Yamaha PX10 Power Amplifier Owner’s Manual

YAMAHA PX10 Power Amplifier

Thank you for your purchase of the Yamaha PX10, PX8, PX5, or PX3 power amplifier. Please read through this manual carefully before using it For the first time, in order to take full advantage of your PX power amplifier’s superlative features and enjoy trouble-free operation for years to come.

After you have read the manual, keep it in a safe, convenient place for reference when needed.

  • Please read the PRECAUTIONS on the reverse side of this manual before use.
  • The illustrations as shown in this manual are for instructional purposes only.
  • The company names and product names used in this manual are the trademarks or registered trademarks of their respective companies.
  • In this manual, the PX10, PX8, PX5, and PX3 power amplifier models are referred to collectively as “PXamplifier.”
  • Unless specified otherwise, the example illustrations used in this manual are taken from the PX10.
  • The PX amplifier provides two setting methods: Basic mode and Advanced mode. This manual explains operations in the Basic mode. Operate in the Advanced mode for detailed settings. For information on the Advanced mode, refer to the PX10/PX8/ PX5/PX3 Reference Manual.

The PX10/PX8/ PX5/PX3 Reference Manual is an electronic file in PDF format. You can read this book on a computer. Use Adobe® Reader® to read this book on screen, search for words very quickly, print specific pages, or click links to display sections of special interest. The ability to search for words, or to follow links directly to relevant sections in the document, are helpful attributes of this electronic file format. We encourage you to take advantage of these benefits. You can download the latest Adobe Reader application from the website listed below. http://www.adobe.com/

Features

  • Maximum output of 1,000W out of lightweight chassis (PX10)
  • Yamaha’s proprietary Class-D and processing technologies provide superb sound quality and high reliability
  • Speaker presets that allow you to get the best possible performance from Yamaha speakers
  • A wide variety of DSP functions, including D-CONTOUR processing
  • CONFIG WIZARD that provides the optimal configuration for any speaker
  • A broad range of input/output connectors.

Included accessories

  • AC power cord
  • Owner’s Manual (this leaflet)
  • Technical Specifications (English)
  • AC plug clamp
  • USB cap

CAUTION: Please keep the USB cap out of reach of children, to keep them from accidentally swallowing it.

Setup

The PX amplifier can be used as a normal amplifier by simply setting the volume knobs properly. The following settings enhance the performance of speakers.

Pre-installation

  • Mount PX amplifiers in a rack as required. Make sure that the power is turned off, and turn both the two volume knobs all the way to the left.

In this manual, methods of operations are explained with the following marks

  • [(item name)]: Rotate the main knob to select [(item name)].
  • : Press the Main knob.
  • : Press the [MENU] key.
  • : Press the [ ] (back) key.
  • : Operate A, and then operate B.

A solid arrow ( ) between steps indicates a basic operation procedure, and a dotted arrow ( ) indicates an operation returning to the previous screen.

Stereo connection (using two full-range speakers)

CAUTION: Please carry out “Pre-installation” surely. Do not connect any cables while the power is on.

  1. Connect the full-range speaker for the L channel to the [SPEAKERS] A terminal and the full-range speaker for the R channel to the [SPEAKERS] B terminal.
  2. Connect the output from sources (such as a mixer) to the [INPUT] A/B connectors. Connect the L channel source to the [INPUT] A connector, and the R channel source to the [INPUT] B connector.
  3. Connect the AC power cord and turn it on. First, connect the power cord to the connector on the unit, and then plug it into an appropriate AC power outlet.
  4. Secure the AC power cord with the AC plug clamp to prevent accidental disconnection from the connector. Refer to the “Rear panel” section on the reverse side for instructions on installation.

NOTE: Refer to the “Wiring” section on the reverse side for instructions on making connections.

Cross-over connection (using a full-range speaker and a subwoofer)

CAUTION: Please carry out “Pre-installation” surely. Do not connect any cables while the power is on.

  1. Connect the full-range speaker for the L channel to the [SPEAKERS] A terminal and the full-range speaker for the R channel to the [SPEAKERS] B terminal.
  2. Connect the output from sources (such as a mixer) to the [INPUT] A/B connectors. Connect the L channel source to the [INPUT] A connector, and the R channel source to the [INPUT] B connector.
  3. Connect the AC power cord and turn it on. First, connect the power cord to the connector on the unit, and then plug it into an appropriate AC power outlet.
  4. Secure the AC power cord with the AC plug clamp to prevent accidental disconnection from the connector. Refer to the “Rear panel” section on the reverse side for instructions on installation.

NOTE: Refer to the “Wiring” section on the reverse side for instructions on making connections.

Tone Control

MODE Selection screen

Select one of the following three modes.

  • OFF: Turns off D-CONTOUR.
  • FOH/MAIN: Boosts the high and low-frequency components that the frequency response is suitable for main speaker use.
  • MONITOR: Reduces the low-frequency range, which could otherwise tend to be boomy if the speaker is set directly on the floor. This enables you to hear mid and high-frequency ranges clearly when using it as a floor monitor.

NOTE

  • To mute channel A, push the [A] key and the main knob simultaneously.
  • To cancel muting, push the [A] key and the main knob simultaneously again.
  • To mute channel B, push the [B] key and the main knob simultaneously.
  • To cancel muting, push the [B] key and the main knob simultaneously again.

Controls and Functions

Front panel

Power button

  • Turns the power to the unit on or off.

[POWER] indicator

  • Turns on when the power is on.

[ALERT] indicator

  • Lights when a problem in the device is detected.
  • Lights until the cause of the problem is solved.

NOTE: Details of the problem are shown on the display (8). Selecting the icon i on the HOME screen with the main knob calls up the operating log.

[USB] indicator

  • Lights when a compatible USB memory device is inserted into the [USB] terminal.
  • Flashes when the USB device is being accessed.

NOTICE: Do not unplug the USB device while the [USB] indicator is flashing. Data in the USB memory may be corrupted or lost.

[CLIP/LIMIT] indicators

  • Lights when the limiter is operating to protect the amplifier and the speaker, or the input signal overflows in the digital circuit or clips at the amplifier output.

[SIGNAL] indicators

  • Lights when the output is larger than -60 dB of maximum output level (8 ohms).

[PROTECT] indicators

  • Lights when the protection circuit is operating.

Display

  • Displays the condition of the PX amplifier and setting menus.

[MENU] key

  • Press the key to move to the top MENU screen.

[ ] (Back) key

  • Press this key to move up to the immediately higher menu level or previous display. Press and briefly hol the key to return the HOME screen.

Main knob

  • Rotate the knob to change the values of parameters and move the position of the cursor. Press the knob to actually enter the set value or enable the selected item.

[A]/[B] keys

  • Press the key to switch the channel (A or B) for operating the corresponding parameters.

NOTE: Press the main knob and [A] key to change the mute status of channel A. Press the main knob and [B] key to change the mute status of channel B.

[USB] terminal

  • Insert a USB memory device to read/load the data from/to the PX amplifier.

NOTICE: When the terminal is not used, attach the supplied USB cap to protect the terminal.

Volume knob

  • Adjust the level from -∞ dB to 0 dB.

Intake ports

  • Air intakes for the cooling fan. Make sure to not block the air intakes.

NOTE

  • The settings can be changed so that the display and indicators turn off automatically when panel is not operated (Black-out mode). Refer to PX10/PX8/PX5/ PX3 Reference Manual for instructions on the Blackout mode.
  • For the protection of the display, even if the Black-out mode is not active, the display automatically turns off if the PX amplifier has not been operated for 20 minutes. To turn on the display again, simply press any key on the front panel or rotate the main knob.

Rear panel

[INPUT] A/B connectors

The following two types of input connectors are provided for both channels A and B.

  • XLR input jack
  • Phones input jack
NOTE: Each XLR input jack and phone input jack are connected in parallel. Only one of the jacks can be used as an input jack at one time; the signals from the jacks cannot be mixed.
[SPEAKERS] A/B terminals
Output terminals to speakers. The following three types are available:
  • Neutrik NL4MD SpeakON output connector
  • Binding post output connector
  • Phones output jack

CAUTION: Do not touch the terminals or metal parts of cords connected to the terminal.

NOTICE

  • If connecting speakers to multiple connectors of the same channel results in a parallel connection, make sure that the total impedance of the speakers to be connected is not excessively low.
  • The PX amplifier adopts BTL (Balanced Transformer Less) amplifier circuits. Connecting both terminals of channels A and B and contact between\ the terminal and the chassis may cause a failure or malfunction. Be careful to not connect or contact the two by mistake.
Wiring

Binding post connector

No plugs

Remove about 15 mm of insulation from the end of each speaker cable, pass the bare wire through the holes in the appropriate speaker terminals, and tighten the terminals to securely clamp the wires. Make sure that the bare wire ends do not jut out from the terminals and touch the chassis.

Y-plugs

  • From above, insert the Y-plugs all the way into the opening, and tighten the terminals.

Speak ON connector

  • Insert the speaker cable plug (Neutrik NL4) into the connector, and turn it to the right to lock it.

Channel A

Neutrik

NL4

 PX amplifier
1+ A+
1– A–
2+ B+
2– B–

Channel B

Neutrik

NL4

 PX amplifier
1+ B+
1– B–
2+ (not connected)
2– (not connected)

AC IN connector

Connect the supplied AC power cord. First connect the AC power cord to the connector on the amplifier, and then plug it into an appropriate AC power outlet.Secure the AC power cord with the AC plug clamp to prevent accidental disconnection from the connector.

Installing the AC plug clamp

Exhaust ports

  • Exhaust vents for the cooling fan.
  • Make sure to not block the exhaust vents.

Troubleshooting

The Yamaha Pro Audio website provides a FAQ (a list of frequently asked questions, with answers). http://www.yamahaproaudio.com/

Symptom Possible causes Possible Solution
 

[PROTECT] indicator lights and an “OUTPUT CUR- RENT OVER” message appears on the display.

 There is a short at the speaker terminal, amplifier terminal, or wire, and the circuit is protected. Turn off and check for a short at the speaker terminal or amplifier, wire, etc., and turn it on again.
Since the impedance of the connected speaker is too low and the amplifier is overloaded, circuit protection is engaged. Check that the speaker has not been damaged and that total impedance is not excessively low, and review the speaker connection.
[PROTECT] indicator lights and an “AMP TEMP TOO HIGH” message appears on the display.  

Because the internal temperature is too high, thermal protection is engaged to protect the circuit.

 Check the amplifier ventilation conditions and take appropriate measures to improve the airflow around the amplifier. Leave the amplifier off until the internal temperature goes down, and then turn it on again.
 

[CLIP/LIMIT] indicator lights.

 Because the input signal is excessive or the output exceeds the rated voltage, the signal is clipped or the limiter is engaged to protect the circuit. Lower the output level of the device connected to the input connector, or lower the volume of the amplifier.
 

 

 

The power does not turn on.

 The power supply voltage of the connected outlet is significantly different from the rated range. Check the source voltage.
 

Because the internal temperature is too high, thermal protection is engaged to protect the circuit.

 Check the amplifier ventilation conditions and take appropriate measures to improve the airflow around the amplifier. Leave the amplifier off until the internal temperature goes down, and then turn on again.
The sound from the speakers is distorted. The input level exceeds the setting of the input sensitivity. Adjust the input sensitivity to match the input level.
The sound is muffled. No high-frequency sound. The sound is filtered. The filter condition can be checked on the HOME screen. Change the setting of the filters in the MENU screen (TUNING screen).
 

 

 

 

 

No sound from speakers.

  

The cables are not connected appropriately.

 Connect input connectors and output connectors properly. Refer to the “Setup” section on the front side for connection instructions.
The level has declined with the volume. Adjust the volume.
The mute is on. When the mute is on, “MUTE” appears on the HOME screen. Turn off the mute.
The protection circuit is engaged and the output is muted. When the protection circuit is engaged, the [PROTECTION] indicator lights. Identify what is causing the protection circuit to engage and solve it.
The panel controls cannot be operated.  

The panel lock is turned on.

 Turn off the panel lock. Refer to PX10/PX8/ PX5/PX3 Reference Manual for instructions on turning off the panel lock.

Main Specifications

PX10 PX8 PX5 PX3
Output Power 120 V 60 Hz, 220 V-240 V 50 Hz/60 Hz
1 kHz, non-clip,

20 msec burst,

both channels driven

 8Ω 1000 W × 2 800 W × 2 500 W × 2 300 W × 2
4Ω 1200 W × 2 1050 W × 2 800 W × 2 500 W × 2
2Ω 700 W × 2 600 W × 2 500 W × 2 300 W × 2
1 kHz, non-clip,

20 msec burst

 8Ω/Power Boost mode — — 800 W × 1 600 W × 1
4Ω/Power Boost mode — — 1400 W × 1 1000 W × 1
Output Power 100 V 50 Hz/60 Hz
1 kHz, non-clip,

20 msec burst,

both channels driven

 8Ω 1000 W × 2 800 W × 2 500 W × 2 300 W × 2
4Ω 1200 W × 2 1050 W × 2 800 W × 2 500 W × 2
2Ω 700 W × 2 600 W × 2 500 W × 2 300 W × 2
1 kHz, non-clip, 8Ω/Power Boost mode — — 800 W × 1 600 W × 1
20 msec burst          4Ω/Power Boost mode — — 1200 W × 1 1000 W × 1
Amplifier Type (Output Circuitry) Class D, balanced output circuit (BTL)
THD+N 1 kHz, 10 W 0.1%
1 kHz, half power 0.3%
Frequency Response 1 W, 8Ω, 20 Hz to 20 kHz ±1.0 dB
Crosstalk                  Half power, 8Ω, 1 kHz, vol. max., input 150Ω shunt <= -60 dB
S/N Ratio                 A-weighted, 8Ω, gain setting = +14 dBu 101 dB 101 dB 100 dB 100 dB
Maximum Input Voltage +24 dBu
Input Impedance 20 kΩ (Balanced), 10 kΩ (Unbalanced)
 

AC Power Requirement

 Depending on area of purchase; 100 V 50 Hz/60 Hz, 120 V 60Hz,

220 V-240 V 50 Hz/60 Hz *1

Power 1/8 MAX power, 4Ω, pink noise at all channels 310 W 280 W 230 W 160 W
Consumption             Idle, 4Ω 60 W 60 W 55 W 55 W
Operating Temperature 0°C to +40°C
Storage Temperature -20°C to +60°C
Dimensions (W × H × D) 480 × 88 × 388 mm

(18.90 × 3.46 × 15.28 inch)

Net Weight 7.4 kg (16.31 lbs) 7.2 kg (15.87 lbs) 6.9 kg (15.21 lbs) 6.9 kg (15.21 lbs)
  • Device operation has been confirmed within +/- 10% of the rated power supply voltage.
  • The contents of this manual apply to the latest specifications as of the printing date. To obtain the latest manual, access the Yamaha website then download the manual file.

This mark indicates a dangerous electrically live terminal. When connecting an external wire to this terminal, it is necessary either to have “a person who has received appropriate guidance on handling” make the connection or to use leads or a cord that have been manufactured in such a way that the connection can be made simply and without a problem.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING.

Please keep this manual in a safe place for future reference.

WARNING: Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Power supply/power cord

  • Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.
  • Only use the voltage specified as correct for the device. The required voltage is printed on the nameplate of the device.
  • Use only the supplied power cord/plug.
  • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.
  • When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, as long as the power cord is not unplugged from the wall AC outlet, the device will not be disconnected from the power source.
  • Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms.
  • Be sure to connect to an appropriate outlet with a protective grounding connection.

Do not open

This device contains no user-serviceable parts. Do not open the device or attempt to disassemble the internal parts or modify them in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel.

Water warning

  • Do not expose the device to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings.
  • If any liquid such as water seeps into the device, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Yamaha service personnel.
  • Never insert or remove an electric plug with wet hands.

Hearing loss

  • Do not use speakers for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.
  • When turning on the AC power in your audio system, always turn on the device LAST, to avoid hearing loss and speaker damage. When turning the power off, the device should be turned off FIRST for the same reason.

Fire warning

  • Do not place any burning items or open flames near the device, since they may cause a fire.

If you notice any abnormality

  • If any of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet.
    • The power cord or plug becomes frayed or damaged.
    • Unusual smells or smoke are emitted.
    • Some object has been dropped into the device.
    • There is a sudden loss of sound during the use of the device.
    • Cracks or other visible damage appear on the device.
  • Then have the device inspected or repaired by qualified Yamaha service personnel.
  • If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel.

CAUTION: Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others or damage to the device or other property. These precautions include, but are not limited to, the following:

Power supply/power cord

  • When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.

Location

  • Do not place the device in an unstable position where it might accidentally fall over and cause injuries.
  • Do not block the vents. This device has ventilation holes at the front/rear to prevent the internal temperature from becoming too high.
  • In particular, do not place the device on its side or upside down. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire.

When installing the device

  • Do not cover it with any cloth.
  • Do not install it on a carpet or rug.
  • Make sure the top surface faces up; do not install on its sides or upside down.
  • Do not use the device in a confined, poorly-ventilated location.
  • Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire.
  • Make sure that there is adequate space around the device: at least 40 cm above, 10 cm at the sides, and 10 cm behind.
  • Do not place the device in a location where it may come into contact with corrosive gases or salt air. Doing so may result in malfunction.
  • Keep the device out of reach of children, to keep them from putting their fingers into openings on the equipment and accidentally being injured.
  • Before moving the device, remove all connected cables.
  • If the device is mounted in an EIA standard rack, carefully read the section “Rack Mounting” in the PX10/PX8/PX5/ PX3 Reference Manual. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), malfunction, or even fire.

Connections

  • Before connecting the device to other devices, turn off the power for all devices. Also, before turning the power of all devices on or off, make sure that all volume levels are set to the minimum.
  • Failing to do so may result in electric shock, hearing loss, or equipment damage.
  • Use only speaker cables for connecting speakers to the speaker jacks. Use of other types of cables may result in fire.

Maintenance

  • Remove the power plug from the AC outlet when cleaning the device.

Handling caution

  • Do not insert your fingers or hands in any gaps or openings on the device (vents).
  • Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or openings on the device (vents). If this happens, immediately turn off the power unplug the power cord from the AC outlet, and have the device inspected by qualified Yamaha service personnel.
  • Do not rest your weight on the device or place heavy objects on it, and avoid using excessive force on the buttons, switches, or connectors to prevent injuries.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed.

NOTICE: To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.

Handling and maintenance

  • Do not use the device in the vicinity of a TV, radio, AV equipment, mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise
  • Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components.
  • Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel.
  • The amplifier uses forced-air cooling fans that draw air from the front and exhaust it through the rear. Please be sure that you do not block the air intakes or exhaust vents.
  • When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
  • Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved from one location to another, or air conditioning is turned on or off, for example.
  • Using the device while condensation is present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several hours without turning on the power until the condensation has completely dried out.
  • Do not use this device for any purpose other than driving loudspeakers.
  • Always turn the power off when the device is not in use.
  • Rapidly turning the unit on and off in succession can cause it to malfunction. After turning the unit off, wait for more than five seconds before turning it on again.

Connectors

  • XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
  • Use only Neutrik NL4FC plugs for connecting Speakon connectors.

Information

About functions/data bundled with the device

  • The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.

About this manual

  • The illustrations and LCD screens as shown in this manual are for instructional purposes only.
  • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
  • Software may be revised and updated without prior notice.
  • The Yamaha Pro Audio website provides a FAQ (a list of frequently asked questions, with answers). http://www.yamahaproaudio.com/

European models: Purchaser/User Information specified in EN55103-2:2009. Conforms to Environments: E1, E2, E3 and E4

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT. The wires in this mains lead are colored in accordance with the following code:

  • GREEN-AND-YELLOW: EARTH
  • BLUE: NEUTRAL
  • BROWN: LIVE

As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings identifying the terminals in your plug proceed as follows: The wire which is colored GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or colored GREEN or GREEN-and-YELLOW. The wire which is colored BLUE must be connected to the terminal which is marked with the letter N or colored BLACK. The wire which is colored BROWN must be connected to the terminal which is marked with the letter L or colored RED.

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery, and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about the collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]

  • If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

  • This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

ADDRESS LIST

NORTH AMERICA

CANADA

  • Yamaha Canada Music Ltd.
  • 135 Milner Avenue, Toronto, Ontario,
  • M1S 3R1, Canada
  • Tel: +1-416-298-1311

The U.S.A.

  • Yamaha Corporation of America
  • 6600 Orangethorpe Avenue, Buena Park,
  • CA 90620, U.S.A.
  • Tel: +1-714-522-9011

EUROPE

THE UNITED KINGDOM/ IRELAND

  • Yamaha Music Europe GmbH (UK)
  • Sherbourne Drive, Tilbrook, Milton Keynes,
  • MK7 8BL, U.K.
  • Tel: +44-1908-366700

GERMANY

  • Yamaha Music Europe GmbH
  • Siemensstrasse 22-34, 25462 Rellingen, Germany
  • Tel: +49-4101-303-0

ITALY

  • Yamaha Music Europe GmbH, Branch Italy
  • Viale Italia 88, 20020, Lainate (Milano), Italy
  • Tel: +39-02-93577-1

OTHER EUROPEAN COUNTRIES

  • Yamaha Music Europe GmbH
  • Siemensstrasse 22-34, 25462 Rellingen, Germany
  • Tel: +49-4101-3030

AFRICA

  • Yamaha Music Gulf FZE
  • JAFZA-16, Office 512, P.O.Box 17328, Jebel Ali FZE, Dubai, UAE
  • Tel: +971-4-801-1500

OTHER COUNTRIES

  • Yamaha Music Gulf FZE
  • JAFZA-16, Office 512, P.O.Box 17328, Jebel Ali FZE, Dubai, UAE
  • Tel: +971-4-801-1500

ASIA

THE PEOPLE’S REPUBLIC OF CHINA

  • Yamaha Music & Electronics (China) Co., Ltd.
  • 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China
  • Tel: +86-400-051-7700

INDIA

  • Yamaha Music India Private Limited
  • Spazedge Building, Ground Floor, Tower A, Sector-47, Gurgaon- Sohna Road, Gurgaon-122002, Haryana, India
  • Tel: +91-124-485-3300

SINGAPORE

  • Yamaha Music (Asia) Private Limited
  • Block 202 Hougang Street 21, #02-00, Singapore 530202, Singapore
  • Tel: +65-6740-9200

TAIWAN

  • Yamaha Music & Electronics Taiwan Co., Ltd.
  • 2F., No.1, Yuandong Rd. Banqiao Dist.
  • New Taipei City 22063, Taiwan, R.O.C.
  • Tel: +886-2-7741-8888

THAILAND

  • Siam Music Yamaha Co., Ltd.
  • 3, 4, 15, 16th Fl., Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand
  • Tel: +66-2215-2622

HEAD OFFICE

  • Yamaha Corporation, Audio Products Sales and Marketing Division
  • ADDRESS: 10-1, Nakazawa-Cho, Naka-Ku, Hamamatsu, Japan 430-8650

Yamaha Pro Audio global website: http://www.yamahaproaudio.com/
Yamaha Downloads: http://download.yamaha.com/

Manual Development Group
© 2016 Yamaha Corporation
Published 04/2016 POHD-B0 Printed in China