Schneider Electric CCT90501 Load Compensation Module LED Instructions
Product End of Life Instructions
Load Compensation Module LED
End of Life Instructions
Recommendation | Number on drawing | Component / Material | Weight (in g) | Comment |
To be dismantled | 1 | Plastic parts | 5 | |
To be depolluted | 2 | Electronic Board (Power) > 10cm² | 6.09 |
Product description
Manufacturer identification | Schneider Electric Industries SAS |
Brand name | Schneider Electric |
Product function | The Load Compensation Module LED is used to improve the dimming behavior of LED loads/lamps in combination with dimmers in trailing edge mode. |
Product reference | CCT90501 |
Total representative product mass | 11 g |
Representative product dimensions | 12mm x 43mmx 29mm |
Date of information release | 03/2021 |
Additional information
Legal information | This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The product family must be disposed of according to the legislation of the country. This document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic information to assure an appropriate end-of-life treatment for the components and materials of the product. | |
Recyclability potential | 68% | Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1, 20 Sep. 2008 presented to the French Agency for Environment and Energy Management: ADEME). |
Schneider Electric Industries SAS
Country Customer Care Center
http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
F- 92506 Rueil Malmaison Cedex
RCS Nanterre 954 503 439
Capital social 896 313 776 €
www.schneider-electric.com
ENVEOLI2102017_V1
Published by Schneider Electric
© 2019 – Schneider Electric – All rights reserved
Was this manual helpful?
Thank you for your feedback!