Acer G195HQL LCD Monitor User Guide

acer G195HQL LCD MonitorImportant safety instructions

Please read the following instructions carefully.

  1. To clean the LCD monitor screen:
    • Turn off the LCD monitor and unplug the power cord.
    • Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
  2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
  3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
  4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
  5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
  6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
    • Monitor-to-PC signal cable is frayed or damaged.
    • Liquid spills onto the LCD monitor or the monitor is exposed to rain.
    • The LCD monitor or case is damaged.
  7. Acer monitor is purposed for video and visual display of information obtained from electronic devices.

Attaching the monitor to the base

  1. Remove the monitor from the packaging.
  2. Attach the footstand to the base. (for selected models).
  3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
  4. Secure the base to the stand by turning the screw using the integrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

  1. Turn off your computer and unplug your computer’s power cord.
  2. Connect the signal cable to the HDMI (optional) and/or DP(optional) input socket of the monitor, and the HDMI (optional) and/or DP(optional) output socket of the graphics card on the computer.
  3. Insert the monitor power cable into the power port at the back of the monitor.
  4. Plug the power cords of your computer and your monitor into a nearby electrical outlet.

Note: Audio output is only for the audio output model. Please check the user manual for more instructions.
AdaptiveSync (HDMI/DP):
It can allow an AdaptiveSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power-efficient, virtually stutter-free and low-latency display update.
G-Sync Compatible/AdaptiveSync:
DP port could support G-Sync Compatible/AdaptiveSync, HDMI could support HDMI-VRR (for Xbox One VRR).

External controls

1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode.
2 Function key   / a.        Press to view Main page. Press again to enter hotkey1 function.

b.        When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults.

3 Function key

/

 a.        Press to view Main page.Press again to enter hotkey2 function.

b.        When the Function Menu is active, press this button to select select scenario mode or game mode .

4 Function key

/ X

 a.        Press to view Main page.Press again to enter Input select function.

b.        When the Function Menu is active, this button will quit the OSD.

5 Function key

/

 a.        Press to view Main page.Press again to enter next function in the Function Menu.

b.        The single toggle button on the backside of the Display bezel operates like a joystick. To move the cursor, simply toggle the button in four directions. Press the button to select desired option.

Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices.

Regulations and safety notices

FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the device and receiver.
  • Connect the device into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
Disposal of waste equipment by user in a private household in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

SPECIFICATION

 

 

 

 

 

LCD Panel

 Driving system TFT Color LCD
Size 27″W (69cm)
Pixel pitch 0.311mm(H) x 0.311mm(V)
Brightness 400nits
Contrast 100,000,000:1Max. (ACM)
Viewable angle 178° (H) 178° (V) (CR≥10) (Typical)
Response time 1ms (G to G) 0.5 ms (G to G, Min.)
Panel Type In-Plane Switching
H-Frequency HDMI(2.0):30~255KHz, DP(1.2):255~255KHz
V-Frequency HDMI(2.0):48~240Hz, DP(1.2):48~280Hz
Display Colors 16.7M Colors
Dot Clock 600MHz
Max. Resolution Normal mode: 1920× Overclocking mode: DP: 1920×1080 @280Hz
Plug & Play VESA DDCCI/DDC2B
 

Power consumption

 ON Mode 25W
Standby Mode 0.5W
Off Mode 0.3W
Input Connector HDMI (Only HDMI Model) DP(Only DP Model)
Input Video Signal HDMI signal (Only HDMI-Input Model)(Optional) DP signal (Only DP Model)
Speakers 2W x 2
 

Audio

 Audio-Input (Only Audio-Input Model)
Audio-Output (Only Audio-Output Model)
Maximum Screen Size Horizontal:598mm Vertical:336mm
Power Source 100-240V~, 50/60Hz
Environmental Considerations Operating Temp: 0° to 40°C Storage Temp: -20° to 60°C Operating Humidity: 20% to 80%
Dimensions 614(W) x 415~530(H) x 236(D)mm
Weight (N. W.) 6.14kg Unit (net)
 

 

Mechanism spec

 Tilt: -5° to +20°

Swivel: +/- 20°

Height adjustment: 115mm Pivot: Yes

Detachable foot stand: Yes

 

 

 

 

 

 

 

 

 

External Controls:

  

 

 

 

 

 

 

 

 

 

Functions

 Brightness                                          VRB

Contrast                                              Aim Point

Black Boost                                       Language

Blue Light                                           OSD Timeout

ACM                                                   Transparency

HDR                                                    Refresh Rate Num

Super Sharpness                               OSD Lock

Max brightness                                  Input

Gamma                                               Auto Source

Color Temp.                                        Wide Mode

Modes                                                Hot Key Assignment

sRGB Mode                                        DDC/CI

Grayscale Mode                                 HDMI Black Level

6-axis Hue                                          Quick Start Mode

6-axis Saturate                                   Over Clock

Volume                                               Reset

Mute

Over Drive AdaptiveSync

*Specifications may vary depending on model, sku and/or region.

Find manuals and other documents for your Acer product on the official Acer support website.