces. Tea or coffee stains.
Iron deposits in water can cause an overall film.
Using a solution of /z cup bleach and 3 cups warm water to remove the stains by hand.
You have to wait for 20 minutes after a cycle to let the heating elements cool down before cleaning Interior: otherwise, bums will happen.
You have to call a water softener company for a special filter.
White film on inside surface. Hard water minerals To clean the interior use a damp sponge with dishwasher detergent and wear rubber gloves. Never use any other cleaner than dishwasher detergent for the risk of foaming or suds.
Detergent left in dispenser cups. Dishes block detergent cups. Re-load the dishes properly.
Steam Normal phenomenon There is some steam coming through the vent by the door latch during drying and water draining.
Black or gray marks on dishes. Aluminum utensils have rubbed against dishes. Use a mild abrasive cleaner to eliminate those marks.
Water standing in the bottom of the tub. This Is normal. A small amount of clean water around the outlet on the tub bottom at the back of the tub keeps the water seal lubricated.
Water doesn’t pump out of the tub. Drain is dogged. Make sure the kitchen sink is draining well. If the dishwasher drains into a disposer, run It clear.
Dishwasher leaks. Overfill dispenser or rinse aid spills.
The dishwasher isn’t level.
Be careful not to overfill the rinse aid dispenser. Spilled rinse aid could cause oversudsing and lead to overflowing. Wipe away any spills with a damp cloth.
Make sure the dishwasher is level.
LIGHT and QUICK program lights flicker intermittently Water has not reached the required temperature (HOT) Malfunction of the temperature sensor and ore heating element
NORMAL and LIGHT program lights flicker Intermittently Failure of the temperature sensor The temperature sensor has failed. Contact an authorized service center
NORMAL and QUICK program lights flicker Intermittently Failure of the temperature sensor The temperature sensor has failed. Contact an authorized service center

We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti dishwashers. With the purchase of your Avanti dishwasher, you can have the confidence that if you ever need additional information or assistance, the Avanti Products Customer Service team will be here for you. Just call us toll-free.

Product Information 800-323-5029 Whatever your questions are about our products, help is available.
Part Orders 800-220-5570 You may order parts and accessories that will be delivered directly to your home, by personal

check, money order, Master Card, or Visa.

In-Home Repair Service 800-220-5570 An Avanti Products authorized service center will provide expert repair service, scheduled at a time that is convenient for you. Our trained servicers

know your dishwasher inside and out.

Wiring Diagram

YOUR AVANTI PRODUCTS WARRANTY Staple your sales receipt here. Proof of original purchase date is needed to obtain service under warranty.

Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless described in detail in the warranty document. For one year from the date of purchase by the original owner, Avanti products will, at its option, repair or replace any part of the product which proves to be defective in material or workmanship under normal use. Avanti Products will provide you with a reasonably similar product that is either new or factory refurbished. During this period Avanti Products will provide all parts and labor necessary to correct such defects free of charge, so long as the product has been installed and operated in accordance with the written instructions in this manual. In rental or commercial use, the warranty period is 90 days. All Avanti appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service center for repair.


After one year and until five years from the date of purchase, Avanti Products will furnish a replacement plastic tub, for one which is defective in material or workmanship. All labor and transportation charges are the responsibility of the consumer.
After one year and until seven years from the date of purchase, Avanti Products will furnish a replacement plastic tub, for one which is defective in material or workmanship. All labor and transportation charges are the responsibility of the consumer.

The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti Products, including without limitation, one or more of thefollowing:
·   A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes, regulations, or laws, including failure to install the product in strict conformity with local fire and building codes and regulations.
·   Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand, floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning, power surges, structural failures surrounding the appliance, and acts of God.
·Incidental or consequential damages ·  Parts and labor costs for the following will not be considered as warranty: · Door springs, and/or frames. ·Inner door panels, door shelves, door rails, and/or door supports. · Shipping and handling costs associated with the replacement of the unit.
·Repairs performed by unauthorized servicers.
· Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or any other acts of God.
· Failure of the product if it is used for other than it intended purpose. · The warranty does not applyoutside the Continental USA. ·Surcharges including but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas.

In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces and exposed parts; Products on which the serial numbers have been altered, defaced or removed; service visits for customer education, or visits where there is nothing wrong with the product; correction of installation problems (you are solely responsible for any structure and setting for the product, including all electrical, plumbing and/or other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.

Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including repairs, pro-rates, or product replacement, once this warranty has expired.
Warranty – Washing Machines

Registration Information

Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the following
address within 100 days from the date of purchase and receive these important benefits: Avanti Products LLC
P.O.Box 520604 – Miami, Florida 33152
Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us develop products designed to best meet your future needs.

————————————–(detach here)———————————————————–
Avanti Registration Card

Name……… ………….. Model # …………….Serial #
Address………………………. Date Purchased ………Store / Dealer Name
City …………State……………Zip ,………………. E-mail Address

Area Code…………Phone Number………….Occupation

Did You Purchase An Additional Warranty…………… As your Primary Residence, Do You: ………. Own  Rent
 Extended
 None
Reason for Choosing This Avanti Product:
Please indicate the most important factors
That influenced your decision to purchase th product:

  • Price
  •  Product Features
  •  Avanti Reputation
  •  Product Quality
  •  Salesperson Recommendation
  •  Other: ___________________
  •  Friend / Relative Recommendation
  •  Warranty
  • Other: ___________________

Your Age:
 under 18  18-25  26-30
 31-35  36-50  over 50
Marital Status:
 Married  Single
Is This Product Used In The:
 Home  Business
How Did You Learn About This Product:

  • Advertising
  • In-Store Demo
  •  Personal Demo