LG 32TNF5J Digital Monitor Signage Owner’s Manual

LG 32TNF5J Digital Monitor Signage

WARNING – This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

BASIC

NOTE

  • The accessories provided with your product may vary depending on the model or region.
  • Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
  • SuperSign Software & Manual

Checking the Accessories

CHECKING BEFORE INSTALLATION

We are not responsible for product damage caused by failure to follow the guide.

Using Vertically
When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing t t of the screen.

Tilt Angle

When installing the monitor, it may be tilted upward at an angle of up to 45 degrees.

Installation Location

We are not responsible for product damage caused by failure to follow the guide. This product is used as a built-in product installed inside the enclosure.

  • The product warranty will be void if it is used with the front panel exposed to direct sunlight.
  • Wear work gloves when installing the product.
  • Installing the product with bare hands may cause injury.
Indoor

Installing the monitor in the enclosure
If installing the product inside the enclosure, install the stand (optional) on the rear side of the product. When installing the product using the stand (optional), attach the stand securely to the monitor to ensure it does not fall.

Model VESA Dimensions (A x B) (mm) Standard Dimensions Length (Maximum) (mm) Quantity
32TNF5J 200 x 200 M6 21.0 4
43TNF5J 200 x 200 M6 15.5 4
55TNF5J 300 x 300 M6 14.0 4

Side Mount Hole

Model Standard Dimensions Length (Maximum) (mm) Quantity etc.  

ENGLISH

32TNF5J M4 4.5 12 Top/Left/Right (4EA each)
43TNF5J M4 4.5 12 Top/Left/Right (4EA each)
55TNF5J M4 4.0 12 Top/Left/Right (4EA each)
  1. Use the side screw holes when mounting the panel.
  2. Screw tightening torque: 5~7 kgf
  3. The screw length can be longer, depending on the enclosure shape and thickness of the material.

CAUTION

  • Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.
  • If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
  • Damage to the monitor by tightening the screws too tightly may void your warranty.
  • Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse of inappropriate components is not covered by the warranty of this product.
  • When installing the product, be careful not to apply strong force to the lower part.

NOTE

  • Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
  • For more information on installation, please refer to the user manual for the wall mount.

PRECAUTIONS FOR USE

The Wake-up feature for sleep mode is not supported in this model.

Dust
The warranty will not cover any damage caused by using the product in an excessively dusty environment.

Afterimage

  • After-image appears when the product is turned off.
    • Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screen- saver function.
    • Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause  an afterimage. This is normal due to the display characteristics of this product.
  • When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called an afterimage.
  • Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed for a long time. The following are operational recommendations for reducing the occurrence of afterimages when using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better for preventing afterimages.
  • Recommended Usage Condition
  1. Change the background colour and text colour at equal intervals.
    • Afterimages occur less when the colours to be changed are complementary to one another.
  2. Switch the screen at equal time intervals.
    • Take caution, and ensure that text or images from before the screen change are not left in the same location after  the screen change.

PRODUCT SPECIFICATIONS

Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.

32TNF5J

Input/Output Ports  

 

Embedded battery Applied
Resolution Recommended Resolution 1920 x 1080 @ 60 Hz (HDMI1, HDMI2)
Max Resolution
Power Voltage 100-240 V ~ 50/60 Hz 0.6 A
 

 

Environmental Conditions

Operating Temperature

Operating Humidity

0 °C to 40 °C

10 % to 80 % (Condition for preventing condensation)

Storage Temperature Storage Humidity -20 °C to 60°C

5 % to 85 % (Condition for preventing condensation)

* Product box packaging storage conditions

Power Consumption On Mode 55 W (Typ.)
Sleep Mode / Standby Mode ≤ 0.5 W

43TNF5J

Input/Output Ports  

 

Embedded battery Applied
Resolution Recommended Resolution 3840 x 2160 @ 60 Hz (HDMI1, HDMI2)
Max Resolution
Power Voltage 100-240 V ~ 50/60 Hz 1.1 A
 

 

Environmental Conditions

Operating Temperature

Operating Humidity

0 °C to 40 °C

10 % to 80 % (Condition for preventing condensation)

Storage Temperature Storage Humidity -20 °C to 60°C

5 % to 85 % (Condition for preventing condensation)

* Product box packaging storage conditions

Power Consumption On Mode 95 W (Typ.)
Sleep Mode / Standby Mode ≤ 0.5 W

55TNF5J

Input/Output Ports  

 

 

 

Embedded battery Applied
Resolution Recommended Resolution 3840 x 2160 @ 60 Hz (HDMI1, HDMI2)
Max Resolution
Power Voltage 100-240 V ~ 50/60 Hz 1.7 A
 

 

Environmental Conditions

Operating Temperature

Operating Humidity

0 °C to 40 °C

10 % to 80 % (Condition for preventing condensation)

Storage Temperature Storage Humidity -20 °C to 60°C

5 % to 85 % (Condition for preventing condensation)

* Product box packaging storage conditions

Power Consumption On Mode 127 W (Typ.)
Sleep Mode / Standby Mode ≤ 0.5 W

32/43/55TNF5J

* Touch Screen
OS (Operating System) Windows 10 10 Points (Max)
webOS 10 Points (Max)
Model Name Dimensions (Width x Height x Depth) (mm) Weight (kg)
32TNF5J 723 x 419.4 x 39.1 5.6
43TNF5J 967.2 x 559 x 38 10.4
55TNF5J 1231.8 x 709.6 x 39.2 16.8

HDMI (PC) Support Mode

Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Note
800 x 600 37.879 60.317  
1024 x 768 48.363 60  
1280 x 720 44.772 59.855  
1280 x 1024 63.981 60.02  
1680 x 1050 65.29 59.954  
1920 x 1080 67.5 60  
 

3840 x 2160

67.5 30  

Except for 32TNF5J

135 60

* We recommend using 60Hz. (Motion blur/judder may be visible on inputs other than 60Hz.)

LICENCE

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Vision IQ, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Temporary noise is normal when powering ON or OFF this device.