Intel LAPKC51E NUC X15 Laptop Kit User Guide

intel LAPKC51E NUC X15 Laptop Kit User

Preparing your Computer

Connect the power cord to the AC adapter then to a grounded 100-240VAC outlet.

Connect the AC adapter’s DC output plug to the DC IN jack on the back of the system.

The display panel can be opened to a wide range of angles for optimal viewing. Attempting to force the lid open beyond 180 degrees will cause damage to the hinges and/or the display.

Press the power button to turn on your laptop computer.

Product Overview

  • Digital Microphones. Dual built-in microphones
  • Camera High Definition Camera
  • LCD Screen Internal display/panel
  • Mode Button Selects operating mode when the laptop is powered on: Battery Saver – Both Indicators are off Balanced – Left indicator is on Performance – Both indicators are on.
  • Power Button and Power LED
    Press once to turn the laptop on when it is powered off or asleep. Indicator will turn on. Press once to notify the operating system to power off the laptop or enter sleep mode. Indicator will turn off if powered off. Power On: White. Power Off: Off. Suspend: Blinking White
  • Charging and Battery LED. Charging (Power ON): Blinking White. Charging (Power OFF): Blinking White. Battery Low (<6%): Amber. Charging Finish (with AC): White. Charging Finish (without AC): Off
  • Keyboard
    Membrane keyboard with backlight support.
  • Touchpad Enable/Disable Switch with Indicator. Double tap to enable or disable the touchpad.. Indicator will turn on when the touchpad is disabled.
  • Touchpad/Clickpad. Touch-sensitive pointing device which functions like a mouse
  • Caps Lock Status Indicator. Caps Lock ON: Indicator On. Caps Lock OFF: Indicator Off

Right Side

  • 2 in 1 Card Reader Support for SD/SDHC/SDXC memory cards
  • USB 3.2 Gen2 Port Connect any USB device into this port, such as a USB flash drive, keyboard, or mouse.
  • Vents The thermal vents are designed to cool the internal components and avoid overheating

Left Side

  • Kensington Lock Anti-theft key lock hole
  • Vents The thermal vents are designed to cool the internal components and avoid overheating
  • USB 3.2 Gen2 Port Connect any USB device into this port, such as a USB flash drive, keyboard, or mouse.
  • Headset Jack Connect amplified speakers or headphones into this jack

Bottom Side

  • Speakers Stereo audio output
  • Back Cover Screws Modification of any of the laptop’s components will void the warranty
  • Vents The thermal vents are designed to cool the internal components and avoid overheating

Front Side

RGB Light Bar Used to support Alexa personal voice assistant

Back Side

  • Vents The thermal vents are designed to cool the internal components and avoid overheating
  • Thunderbolt™ 4 Port Connect any USB Type C or Thunderbolt™ device into this port, such as a USB Flash drive or an external storage device. This port will also support displays using a Type-C to DisplayPort cable.
  • HDMI Port Supports high-definition digital video connections
  • Network Jack (RJ-45) This jack lets you connect to a Local Area Network (LAN)
  • Power Connector Connect the AC adapter into this connector
  • Vents The thermal vents are designed to cool the internal components and avoid overheating

Understanding the Keyboard

The following defines the row of function keys which also contain a secondary hotkeys/shortcuts which can be accessed by pressing and holding down the Function Key (FN) while simultaneously pressing the desired hotkey/shortcut.

Keyboard Shortcuts

To activate these functions, press the hotkey associated with the desired function as indicated below:

Using the Touchpad/Clickpad

The touchpad / clickpad is a rectangular electronic panel located just below your keyboard. Clicking twice within the 15mm x 15mm corner in the top left will enable or disable (lighted indicator) touchpad functionality. You can use the static-sensitive panel of the touchpad / clickpad and slide it to move the cursor. Press the left and right bottom corners located on the bottom edge of the touchpad / clickpad to make selections and run functions. These two buttons are similar to the left and right buttons on a mouse. Tapping on the touchpad / clickpad produces similar results.