Samsung SMT-225 Galaxy Tab A7 Lite Tablet User Guide

SAMSUNG SMT-225 Galaxy Tab A7 Lite Tablet

Package contents

• Device
• USB power adopter
• USB cable
• Ejection pin
• Quick start guide

The items supplied with the device and their images may vary by region.

To turn on the device, press and hold the Side key for a few seconds.

NOTE
The charger should remain close to the electric socket and easily accessible while charging.

Accessing more information

visit www.samsung.com to view device information the user manual and more

NOTE
you may incur additional charges for accessing the internet

If your device is frozen and unresponsive, press and hold the Side key and the Volume Down key simultaneously for more than 7 seconds to restart it.

It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods. Doing so may result in afterimages (screen burn-in) or ghosting.

To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods.

Depending on the region, you can view the regulatory information on the device. To view the information, launch the Settings app.

FCC Notice

The device may cause TV or radio interference ifused in close proximity to receiving equipment. The FCC can require you to stop using the mobile device if such interference cannot eliminated.

Information about the RF exposure from FCC

n August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adoptedFCC 96-326, adopted an updated safety standard for human an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both international and U.S. standards. The design of this phone complies with FCC guidelines and these international standards.
Body effects
For body operation, this device has been tested and meets FCC RF exposure guidelines when used with any accessory that contains no metal and which provides a minimum separation distance of 15mm between this device and the body of the user. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

Class B Compliance under article 15 of the FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received including interference that may cause undesired operation.

Caution
The user is cautioned that changes or modifications expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Some content may differ from your device depending on the region, service provider, or software version, and issubject to change without prior notice

Correct disposal

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste.
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste.

PO BOX 12987, DUBLIN, IE

Safety information

Read all safety information before using the device to ensure safe and proper use. You can view more safety information in the safety information menu of the Settings app.

Warning

Your device contains magnets, which may affect medical devices, such as pacemakers or implantable cardioverter
defibrillators. If you are using any of these medical devices, keep your device a safe distance from them and consult with your physician before you use the device
Follow the warnings below to prevent incidents, such as fires or explosions, injuries, or damage to the device

• Do not expose the device to physical impact or damage.
• Use only Samsung-approved batteries, chargers, and cables specifically designed for your device.
• Prevent the multipurpose jack and battery terminals from coming into contact with foreign materials such as metal, liquids, or dust.
• If any part of the device, such as the glass or acrylic body, is broken, smokes, or emits a burning odor, stop using the device immediately. Use the device again only after it has been repaired at a Samsung Service Centre.
• Do not turn on or use the device when the battery compartment is exposed.
• Do not disassemble or reuse the battery.
• Do not allow children or animals to chew or suck the device.
• The device can be used in locations with an ambient temperature of 0 °C to 35 °C. You can store the device at an ambient temperature of -20 °C to 50 °C. Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the battery’s lifespan.
• Do not use your device in a hot environment or near fire.
• Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle.

Specific Absorption Rate (SAR) certification information

Your device conforms to U.S. Federal Communications Commission (FCC) standards that limit human exposure to radio frequency (RF) energy emitted by radio and telecommunications equipment. These standards prevent the sale of mobile devices that exceed a maximum exposure level (known as the Specific Absorption Rate, or SAR) of 1.6 W/kg.
In normal use, the actual SAR is likely to be much lower, as the device has been designed to emit only the RF energy necessary to transmit a signal to the nearest base station. By automatically emitting lower levels when possible, your device reduces your overall exposure to RF energy.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guidelines. Some devices are required to receive approval from the FCC. If your device required FCC approval, you can view the FCC certification by opening Settings About phone
Status.
SAR information for this and other devices can be found on the FCC website at: www.fcc.gov/oet/ea/.
Follow the instructions on the website to use the FCC ID to find SAR values for the device.
SAR information for this device can also be found on Samsung’s
website: www.samsung.com/sar.