Beko ATP 7100 I Air Purifier Instruction Manual

beko ATP 7100 I Air Purifier

Dear Valued Customer,
Thank you for preferring this Beko appliance. We hope that you get the best results from your appliance which has been manufactured with high quality and state-of-the­art technology, For this reason, please read this entire user manual and all other ac­companying documents carefully before using the appliance and keep it as a reference for future use. If you handover the appliance to someone else, give the user manual as well. Follow the instructions by paying attention to all the information and warnings in the user manual.
Remember that this user manual may also apply to other models. Differences between models are explicitly described in the manual.

Meanings of the Symbols
Following symbols are used in various sections of this user manual:

  • Important information and useful hints about usage.
  • WARNING: Warnings against dangerous situ­ations concerning the security of life and pro­perty.

This product has been manufactured at modern facilities respectful to the environment without harming nature.

Important Safety and Environmental

General Safety

  • Check if the voltage indicated on the appliance corresponding to the local mains voltage before you connect the appliance.
  • To avoid fire hazard, never put the cord under rugs, or near any heat source.
  • Carefully discard any plastic wrap-ping that was used for the pack-aging.
  • Do not use the air purifier outside.
  • Do not place the unit near any heat source or in direct sunlight.
  • Always unplug the air purifier be-fore removing the grill, changing the filters, cleaning the air purifier or whenever it is not in use.
  • Do not use in or around water or any other liquids. Do not attempt to wash the unit under running water.
  • Use appliance only for intended household use as described in this manual.
  • Ensure that all air openings are not restricted or covered in any way.
  • Do not place anything on top of the unit.
  • Never insert any object into any openings.
  • Do not use the air purifier if any part is missing or damaged in any way.
  • Do not attempt to repair or adjust any mechanical functions of this unit. If the unit becomes dam-aged call the service number on the back of this manual.
  • If the supply cord is damaged, it must be replaced by the manufac-turer, its service agent or similarly qualified persons in order to avoid a hazard.
  • The air purifier contains no user serviceable parts and should the product suffer damage or break-down call the service number on the back of this manual.
  • Should the air purifier stop work-ing, first check the fuse/circuit breaker at the distribution board is operating, before contacting the place of purchase.
  • This appliance is not intended for use by persons (including chil-dren) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, un-less they have been given super-vision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of ex-perience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and un-derstand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • This appliance is intended to be used in household and similar ap-plications such as:
    • Staff kitchen areas in shops, of-fices and other working environ-ments;
    • Farm houses;
    • By clients in hotels, motels and other residential type environ-ments;]
    • Bed and breakfast type environ-ments.
  • Save these instructions CAUTION: To prevent risk of electric shock, remove cord plug from outlet before activating the appliance. To prevent risk of fire, inspect and clean equipment reg-ularly as noted in this manual.
  • If the supply cord is damaged, it must be replaced by the manufac-turer, its service agent or similarly qualified persons in order to avoid a hazard.

Compliance with the WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life.
Used device must be returned to offical collection point for recy-cling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was puchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.

Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package Information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or oth-er wastes. Take them to the pack aging material collection points designated by the local authorities.

Cleaning And Maintenance

  1.  Turn the air purifier off and un-plug it before cleaning.
  2. The outside of the air purifier can be cleaned with a soft, clean damp-ened cloth.
  3. The air outlet and air inlet grill can be cleaned of dust with a small, soft brush.
  4. If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down.
  5. Wash the Pre-filter by following the operation described in the sec-tion of “VACUUM OR WASH THE PRE-FILTER”.
  6. Do not wash the HEPA filter.

Vacuum Or Wash The Pre-filter
Occasionally vacuum the exterior of the fabric pre-filter to remove dust. Always unplug the unit before re-moving the fabric pre-filter.

  1. Carefully rotate the body anti-clockwise and remove it from the air inlet grill.
  2. Remove the pre-filter from the HEPA filter.
  3. Wash the pre-filter in the wash-ing machine.
  4. After the pre-filter is cleaned well and dried, attach the pre-filter onto the HEPA filter.
  5. Carefully put the HEPA filter with pre-filter into the air inlet grill.
  6. Put the body onto the air inlet grill, then rotate the body clockwise until the fastener locks into the groove.

Know Your Air Purifier

Control Panel Introduction

Operating Instructions

 İmportant notes

  • Carefully unpack your air purifier.
  • Select a firm level place where there are no obstructions to the air inlet grill or air outlet.
  • Remove all PE bags from filters before use.
  • Do not point air outlet towards wall.

CONTROL INTRODUCTION

Power button
Touch the Power button, the machine will start running under the default “Medium” setting, and the indicator of “Medium” setting  will illuminate.

Fan speed button
There are 3 speed settings including Low, Medium and High for selection. Touch the Fan speed button to select your desired speed  setting

Dust sensor
This Air Purifier has a built-in smart dust sensor which can detect the air quality of current environment automatically, and the air quality can be shown by the air quality indicator which can illuminate in blue, pink and red when the air quality is very good, good and bad accordingly.

The timer
allows you to run your air purifier at your convenience, for up to 8 hours. With 3 settings including 2hr, 4hr and 8hr.

Ionizer rocker switch
This appliance has an independent Ionizer rocker switch equipped at the bottom of body, feature which, when turned on, releases negative ions into outgoing filtered air to help the air purification process.

To Operate Your Air Purifier

  1. Connect the appliance with power source, one “Bi” can be heard.
  2. Touch the Power button once, “Bi-Bi” can be heard, the appliance starts to run under under the default “AUTO” setting, its corresponding indicator will illuminate, and the air quality indicator will illuminate in blue, pink or red according to the actual air quality.
    • Very good air quality: The air quality indicator illuminates in blue.
    • Good air quality: The air quality indicator illuminates in pink.
    • Bad air quality: The air purifier illuminates in red.
  3. And you can select your required speed setting by following the operation described in “CONTROLS INTRODUCTION”. After select, the corresponding indicator of selected speed
    setting will turn on.
  4. After turn on the air purifier and select yourrequired speed setting, you can activate the timer by following the operation as below: Touch down Timer button on the control panel, one beep “Bi” can be heard. There are 3 settings including 2H, 4H and 8H for selection. After select your required timing, the indicator of selected timing will illuminate. When the timer expires, the air purifier will power off automatically and the indicator of selected timing will extinguish.
  5.  When the filter change indicator illuminates in white, it is time to change the HEPA filter. Please change the HEPA filter by following the operation described in the section of “CHANGE THE HEPA FILTER”.

Change The Hepa Filter

Always unplug the unit before changing the HEPA filter.

  1. When the filter change indicator illuminates in white, it’s time to change the HEPA filter.
  2. Turn off the unit and unplug it.
  3. Carefully rotate the body anticlockwise and remove it from the air inlet grill.
  4. Remove the HEPA filter out of the air inlet grill.
  5. Remove the pre-filter.
  6. Replace a new HEPA filter into the air inlet grill.
  7. Put the body onto the air inlet grill, then rotate the body clockwise until the fastener locks into the groove.

Troubleshooting

Problem
unit will not operate Check to make sure the unit is plugged in. Check to make sure the unit is on.

Check condition of the filter and replace if necessary. Check to ensure nothing is blocking the air inlet and filtered air outlet.

Be sure the plastic bag has been removed from the filter.

decreased air flow

Technical data

Technical and design modification reserved
Model No. ATP7100I
Power supply 100-240V~, 50-60Hz
Rated power 36 W
Beko A&NZ Pty Ltd 55 Blanck Street,

Ormeau QLD, 4208 AUSTRALIA

Parameter of External Power Supply
Manufacturer  

Technology Co., Ltd

DBS036A-2401500A
Input Voltage 100-240V~
Input Frequency 50-60Hz
Input Current 0.9A
Output Voltage 24.0V DC
Output Current 1.5A
Output Power 36.0W
88,24%
83,69%
0.099W

WARRANTY CONDITIONS

The following conditions apply only in relations to the warranty expressly given on this Warranty Advice Form supplied with t he product. This warranty only applies to appliances purchased and used in Australia or New Zealand and is in addition to (and does not exclude, restrict or modify in any way) other rights and remedies under a law to which the appliances relate, including any non-excludable statutory guarantees in Australia and New Zealand. It applies to the original purchaser and for appliances used in domestic applications only.

  1. This warranty does not apply:
    •  if the identification number attached to the appliance has been altered, rendered illegible or removed;
    • to light globes;
    • to paint and vitreous enamel finishes and glass;
    • to surfaces damaged by use of aerosols or cleaners;
    •  if the appliance has been
    • subject to misuse, abuse, negligence, accident, fire or floods;
    • connected or improper, inadequate or faulty electricity, gas, water or drainage services or intake or exhaust ducts or flues, or operated using incorrect or contaminated fuels or lubricants;
    • installed, maintained or operated otherwise than in accordance with the instructions furnished by Beko including the improper use of detergents, bleaches, cleaners or other additives;
    • damaged by foreign objects in the appliance;
    • serviced, repaired or altered otherwise than by Beko authorised service agents of Beko, or using other than Beko approved replacement parts.
  2. The purchaser shall be responsible for any expenses involved in making the appliances readily accessible for servicing, the purchaser shall be responsible for any costs of transporting the appliance or parts thereof to and from the nearest Beko authorised service agent.
  3. This warranty is the only expressed warranty given by Beko.
  4.  Beko reserves the right to determine whether or not the fault is caused by faulty workmanship or material or that any part is defective.
  5. Where permitted by law, this warranty shall not apply to loss suffered through or resulting from the non-operation or the ineffective operation of the appliance or any part of the appliance.
  6. The purchaser must produce proof of the date of purchase together with this Warranty Advise Form when making a claim.
  7. Subject to your statutory rights as to the merchantable quality of the product or accessory. In the event of a product or accessory being replaced during the guarantee, the guarantee on the replacement will expire at the original date, i.e., 24 months from the original purchase date.
  8. Australia: For Appliances and services provided by Beko in Australia, Beko goods come with a guarantee by Beko that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Appliance repaired or replaced if the Appliance same meaning as referred to in the Australian Consumer Law.
  9. New Zealand: For Appliances and services provided by Beko in New Zealand, the Appliances come with a guarantee by Beko pursuant to the provisions of the Consumer Guarantees Act, the Sales of Goods Act and the Fair Trading Act. Where the Appliance was purchased in New Zealand for commercial purposes the Consumer Guarantee Act does not apply.

These Warranty Conditions supersedes and excludes all other representations, conditions and warranties, except those implied by legislation previously referred to.

Beko A&NZ Pty Ltd
55 Blanck Street , Ormeau QLD, 4208 AUSTRALIA
www.beko.com.au