Sony STR-KIV300 Amplifier Owner’s Manual

SONY STR-KIV300 Amplifier Owner’s

INTRODUCTION

  •  This system incorporates with Dolby* Digital and Dolby Pro Logic adaptive matrix surround decoder and the DTS** Digital Surround System.
  • Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
  • For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
  • This system incorporates High-Defi nition Multimedia Interface (HDMI™) tech-nology.
    The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
  • “BRAVIA” is a trademark of Sony Corporation.
  • “AVCHD/Progressive” and the “AVCHD/Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation.
  • “XMB”, and “xross media bar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc.
  • “PlayStation” is a registered trademark of Sony Computer Entertainment Inc.
  • Wi-Fi®, Wi-Fi Protected Access® and Wi-Fi Alliance® are registered trademarks of Wi-Fi Alliance.
  • Wi-Fi CERTIFIED™, WPA™, WPA2™, Wi-Fi Protected Setup™, Miracast™ and Wi-Fi CERTIFIED Miracast™ are trademarks of Wi-Fi Alliance.
  • The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
  • Android™ is a trademark of Google Inc.
  • Google Play™ is a trademark of Google Inc.
  • “Xperia” is a trademark of Sony Mobile Communications AB.
  • The Bluetooth® word mark and logos are registered trademarks owned by Blue-tooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.
  • MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.
  • Windows Media is either a registered trademark or trademark of Microsoft Cor-poration in the United States and/or other countries.
  • This product is protected by certain intellectual property rights of Microsoft Cor-poration. Use or distribution of such technology outside of this product is pro-hibited without a license from Microsoft or an authorized Microsoft subsidiary. Content owners use Microsoft® PlayReady™ content access technology to pro-tect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady protected content and/or WMDRM protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content own-ers may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.
  • All other trademarks are trademarks of their respective owners.
  • Other system and product names are generally trademarks or registered trade-marks of the manufacturers. ™ and ® marks are not indicated in this document.

SPECIFICATIONS

POWER OUTPUT (rated)

  • Front L/Front R:             75 W + 75 W (at 3 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference)
  • Front L/Front R/Surround L/Surround R:
  • 125 W (per channel at 3 ohms, 1 kHz)
  • Center:                          250 W (at 6 ohms, 1 kHz)

Amplifier Section

  • Subwoofer:                    250 W (at 6 ohms, 80 Hz) Inputs (Analog)
  • AUDIO IN                     Sensitivity: 1.6 V/500 mV
  • Inputs (Digital)
  • TV (Audio Return Channel/OPTICAL)
  • Supported formats: LPCM 2CH (up to 48 kHz), Dolby Digital, DTS

HDMI Section

  • Connector                      Type A (19 pin)

USB Section

  • (USB) port:               Type A (For connecting USB memory, memory card reader, digital still camera, and digital video camera)

Wireless LAN Section

  • Standards Compliance  IEEE 802.11 a/b/g/n Frequency band                     2.4 GHz, 5 GHz

Bluetooth Section

  • Communication system Bluetooth Specification version 3.0 Output         Bluetooth Specification Power Class 2 Maximum communication range
  • Line of sight approx. 10m1)
  • Frequency band             2.4 GHz
  • Modulation method        FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles2)
  • A2DP 1.2 (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile)
  • Supported Codecs3)        SBC4), AAC Transmission range (A2DP)
  • 20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz, 48 kHz)
    • The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating system, software application, etc.
    • Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.
    • Codec: Audio signal compression and conversion format
    • Subband Codec

FM Tuner Section

  • System                          PLL quartz-locked digital synthesizer Tuning range 87.5 MHz – 108.0 MHz (50 kHz step) Antenna (aerial)                     FM wire antenna (aerial)

General

  • Power requirements        220 V – 240 V AC, 50/60 Hz Power consumption On: 100 W
  • Standby: 0.3 W Dimensions (w/h/d) (approx.)
  • 249 mm × 62.5 mm × 229.5 mm incl. projecting parts
  • Mass (approx.)               1.6 kg
  • Design and specifications are subject to change without notice

SECTION 7 EXPLODED VIEWS

Note:

  • -XX and -X mean standardized parts, so they may have some difference from the original one.
  • Items marked “*” are not stocked since they are seldom required for routine ser-vice. Some delay should be anticipated when ordering these items.
  • The mechanical parts with no reference number in the exploded views are not sup-plied.
  •  Color Indication of Appearance Parts Ex-ample:
    KNOB, BALANCE (WHITE) . . . (RED)
  • The components identifi ed by mark 0 or dotted line with mark 0 are critical for safety
  • Replace only with part number specifi ed.
  • The components identifi ed by mark 9 con-tain confi dential information.
  • Strictly follow the instructions whenever the components are repaired and/or replaced.

CASE SECTION

FRONT  PANEL  SECTION

 

CHASSIS BOTTOM SECTION

CHASSIS SECTION