Miele WXD 160 WCS W1 24″ Lotus White Classic Front Load Washer User Guide
Miele WXD 160 WCS W1 24″ Lotus White Classic Front Load Washer
Before the first use
WARNING:
- Damage from incorrect installation and connection.
Installing and connecting the washing machine incorrectly will cause serious damage to property.
See “Installation”. - Damage resulting from failure to remove the shipping struts.
Failure to remove the shipping struts can result in damage to the washing machine and to adjacent cabinetry or appliances.
Remove the shipping struts as described in “Installation and connection”. - steps must be completed before the washing machine can be operated.
- Remove the shipping struts.
- Set up
- Start the calibration program.
For additional information, please refer to the separate operating instructions supplied.
Operation
The sensor buttons react to fingertip contact.
If a sensor button is illuminated, it can be selected.
If a sensor button is brightly lit, this means: currently selected
If a sensor button is dimly lit, this means: selection possible
- Control field
- Temperature sensor buttons
for selecting the temperature. - Spin Speed sensor buttons
for selecting the final spin speed. - Sensor buttons for options
You can supplement the wash programs with options. If a wash program has been selected, the sensor buttons for the available options light up dimly. - Indicator lights
Faults affecting the water inlet and drainage
Excess detergent used
Reminder about Sanitize information
The Add laundry function cannot be selected. - CapDosing sensor buttons
Fabric care (e.g., fabric softener, proofing agent)
Additives (e.g., detergent enhancers)
Detergent (for the main wash only) - Time display
After the program has started, the program runtime will appear on the display in hours and minutes. - Sensor buttons
For the Delay start function - Start/Add laundry sensor button
Touching the Start/Add laundry sensor button starts the selected program. The sensor button lights up constantly.
Once the program has been started, the Start/Add laundry sensor button allows you to add laundry. - Optical interface
This is used by the Service department as a transmission point. - Program selector
For selecting programs and for switching the machine off. The washing machine is switched on when you select a program, and switched off by turning
the program selector to the position.
Preparing the laundry
Preparing the laundry
- Empty all pockets.
Damage due to foreign objects.
Nails, coins, paper clips, and so on can cause damage to garments and components in the machine.
Check the laundry before washing and remove any such foreign objects. - Sort the laundry by color and by care label. Most garments have a textile care label in the collar or side
seam. - Pre-treat stains and badly soiled areas.
Selecting a program
Selecting the standard programs with the program selector dial
- Turn the program selector to the required program. The selected program will be shown in the display. This will then be replaced by the standard display
Selecting programs via the MobileStart program selector position and the Miele app
- To use MobileStart, the washing machine must be logged on to the WiFi network and the Remote control must be switched on.
- Turn the program selector to the
MobileStart position. appears on the time display
- Detergent dispenser drawer
- Control panel
- Drain filter
- Door
Selecting a program
Loading the washing machine
Opening the door
- Take hold of the door and pull it open.
- Unfold the laundry and load loosely into the drum.
- Make sure that no items are caught between the door and the seal.
- Shut the door gently.
Selecting program settings
- Selecting a temperature and spin speed
- The wash program’s pre-set temperature and spin speed light up brightly. The choice of temperatures and spin speeds selectable for the wash program light up dimly. Touch the sensor button for the temperature desired. It will then light up brightly. Touch the sensor button for the spin speed desired. It will then light up brightly.
Selecting options
- The selection of options available for the wash program lights up dimly. Touch the sensor button for the required option. It will then light up brightly.
Tip: You can select multiple options for a single wash program.
Add detergent
There are several options for adding detergent to the washing machine.
CapDosing
If you selected CapDosing when setting the program, the detergent will be dispensed via the capsule for this wash program.
Using powder detergent
The detergent drawer contains an insert for liquid detergent in the compartment.
This insert must be removed to use powder detergent. It is not possible to use powder detergent in the compartment
Starting a program
Filling with detergent
This washing machine requires particularly efficient detergent. Add detergent in accordance with the value in the pull-down dosage display
- Pull out the detergent drawer and add detergent to the compartment
- Chlorine bleach for removing stains or liquid detergent for the pre-wash
- Detergent for the main wash, including Soak if selected
- Fabric softener, liquid starch, or caps
Using chlorine bleach
WARNING: Damage due to chlorine bleach.
Textiles may be discolored or their fibers damaged.
Only use chlorine bleach on suitable textiles.
Chlorination must be activated in the settings before chlorine bleach is first used. The Pre-wash option must not be selected.
- Pour max. 1/4 cup (60 ml) of bleach into the chamber.
The chlorine bleach is added automatically 10 minutes before the end of the main wash.
Start the program
Touch the flashing Start/Add laundry sensor button.
The door will lock and the wash program will start.
Adding laundry during a program sequence
Laundry can be added or removed at any time, provided that the LOCK symbol is not illuminated on the control field.
- Touch the Start/Add laundry sensor button.
- Rotating bars
- If the word
- Open the door and add or remove laundry.
- Close the door.
- Touch the Start/Add laundry sensor button.
The wash program will continue
Changing a program (safety lock)
A program, temperature, spin speed, or selected options cannot be changed once the machine has been successfully started.
This prevents the machine being operated unintentionally, e.g., by children.
Canceling a program
You can cancel a wash program at any time after it has started.
- Turn the program selector to the POWER BUTTON position.
- Turn the program selector to any position.
Rotating bars
Program end
The door is locked in the Anti-crease phase.
- Turn the program selector to the POWER BUTTON position.
-0- appears on the time display and the
LOCK SYMBOL indicator light goes out. The door will be unlocked.
Tip: After the Anti-crease phase, the door will unlock automatically
- Take hold of the door and pull it open.
- Remove the laundry.
Items left in the drum could discolor other items in the next wash or become discolored themselves.
Remove all items from the drum.
- Check the folds in the door seal for any foreign objects.
- Tip: Leave the door slightly open.
If you used a capsule, remove it from the detergent drawer.
Tip: Leave the detergent drawer slightly open.
Delay Start/Options
Delay Start/SmartStart
You can delay the start of a program from 30 minutes up to a maximum of 24 hours.
This allows you to make use of night-time economy electricity rates, for example.
Selecting Delay Start
- Select the wash program required.
- Touch the
- Touch the <or > sensor button repeatedly until the required Delay Start time appears on the time display.
– In the case of settings below 10 hours, the Delay Start time changes in increments of 30 minutes.
– In the case of settings above 10 hours, the delay-start period changes in increments of 1 hour. - Touch the flashing Start/Add laundry sensor button.
The Delay Start process starts and counts ,down on the time display.
SmartStart – Setting the time period
If the P98 SmartGrid programmable function is activated, the function of the sensor button changes. The time display no
longer shows the Delay Start period; instead, it shows the time period in which your washing machine can be started automatically.
The procedure for setting this is the same as for setting the time for Delay
Start. For additional information, please refer to the separate operating instructions supplied.
Options
Options are selected and deselected using the relevant sensor buttons in the control field.
Heavy soiled
For laundry that is very heavily soiled. The extended wash duration enhances the stain-removing effect.
Lightly soiled
For slightly soiled fabrics that are not stained. The wash duration is reduced.
SoftSteam
In order to reduce creasing, the laundry undergoes a smoothing process at the end of the program. Reducing the maximum load by 50% will give a better result.
Please note the load information in the display. Small loads achieve a better result.
A buzzer sounds at the end of the program.
The buzzer sounds until the washing machine is switched off.
Program overview
| Load | F ull load (17.6 lb/8 kg) | Cotton, linen, and mixed-fiber fabrics made of both cotton and linen. | Small load (6.6 lb/3 kg) |
| Speed | Max, | Med, Slow, | |
| Temperature | Hot+, Hot, W arm +, Warm, Cold | Hot+, Hot, W arm +, Warm, Cold | |
| Program | Normal | Delicat es |
| F ull load (17.6 lb/8 kg) | Cotton or linen fabrics with direct skin contact or for which special hygiene requirements apply. | Small load (4.4 lb/2 kg) |
| Max, High, | High, Med, Slow, | |
| Sani | W arm +, Warm, Cold | |
| Sanitiz e | Handwash |
| Small load (4.4 lb/2 kg) | Pre-treat collars and cuffs depending on the level of soiling. | Small load (4.4 lb/2 kg) |
| Med, Slow, | High, Med, Slow, | |
| Hot+, Hot, W arm +, Warm, Cold | W arm +, Warm, Cold | |
| Dr ess Shirts | Darks/Denims |
| F ull load (17.6 lb/8 kg) | For white fabrics made of cotton or linen without special hygiene requirements. | Small load (5.5 lb/2.5 kg) |
| Max, High, | Med, Slow, | |
| Hot+ | W arm +, Warm, Cold | |
| Extr a White | Outdoor |
| Small load (5.5 lb/2.5 kg) | Treating microfiber fabric, ski wear, or table linens/drapes made from mainly synthetic fibers to provide a finish which is resistant to water and dirt. | Small load (5.5 lb/2.5 kg) |
| High, Med, Slow, | Max, Med, Slow, | |
| , , W arm +, , | Cold | |
| P r oofing | Dr ain/Spin |
Detergent
Detergents recommended by Miele
Cleaning and care
Cleaning the detergent drawer
Washing at low temperatures and the use of liquid detergent can lead to a build-up of bacteria in the detergent drawer.
- Clean the entire drawer at regular intervals for hygiene reasons, even if you are using the TwinDos system exclusively.
- Pull out the detergent drawer until a resistance is felt.
- Press down the release button and, at the same time, pull the drawer completely out of the machine.
Removing and cleaning the insert for liquid detergents
An insert for liquid detergents is located in the compartment of the detergent drawer.
Remove the insert.
Clean the insert thoroughly with warm water.
Compartment 1 has a siphon for better dispensing of the chlorine bleach.
Remove the release catch.
Remove the siphon from the compartment and clean under warm running water.
Remove the siphon from the compartment and clean it under warm running water.
Clean all compartments with warm water
Use a bottle brush to remove detergent residues and limescale from the jets inside the detergent- drawer housing
Tip: Leave the detergent drawer slightly open to allow it to dry.
Sanitize info (cleaning the drum)
Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant odors to build up in the washing machine. Use the Sanitize program to clean the washing machine. Clean the drum no later than the point at which the i indicator light and 1 light up on the time display
