Whirlpool WCD5090JWH Compact Dryer User Guide
Whirlpool WCD5090JWH Compact DryerUser Guide
OPTIONS
- Cycle Signal, Control Lock, and Delay Start can be selected with all cycles.
Other Options
RINSE CONDENSER ONCE A MONTH
EMPTY WATER TANK BEFORE EVERY CYCLE
NOTE 1: These clothes dryer’s Government energy certifications were based on the Normal Cycle, Nonadjustable Temperature Setting and Normal Dryness Level. The as-shipped default of Wrinkle Shield off, was used.
NOTE 2: See “Program/Cycle Guide” in the Owner’s Manual for more information about cycles, settings, and options. Not all settings and options are available on each cycle. Read your Owner’s Manual before using your dryer.
CLEAN BOTTOM FILTER EVERY 5 CYCLES
Some small amount of water will be present when the filter is removed.
USE KNOB TO SELECT OPTION/ SETTING/CYCLE AND PRESS TO ADVANCE
CYCLES AND SETTINGS
- Each cycle has default time and dryness level settings. To use these settings, simply touch the Start/ Pause button to begin drying.
- To modify drying time for the Timed Dry cycles, select the Timed Dry setting.
- For all other cycles, you can modify the dryness level by selecting the Dryness Level setting.
CLEAN LINT SCREEN BEFORE EVERY CYCLE
TOUCH AND HOLD POWER TO TURN ON DRYER
TOUCH START/PAUSE TO BEGIN CYCLE
LED INDICATORS
®/™ ©2021 Whirlpool. All rights reserved. Used under license in Canada.
Was this manual helpful?
Thank you for your feedback!