Beko D54223B Freestanding Refrigerator Instruction Manual

beko D54223B Freestanding Refrigerator

TOOLS REQUIRED

DIMENSIONS

The back wall of the wooden cabinet must be left open completely to kitchen wall in order to allow sufficient air circulation to cool down the condenser unit for energy efficiency.

Adjusting the legs

If your refrigerator is unbalanced:
You can balance your refrigerator by turning the legs of it as illustrated in the figure. The corner where the leg exists is lowered when you turn in the direction of black arrow and raised when you turn in the opposite direction. Taking help from someone to slightly lift the refrigerator will facilitate this process.

If the subject parts are not included in the product you have purchased, then it is valid for other models (see page 4). Note: Installation step for 2, screws for connecting top plastic part should not be screwed very hard, because of moving the plastic part easily left or right side. Installation step for 4* – only for Italy models

INSTALLATION STEPS

CAUTION:

 CAUTION