LIEBHERR GP2733001 21 Freezer User Guide

LIEBHERR GP2733001 21 Freezer

Appliance at a glance

Description of appliance and equipmenT

Shelves, drawers and baskets are arranged for optimum energy efficiency on delivery.

1. Transport grips at bac
2. Operating and control (5) elements
3. Drawers
4. Type plate
5. VarioSpace
6.  Height-adjustable feet, transport castors at back

Appliance range of use Intended use

The appliance is only suitable for cooling food products in a domestic or household-like environment. This includes, for example, use:

• in staff kitchens, bed and breakfast establishments, by guests in country houses, hotels, motels, and other accommodation, – for catering and similar services in the whole-
• sale trade. The appliance is not suitable as a built-in unit. All other types of use are not permitted. Foreseeable misuse The following applications are expressly forbidden:
  • Storing and refrigerating medicines, blood plasma, laboratory preparations or similar substances and products based on the Medical Device Directive 2007/47/EC
  • Use in areas at risk of explosions
  • Misusing the appliance may lead to damage to the goods stored or they may spoil.

Climate classifications
Depending on the climate classification the appliance is designed to operate in restricted ambient temperatures. The climate classification applying to your appliance is printed on the rating plate.

Note Keep to the specified ambient temperatures in order to guarantee that the appliance works properly.
The appliance will work properly down to a lower ambient temperature of -15 °C.

Conformity

The refrigerant circuit has been tested for leaks. This appliance complies with the applicable safety stipulations and with direc-tives 2014/35/EU, 2014/30/EU, 2009/125/EG, 2011/65/EU and 2010/30/EU.

EPREL database

Details about energy labelling and ecodesign requirements will be available on the European product database (EPREL) from 1st March 2021. You can access the product database at the following link: https://eprel.ec.europa. eu/ You will be asked to enter the model ID. You can find the model ID on the name-plate.

External dimensions of the appli ance

For appliances supplied with wall spacers, the measurement increases by 35 mm (see 4.2 Installing the appliance) .

Saving energy

• Pay attention to good ventilation. Do not cover ventilation holes or grids.
• Do not install the appliance in direct sunlight, next to an oven, radiator or similar.
• Energy consumption depends on the installation conditions, e. g. the ambient temperature (see 1.2 Appliance range of use) . A warmer ambient temperature can increase the energy consumption.
• Open the appliance for as short a time as possible.
• The lower the temperature is set the higher the energy consumption.
• Keep all food properly packed and covered. This prevents frost from forming.
• Inserting warm food: allow to cool down to room temperature first.
• If there is a thick layer of frost in the appliance: defrost the appliance.
• Dust deposits increase energy consump-tion:
• For refrigerators with heat exchangers dust the metal grid on the back of the appliance once a year.

General safety information

Danger for the user

• This device can be used by children and people with impaired physical, sensory or mental abilities or with a lack of experi-ence and knowledge provided that they are supervised or have received instruction in the safe use of this device, and about the resulting hazards. Children must not play with this appliance. Cleaning and user main-tenance work must not be carried out by chil-dren without adult supervision. Children aged between 3 and 8 are allowed to load and unload the appliance. Children below the age of 3 must be kept away from the appliance unless they are under continuous adult super-vision.
• When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.
• In the event of a fault pull out the mains plug or deactivate the fuse.
• Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable.
• Repairs, interventions on the appliance and the replacement of mains connection line may only be carried out by After-Sales Service or other suitably trained specialist personnel. – Only assemble, connect and dispose of the appliance according to the instructions.
• Please keep these instructions in a safe place and pass them on to any subsequent owners.

Fire hazard

• The coolant used (information on the model plate) is eco-friendly but also flammable. Any leaking coolant may ignite.
• Do not damage the refrigerant circuit pipes.
• Do not handle ignition sources inside the
• Do not use electrical appliances inside the appliance (e.g. steam cleaners, heaters, ice cream makers, etc.).
• If the refrigerant leaks: remove any naked flames or ignition sources from the vicinity of the leakage point. Properly air the room. Inform customer services.
• Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components.
• Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appliance on fire.
• other packaging containing alcohol in tightly closed containers. Any alcohol that leaks out may be ignited by electrical components.
• Danger of tipping and falling:
• Do not misuse the plinth, drawers, doors etc.- Hot steam can lead to injury. Do not use elec-trical heating or steam cleaning equipment, open flames or defrosting sprays to defrost. – Do not use sharp implements to remove the ice.
• Danger of crushing:
• Do not hold the hinge when opening and closing the door. Fingers may get caught.
• The symbol can be located on the compressor. It refers to the oil in the compressor and indicates the following danger: Swallowing or inhaling can be fatal. This is only relevant for recycling. There is no danger in normal operation.
• This symbol is found on the compressor and indicates the danger of flammable materials. Do not remove the sticker.
• A sticker to this effect may be applied to the rear of the appliance. It refers to the foam-padded panels in the door and/or the housing. This is only relevant for recycling. Do not remove the sticker.

Controls and displays

Operating and control elements

1.  On/Off button
2.  SuperFrost button
3.  Brightness symbol
4.  SuperFrost symbol
5.  Temperature display
6.  Setting button
7. Alarm button
8.  Child lock symbol
9.  Menu symbol
10.  Alarm symbol

Temperature display

During normal operation, the display shows:

• the freezer temperature setting
• The temperature display flashes if/when:
• You change the temperature setting
• The appliance is not cold enough after switching on
• The temperature rises by several degrees.

The following displays indicate a fault. Possible causes and solutions: (see 7 Malfunctions) .

• The SuperFrost symbol Fig. 3 (4) flashes together with the temperature display.

Putting into operation

Transporting the appliance

• Transport the appliance only in suitable packaging.
• Transport the appliance upright.
• Do not transport the appliance on your own.

Installing the appliance

Fire hazard due to dampness! If live parts or the mains lead become damp this may cause short circuits.

The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.

Risk of fire due to short circuit!
If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/connector may be damaged by the appliance vibrations, leading to a short circuit.

• Stand the appliance so that it is not touched by connectors or main cables.
• Do not plug the appliance or any others into sockets located near the rear of the appliance.

Putting into operation

• Before you connect the appliance, report any damage imme-diately to the delivery company.
• The floor of the installation site must be horizontal and even.
• Do not install the appliance in direct sunlight, next to an oven, radiator or similar.
• The best place for installation is a dry and well ventilated room.
•  Install the appliance with the rear panel up against the wall and always use the supplied wall spacers (see below).
• Only ever move the appliance when it is empty.
• The surface supporting the appliance must be at the same level as the surrounding floor.
• Do not install the appliance on your own.
• The more coolant there is in the appliance, the larger the room in which the appliance is installed must be. If the room is too small, any leak may create a flammable mixture of gas and air. For each 8 g of coolant the installation space must be at least 1 m3. Information on the coolant is on the model plate inside the appliance.
• Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because other-wise there will be vibratory noise!
• Remove all transit supports. The spacers supplied with some appliances must be used to achieve the stated energy consumption. These will extend the depth of the appliance by approx. 35 mm. The appliance is fully functional if the spacers are not used, but does have a slightly higher energy consumption.
• In the case of an appliance with enclosed wall spacers, mount the wall spacers on the back of the appliance at the top left and right.
• Dispose of packaging material (see 4.5 Disposing of pack-aging) .
• Align the appliance so that it stands firmly and on a level by applying the accom-panying spanner to the adjust-able-height feet (A) and using a spirit level.
• If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance.
• Always see to good ventilation at the installation site.
  

Note
If you have several appliances next to one another, leave a gap of 100mm between appliances. Otherwise condensation will build up between the units. Clean the appliance (see 6.2 Cleaning the appliance) .

Changing over the door hinges

You can change over the door hinges if necessary. Ensure that the following tools are to hand:

1. Torx 25
2. Torx 15
3. Open-ended spanner size 10
4.  Screwdriver
5. Open-ended spanner included in supply package
6. Second person for fitting work, if needed

CAUTION

Risk of injury if the door tips!

• Take good hold of the door.
• Set down the door carefully.

1. Unscrew the securing screw on the bottom right Fig. 5 (1) turn hinge.
2. Open the door.
3. Hold the door on the handle side and at the bottom and lift it.
4. The bearing pin Fig. 5 (21) should come out of the turn hinge Fig. 6 (2) .
5. If the bearing bolt Fig. 5 (21) doesn’t undo press it out from underneath.
6. Swing door out at the bottom and remove it.
7.  Unscrew the turn hinge Fig. 6 (2) .
8. Unscrew the bearing element, Fig. 6 (3) transfer it to the opposite location hole of the turn hinge and screw it firmly into place.
9. Take the stopper Fig. 6 (4) out of the turn hinge and transfer it to the receiving hole on the opposite side of the turn hinge.
10. Carefully lift off the cover Fig. 6 (5) on the handle side.
11. Undo the screw Fig. 6 (6) and transfer it to the opposite side.
12.  Put the cover Fig. 6 (5) back on.
13. Screw the turn hinge Fig. 6 (2) firmly into place on the new hinge side (with 4 Nm), possibly using a power screwdriver.
14. At the top, use a screwdriver to unclip cover Fig. 7 (7) and cover Fig. 7 (8) at the front, and remove by pulling out and down.
15. Unscrew the bearing pin Fig. 7 (9) and screw it firmly into place on the opposite side (with 4 Nm).
16. Refit the cover Fig. 7 (7) on the side of the bearing pin: insert at the back, snap in at the front.
17.  Fit the cover Fig. 7 (8) on the opposite side: insert at the back, snap in at the front.
18. Lift the stopper Fig. 8 (12) out of the door bearing bush and transfer it.
19. Detach door handle, stoppers Fig. 8 (10) and pressure plates Fig. 8 (11) and transfer to the opposite side.
20. When mounting the pressure plates, make sure they snap into place properly.
21. Transfer the spring clamp Fig. 9 (20) : Depress the latch nose and pull the spring clamp off over it.
22. Slide the spring clamp into place on the new hinge side until it clicks into place.
23. Pull the bearing pin Fig. 9 (21) out of the door bush and transfer it to the opposite side together with the washer. The latch nose must point to the inner side of the door, the notch to the outer side.
24. Hang the door on the bearing pin Fig. 7 (9) at the top.
25. Swing the door in at the bottom and insert the bearing pin Fig. 9 (21) into the turn hinge. If necessary, turn the bearing pin until it snaps into place.
26. Insert the securing screw Fig. 5 (1) at the bottom into the bearing pin and tighten it (with 4 Nm).
27. If necessary, align the door flush with the appliance housing using the two slots in the turn hinge. To do so, unscrew the middle screw.
    Risk of injury due to the door dropping out! If the bearing parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly.
28. Screw on the bearing brackets/bearing pins tightly (4 Nm).
29. Check all of the screws and retighten if necessary.

Insertion into a row of kitchen units

1.  Stack cabinet
2.  Appliance
3.  Kitchen cabinet
4. Wall

x For appliances supplied with wall spacers, the measurement increases by 35 mm (see 4.2 Installing the appliance) . The appliance can be built into kitchen units. A top cupboard Fig. 10 (2) can be added above the appliance in order to bring the appliance Fig. 10 (1) up to the height of the fitted kitchen units. When installing with kitchen units (max. depth 580 mm), the appliance can be positioned directly next to the kitchen cabinet Fig. 10 (3) . The appliance will project by 34 mm x at the sides and 50 mm x in the centre of the appliance in relation to the kitchen cabinet front.

NOTICE
Danger of overheating due to insufficient air ventilation! The compressor may be damaged if there is insufficient air ventilation.

• Take care to ensure adequate air ventilation.
• Observe the ventilation requirements.

Ventilation requirements

• At the back of the stack cabinet there has to be a ventilation duct of at least 50 mm depth throughout the width of the stack cabinet.
• The cross section of the ventilation gap below the ceiling must be at least 300 cm2 .
• the larger the ventilation space, the more energy-saving the appliance is in operation.

If the appliance is installed with the hinges next to a wall Fig. 10 (4) , the distance between appliance and wall has to be at least 40 mm. This corresponds to the projection of the handle when the door is open.

Disposing of packaging

The packaging is made of recyclable materials:

• corrugated board/cardboard
• expanded polystyrene parts
•  polythene bags and sheets
•  polypropylene straps
• nailed wooden frame with polyethylene panel*

Take the packaging material to an official collecting point.

Connecting the appliance

NOTICE
Failure to connect properly Damage to the electronics.

• Do not use a standalone inverter.
• Do not use an energy saving plug.
• Do not use an extension cable.
• Do not use distributor blocks.

The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see 1 Appliance at a glance) . The socket must be properly earthed and fused. The tripping current for the fuse must be between 10 A and 16 A. The socket must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. It must be outside the area of the rear of the appliance.

•  Check the electrical connection.
• Plug in the power plug.

Switching on the appliance

• Press the On/Off button Fig. 3 (1) .
• The appliance is switched on. The temperature display and Alarm symbol Fig. 3 (10) flash until the temperature is cold enough.
• If “DEMO” is displayed, demo mode is activated. Please contact the after sales service.

Control

Brightness of the temperature display

You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed.

Adjusting the brightness

The background lighting can either be turned off or set to one of 5 levels. The factory setting is that the background lighting is turned off.

• To activate the setting mode: Press the SuperFrost button Fig. 3 (2) for about 5 seconds.
• The menu symbol Fig. 3 (9) shines and the child lock symbol Fig. 3 (8) flashes.
• Press the setting button Fig. 3 (6) to select the brightness function.
• The child lock symbol Fig. 3 (8) turns off and the brightness symbol Fig. 3 (3) flashes.
• The child lock symbol Fig. 3 (8) turns off and the brightness symbol Fig. 3 (3) flashes.
• To confirm: Briefly press the SuperFrost button Fig. 3 (2) .
• The brightness symbol Fig. 3 (3) shines.
• Using the setting button Fig. 3 (6) , select either “off” or the brightness wanted. The more display fields of the tempera-ture display that light up, the brighter it is. If no field is lit up, it means “off”.
• To confirm: Press the SuperFrost button Fig. 3 (2) .
• -Wait for 5 minutes.
• The brightness symbol Fig. 3 (3) flashes.
• The brightness is adjusted to the new value.
• The brightness symbol Fig. 3 (3) and the menu symbol Fig. 3 (9) go out.
• The temperature is indicated again in the temperature display.

Child proofing

The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children.

To activate child lock

• To activate the setting mode: Press the SuperFrost button Fig. 3 (2) for about 5 seconds.
  • The menu symbol Fig. 3 (9) shines and the child lock symbol Fig. 3 (8) flashes.
• Briefly press the SuperFrost button Fig. 3 (2) to select the child lock function.
  • The child lock symbol Fig. 3 (8) shines. The -15 °C and -21 °C LEDs shine in the temperaturedisplay.
• Briefly press the SuperFrost button Fig. 3 (2) to activate the child lock.
  •  The child lock symbol Fig. 3 (8) flashes. The -15 °C and -21 °C LEDs go out.
• To deactivate the setting mode: Press the On/Off button Fig. 3 (1) .Wait for 5 minutes
• The menu symbol Fig. 3 (9) goes out and the temperature is displayed again in the temperature display. The child lock symbol Fig. 3 (8) shines.

To deactivate child lock

• To activate the setting mode: Press the SuperFrost butto Fig. 3 (2) for about 5 seconds.
• The menu symbol Fig. 3 (9) shines and the child lock symbol Fig. 3 (8) flashes.
• Briefly press the SuperFrost button Fig. 3 (2) to select the child lock function.
• The child lock symbol Fig. 3 (8) shines. The -18 °C LED shines in the temperature display.
• Briefly press the SuperFrost button Fig. 3 (2) to deactivate the child lock.
• The child lock symbol Fig. 3 (8) flashes.
• To deactivate the setting mode: Press the On/Off button Fig. 3 (1) . Wait for 5 minutes.
• The menu symbol Fig. 3 (9) goes out and the temperature is displayed again in the temperature display. The child lock symbol Fig. 3 (8) no longer shines

Temperature alarm

The audible alarm sounds if the freezer temperature is not cold enough.
The temperature display and the alarm symbol Fig. 3 (10) flash at the same time.
The cause of the temperature being too high may be:

•  warm fresh food was placed inside
• too much warm ambient air flowed in when rearranging and removing food
• Prolonged power outage
• the appliance is faulty
  The audible alarm is automatically silenced, the alarm symbol Fig. 3 (10) goes out and the temperature display stops flashing when the temperature is sufficiently cold again. If the alarm status persists: (see 7 Malfunctions

Muting the temperature alarm

The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again.

• Press alarm button Fig. 3 (7) .
•  The audible alarm is silenced.

Freezing food

The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see 1 Appliance at a glance) under “Freezing capacity … kg/24h”. Each drawer can hold a max. of 25 kg of frozen food.  The shelves can each be loaded with 35 kg of frozen food. If the door cannot be opened right after having been closed, due to vacuum, please wait about 2 minutes until pressure returns to normal

CAUTION
Risk of injury due to broken glass! Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks. Do not freeze bottles and cans containing drinks!   So that the food is rapidly frozen through to the core, do not exceed the following quantities per pack – Fruit, vegetables up to 1 kg – Meat up to 2.5 kg u Pack the food in portions in freezer bags, reusable plastic, metal or aluminium containers

Storage life

Thawing food

• in a microwave oven
•  in a conventional or fan oven
•  at room temperature
• Remove only as much food as is required. Use thawed food as quickly as possible.
• Food once thawed should be re-frozen only in exceptional cases.

Setting the temperature

Temperature setting to be recommended: -18 °C The temperature can be changed continuously. Once the -32 °C setting is reached, it starts again with -15 °C. u To access temperature adjustment: press setting button Fig. 3 (6) once. w The LED of the current temperature flashes in the temperature display. u Press the setting button Fig. 3 (6) the number of times needed until the required temperature shines in the LED display. Long pressing of the setting button sets a slightly colder value within a small temperature range (e.g.: between -15 °C and -18 °C). The LED of the next lower temperature range then shines in the temperature display.

SuperFrost

With this function you can freeze fresh food quickly through to the core. The appliance operates with maximum refrigeration. The noise of the refrigeration unit may be temporarily louder as a result.In addition, frozen food already in storage is given a “cold reserve”. The food stays frozen longer as a result when you defrost the appliance. You can freeze as many kilograms of fresh food within 24 hrsas is indicated on the type plate under “Freezing capacity … kg/24hrs”. This maximum freezing quantity can vary depending on model and climate class. You have to activate SuperFrost in good time, depending onhow much fresh food is to be frozen: about 6 hours before placing the food inside in case of small amounts and about 24 hours in advance in case of the maximum amount of food to be frozen.Wrap produce and spread it out as far as possible. Do not allow produce to be frozen to touch produce that is already frozen to prevent the latter thawing. You do not have to activate SuperFrost in the following cases: – when placing frozen food in the freezer – when freezing up to approx. 2 kg fresh food daily

Freezing with SuperFrost

• Briefly press the SuperFrost button Fig. 3 (2) .
• The SuperFrost symbol Fig. 3 (4) shines.
• The freezer temperature drops, the appliance operates with the maximum refrigerating capacity
• wait approx. 6 h.
• Place wrapped produce in the bottom drawers. In case of the maximum amount of food to be frozen (see type plate):
• wait about 24 h.
• Remove bottom drawer and place produce directly in the appliance so that it touches the base or sides.
• SuperFrost is automatically deactivated after about 65 h.
• TheSuperFrost button Fig. 3 (4) extinguishes once freezing is completed.
• The temperature range set for the normal mode shines in the temperature display.
• Place produce in the drawer and then push the drawer back in again.
• The appliance continues to operate in the energy-saving, normal mode. To save energy SuperFrost can switch switched off, even before the full 65 hours of freezing time has elapsed, by pressing the SuperFrost button Fig. 3 (2) again. Only switch off SuperFrost once the temperature is -18 °C or colder

Drawers

• To store frozen food directly on the shelves pull the drawer forward and lift it out

Shelves

Moving shelves

• To remove the shelf: lift up at the front and pull out.
• To put the shelf back: simply push in as far as it will go.

VarioSpace

You can remove the shelves and drawers. This leaves more room for larger food items such as poultry, meat, large game and tall baked goods, which can be frozen whole before further preparation.

• Each drawer can hold max. 25 kg of frozen food.
• The shelves can each be loaded with 35 kg of frozen food

Maintenance

Manual defrosting

After a long period of operation, a layer of frost or ice can build up inside the appliance. The layer of frost or ice builds up faster if the appliance is opened often or if the food is warm when placed inside. However, a thick layer of ice will increase the appliance‘s energy consumption. You should therefore defrost the appliance regularly Remove ice from inside surface at top of appliance: A layer of ice forms inside at the centre of the top of the device. This ice forms as a result of physical properties. u Regularly remove the ice with a scraper tool. The appliance does not need to be be thawed for that reason.

Thawing process

• Never use mechanical aids or other means that have not been recommended by the manufacturer, to speed up the defrosting process.
• Do not use electrical heating or steam-cleaning appliances, naked flames or defroster sprays to defrost.
• Do not use sharp objects to remove ice.
• Do not damage the pipework in the cooling circuit.
• Switch on SuperFrost one day before defrosting.
• The frozen goods are provided with a “cold reserve”.
• The temperature display goes out.
• If the temperature display does not go out, the child lock function (see 5.2 Child proofing) is active.
•  Pull out the power plug or switch off the fuse.
• If possible, put the frozen goods in the freezer drawer, wrapped in newspaper or a blanket, and store in a cool place.
• Defrosting is speeded up.
• Leave the door of the appliance open while defrosting.
• Remove detached pieces of ice.
• If necessary, pick up defrost water several times, using a sponge or cloth.
• Clean the appliance (see 6.2 Cleaning the appliance)

Cleaning the appliance

Risk of injury and damage as a result of hot steam! Hot steam can lead to burns and can damage the surfaces.

• Do not use any steam cleaners
• Do not use cleaning agents in concentrated form.
• Do not use any scouring or abrasive sponges or steel wool.
• Do not use any sharp or abrasive cleaning agents, nor any that contain sand, chloride or acid.
• Do not use chemical solvents.
• Do not damage or remove the type plate on the inside of the appliance. It is important for the customer service.
• Do not pull off, bend or damage cables or other compo-nents.
• Do not allow any cleaning water to enter the drain channel, ventilation grille or electrical parts.
• Please use soft cleaning cloths and a universal pH-neutral cleaning agent.
• Please use cleaning and care products suitable for contact with foodstuffs in the appliance interior.

Empty appliance. Pull out the power plug.

• Clean the vent grille regularly.
• Dust deposits increase energy consumption.
• Clean plastic outer and inner surfaces with lukewarm water and a little washing-up liquid.
• Only use a soft clean cloth to wipe side walls with a paint finish. In the case of heavy soiling, use lukewarm water with neutral cleaning agent.
• Use only a soft clean cloth to wipe door surfaces with a paint finish. In the case of heavy soiling, use a little water or neutral cleaning agent. A micro-fibre cloth can be used optionally.
• Clean drawers by hand with lukewarm water and a little washing up liquid.
• Clean other items of equipment by hand with lukewarm water and a little washing-up liquid.

After cleaning:

•  Wipe dry the appliance and items of equipment.
• Connect the appliance and switch it on again.
• Switch on SuperFrost (see 5.8 SuperFrost) . When the temperature is sufficiently cold:
• Put the food back inside.

Customer service
First check whether you can correct the fault yourself by refer-ence to the list (see 7 Malfunctions) . If this is not the case, please contact the customer service whose address is given in the enclosed customer service list.

• Have any repairs and action – not expressly specified -on the appliance and mains cable carried out by service personnel only. (see 6 Maintenance)
• Read the appliance designation Fig. 11 (1) , service No. Fig. 11 (2) andserial No. Fig. 11 (3)off the type plate located inside the appliance on the left- hand side.
• Notify the customer service, specifying the fault, appliance designation Fig. 11 (1) , service No. Fig. 11 (2) and serial No. Fig. 11 (3) .
• Keep the appliance closed until the customer service arrives.
• This will help us to provide you with a faster and more accu-rate service.
• Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse.
• The food will stay cool longer.

Malfunctions

Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself

The appliance is not switched on. Switching on the appliance.The power plug is not properly inserted in the wall socket. Check power plug. The fuse of the wall socket is not in order. Check fuse.
The compressor runs for a long time.
The compressor switches to a low speed when little cold is needed. Although the running time is increased as a result, energy is saved. This is normal in energy-saving models. SuperFrost is activated. The compressor runs for longer in order to rapidly cool the food. This is normal.
A LED on the bottom rear of the appliance (at the compressor) flashes regularly every 15 seconds*.
The inverter is equipped with a diagnostic LED. The flashing is normal.
Excessive noise.
Due to the various speed steps, speed-regulated* compressors can generate different running noises. The sound is normal. A bubbling and gurgling noise. This noise comes from the refrigerant flowing in the refrigeration circuit. The sound is normal. A quiet clicking noise. The noise is produced whenever the refrigeration unit (motor) automatically switches on or off. The sound is normal. A hum. It is briefly a little louder when the refrigeration unit (the motor) switches on.  The refrigeration increases automatically when the SuperFrost, function is activated, fresh food has just been  placed in the appliance or the door has been left open for a while.u The sound is normal.  The ambient temperature is too high. u Solution: (see 1.2 Appliance range of use)Vibration noises The appliance is not standing firmly on the floor. As a result objects and adjacent units start to vibrate when the refrigeratoris running.  Align the appliance using the adjustable feet.  The SuperFrost symbol Fig. 3 (4) flashes together with thetemperature display.  There is a fault. u Please contact the after-sales service (see 6 Maintenance) . DEMO shines in the temperature display.  The demo mode is activated. u Please contact the after-sales service (see 6 Maintenance) .The outer surfaces of the appliance are warm*. The heat of the refrigeration circuit is used to preventcondensate from forming.   This is normal. The temperature is not cold enough.  The door of the appliance is not properly closed. u Close the door of the appliance.Insufficient ventilation. u Keep ventilation grille clear, and clean it.  The ambient temperature is too high.u Solution: (see 1.2 Appliance range of use)   The appliance was opened too frequently or for too long. u Wait to see whether the appliance reaches the requiredtemperature by itself. If not, please contact the after sales service (see 6 Maintenance) .  Too much fresh food was placed inside without SuperFrost.u Solution: (see 5.8 SuperFrost) → The temperature is incorrectly set.u Set the temperature to a colder setting and check after 24 hours.  The appliance is too close to a source of heat (stove, heateretc). u Change the position of the appliance or the source of heat. Concentrated collection of ice on inside face at centre ofappliance cover. This build-up of ice is normal. Due to physical properties, ice concentrates inside the top of the appliance. u Remove the ice with a scraper tool.

Decommissioning

Switching off the appliance

• Press the On/Off button Fig. 3 (1) until the display goes dark. Release button.
• If the appliance cannot be switched off, the child lock function is active (see 5.2 Child proofing

Taking the appliance out of service

• Empty the appliance.
• Switch off the appliance (see 8 Decommissioning

Disposing of the appliance

• Remove mains connector.
• Clean the appliance (see 6.2 Cleaning the appliance)
• Leave the door open to prevent odour

Disposing of the appliance

The appliance contains some reusable materialsand should be disposed of properly – not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance  with the current local regulations and laws.Do not damage the disused appliance while removing it from  the cooling circuit, in case the coolant (information on themodel plate) ) or oil inside leaks out. For Germany: The appliance can be disposed of free of charge in Class 1 collection containers at your local recycling centre. When purchasing a new fridge/freezer and if your sales area is > 400 m2, the retailer with also take back the old appliance free of charge.

• Pull out the plug.
• Cut through the connecting cable.