Whirlpool W11132544A Smart All-In-One Washer and Dryer User Guide
Whirlpool W11132544A Smart All-In-One Washer and Dryer
NOTE: See your Use and Care Guide for more information. Not all settings and options are available on each cycle.
warning
Fire Hazard
Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.
NOTE: Display will enter sleep mode after 2 minutes.
BEFORE FIRST USE
Your machine comes equipped with Load & Go™ bulk dispensers, which allow you to fill detergent and fabric softener once and skip refills for multiple loads. Add liquid HE detergent to Dispenser 1 and liquid fabric softener or liquid HE detergent to Dispenser 2. Use HE detergent only.
IMPORTANT: Do not use chlorine bleach in this washer. Also, if using a detergent in both dispensers or using a detergent concentration other than 2x, see your Use and Care Guide for initial setup.
RUN WASH CYCLE WITHOUT LAUNDRY
Before washing clothes for the first time, choose the Regular/Quick cycle and run it without clothes. This initial cycle serves to ensure the interior is clean before washing clothes and the bulk dispensers are ready for use.
DOING LAUNDRY
Also, add desired laundry products. If using powdered HE detergent or single-dose laundry packets, go to Tools to disable the
LOAD LAUNDRY
For optimal drying and cycle time, load the drum no more than half full.
IMPORTANT: Push load fully into the washer/dryer. Make sure no items are resting on the rubber door below seal to avoid trapping them between the seal and the door glass.
SELECT WASH PROGRAM/CYCLE (if desired)
From the home screen, touch the “What to Wash” area of the screen to select the program that best matches the items you want to wash. Touch the “How to Wash” area of the screen to select the program that best matches the method that you would like for washing those items.
SELECT TEMPERATURE AND SPIN SPEED (if desired)
For optimal drying and cycle time, load the drum no more than half full and do not open the door during the drying cycle.
NOTE: Because the dryer is ventless, you should expect to see longer dry times than you may have had with previous vented dryers.
SELECT OPTIONS (if desired)
Options include:
Soil Level, Extra Rinses, Pre-Soak, TumbleFresh™ for the washing phase and Wrinkle Shield™ for the drying phase.
TOUCH START/PAUSE BUTTON TO BEGIN CYCLE
If you selected wash and dry, the washer/dryer will notify you when washing is complete and drying is about to begin. Remove any items that you do not want to dry.
REMOVE GARMENTS PROMPTLY AFTER CYCLE IS FINISHED
MAINTENANCE
- Run Clean Washer cycle every 30 loads. The washer will also give you a reminder.
- Leave door open for ventilation when machine is not in use.
- Check rubber door bellow seal between cycles. Clean out small items and/or debris if present.
- Clean drain pump filter every 6 months. Unlike a conventional dryer, you do not need to clean out lint after every cycle.
CONNECT TO WI-FI
Download the Whirlpool app and follow
the instructions to connect your washer/dryer to your Home Wi-Fi network. You can also visit www.whirlpool.com/connect.