Electrolux E7SI1-4WB Refine 700 Steam Iron Instructions

Electrolux E7SI1-4WB Refine 700 Steam Iron

WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available:

  • Model Number
  • PNC number
  • Serial number

The information can be found on the rating plate.

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes. It may be possible that your steam iron does not produce steam immediately after filling it with water. The reason for this is that air trapped in the inner system can delay this function a few seconds. Please be patient and try it again by pressing the steam on/off button. For your convenience the steam will be produced after you release the steam on/off button for a few seconds and it is not necessary to press the button all the time. Find out your rhythm for the best steaming result.

COMPONENTS

  • A. Hot soleplate indicator
  • B. Water spray nozzle
  • C. Light indicator for heat-up/cool-down
  • D. Headlight illuminating ironing area
  • E. Temperature selector
  • F. Water filling container
  • G. Steam jet button
  • H. Spray button
  • I. Steam on/off button
  • J. Power cord
  • K. Flush Clean button
  • L. Soft Water Activator, replaceable
  • M. Water tank with max level indicator
  • N. Cord wrap facility
  • O. RESILIUM anodized ski-sloped soleplate
  • P. Water fill & Water Softener System cover
  • Q. Iron heel
  • R. Steam button lock

GETTING STARTED AND OPERATING INSTRUCTIONS

  1. Before first use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water tank to remove foreign particles. Position the steam iron horizontally on the ironing board or on a heat-resistant, secure surface at the same height as an ironing board. Unwind and straighten the power cord.
  2. Fill the steam iron with water. Make sure, the plug is outside the power outlet. Raise the heel of the iron, open the filling aperture cover (P). Use the water filling container provided (F), and pour water to maximum level (M). Close the cover (P). This product is appropriate for use with tap water. It is recommended to use Electrolux AquaSense filtered water resp. a mix of 50% distilled, 50% tap water if the tap water is particularly hard. Always refill the water tank to MAX level using cold water.
    Caution! Never operate the appliance without any water in the tank.
    This product is equipped with a detachable Soft Water Activator (L), we recommend replacing the Soft Water Activator every 3 months. Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are transferred to your garments. If necessary, wipe the soleplate with a slightly damp cloth.
  3. Connect the steam iron to the main supply. Select the ironing program from the temperature selector (E) on the steam iron. The light indicator (C) on the iron will pulsate when preheating. When turned on for the first time, temporary vapors/odors may occur. The iron is equipped with an auto-steam function, which automatically adjusts the steam output to the selected ironing program supporting best ironing results.
  4. As soon as the selected temperature has been reached, the lights indicator (C) is on permanently and the head-light (D) turns on. Now the iron is ready to be used.
  5. To activate the steam function, press and hold the steam on/off button (I). To stop the steam function, release the steam on/off button.
  6. To use the continuous steam function, slide the steam button lock (R). To stop the continuous steam function, slide the steam button lock.
  7. For extra steam, press the steam jet button for one second. Iron with extra steam: Press the steam buttons the same time for improved crease removal. When releasing the buttons, use up the steam before putting the iron back on its heel.
    Caution! Never release steam while the iron is standing on its heel.
    Dry ironing: When not pressing steam buttons, the iron will be in dry mode.
  8. Using the spray mist. Pre-damp fabrics by pressing the spray button several times to release a fine mist; ensure the tank is at least half full.
  9. Steam hanging items. The vertical steam function is ideal for curtains and suits. Hold the iron at a distance of 10-20 cm and press the steam jet button.
  10. The iron is equipped with a 3-way auto-off function. If the iron is left unattended on the soleplate or the side, it automatically turns off after 30 seconds. If left unattended on the heel it automatically turns off after 8 minutes. To turn it on again, move the iron. A short beep can be heard before the iron is switched off by itself. To reactivate the iron, move it shortly and it is back to working mode.
  11. To switch off the steam iron, turn the temperature selector to position 0, a short beep can be heard and all lights will turn off. Disconnect the mains plug. Never pull the supply cord. Instead, grasp the plug and pull. Empty the water tank and let the iron cool completely before storage.
  12. Always store the iron on its heel with the cord twisted loosley around the cable wrap facility. To clean exterior surfaces, use damp soft cloth and wipe dry. Do not use any chemical solvents, as they may damage the surface.
    CLEANING (DO NOT USE ANY DETERGENT)
  13. Flush Clean (K). Fill the tank with water to max level (M) and select “Linen” program. When the headlight flashes, unplug the iron. Hold the iron over a sink, and press the Flush Clean button (K). Use a full tank of water. Release button to stop Flush Clean function. Repeat the procedure if necessary.
    NOTE: DO NOT USE ANY DESCALING FLUID, VINEGAR OR CITRUS ACID!
  14. Soft Water Activator (L) is recommended right after Flush Clean. Open water filling cover (P) and pull the Soft Water Activator (L) out for disposal. Replace with new Water Softener System Electrolux EDC03/900923064. Both Flush Clean & Water Softener System in combination ensure a clean, soft steam for best ironing results and longer lifetime of your steam iron.
  15. Cleaning the soleplate (O). To remove burnt residues, iron over a damp cloth while the iron is still hot. To keep the soleplate smooth, avoid contact with metal objects. Never use scouring pads or harsh cleaners as they may damage the surface.
    HOT SOLEPLATE INDICATOR (A)
  16. Your appliance is equipped with hot soleplate indicator ThermoSafe™ which detects when the soleplate is hot by changing its color from black to red.
    Note! During heat-up time, the soleplate might be hot even though the sticker didn’t turn red. Once the temperature
    of the soleplate is < 40°C, the color changes back to black showing the iron is ready to be stored away.

SAFETY ADVICE

Read the following instruction carefully before using machine for the first time.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be made by children without supervision.
  • Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
  • The surfaces are liable to get hot during use .
  • This product is appropriate for use with tap water. It is recommended to use Electrolux AquaSense filtered water, taking out impurities like limescale. If the tap water is particularly hard, use a mix of 50% distilled water and 50% tap water.
  • The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!
  • The iron is not to be used if it has been dropped, if there are visible signs of damage on the iron or its cord or if it is leaking.
  • The appliance must only be connected to an earthed socket. If necessary an extension cable suitable for 16 A can be used.
  • If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard.
  • The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
  • Never leave the appliance unattended while connected to the supply mains.
  • The appliance must be switched off and the mains plug withdrawn each time after use, before cleaning and maintenance.
  • The plug must be removed from the socket outlet before the water reservoir is filled with water.
  • The mains cable must not come into contact with any hot parts of the appliance.
  • Do not immerse the appliance in water or any other liquid.
  • Do not exceed the maximum filling volume as indicated on the appliances.
  • The filling aperture must not be opened during use.
  • Before refilling of the water reservoir, please remove plug from socket.
  • Do not pour vinegar, descalers or other scented substances into the tank. Otherwise, the warranty may be revoked.
  • This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.

IRONING CHART

FABRIC TEMPERATURE SETTING IRONING RECOMMENDATION
Acrylic Outdoor / Delicate Dry iron inside out.
Acetate Outdoor / Delicate Dry iron inside out while still damp or use spray to dampen.
Nylon & Polyester Outdoor / Delicate Iron inside out while still damp or use spray to dampen.
Rayon Outdoor / Delicate Iron inside out.
Viscose Outdoor / Delicate Iron inside out.
Silk Outdoor / Delicate Iron inside out. Use an ironing cloth to prevent shiny iron marks.
Cotton blends Outdoor / Delicate Check the label and follow the manufacturer’s instructions. Outdoor setting is recommended for this kind of fiber.
Water-repellent breathable fabrics (excluding PVC coatings) Outdoor Gently wash and air-dry your outdoor garments according to their care label instructions. Carefully and slowly dry iron the outside to reach all parts of your garment in order to reactivate the DWR (Durable Water Repellency) treatment and restore the water repellency of your garment*. You can use this setting after washing and air-drying your outdoor garment or anytime you want to restore the water repellency of certain areas of your garment.

 

* Better than air drying only for water-repellent outdoor garments

Wool & Wool blends Wool Iron inside out or use ironing cloth.
Cotton Cotton Dry iron while still damp or use spray to dampen. Use maximum steam.
Corduroy Cotton Steam iron inside out or use ironing cloth.
Linen Cotton or       Linen Iron inside out or use ironing cloth to prevent shiny iron marks, especially with dark-colored fabrics. Dry iron while still damp or use spray to dampen. Use maximum steam.
Denim Cotton or       Linen Use maximum steam. Apply maximum steam by pressing and holding the steam on/off button.
Please follow the instructions of your garment care label.

Varied ironing speed and fabric dampness might cause optimal settings to differ from the recommendations in the table!

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION
Soleplate is not heating even though iron is turned on. Connection problem Check main power supply cable, plug and outlet.
Temperature control is in “Outdoor” position. Select higher program like “  Cotton”.
Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”, no 2).
Selected temperature is lower than that specified to use with steam. Increase temperature to at least “

Cotton”.

Steam jet and vertical steam jet function does not work. Steam jet function was used very frequently within a short period. Put iron on a horizontal position and wait before using steam jet function.
Iron is not hot enough. Adjust the proper temperature to steam ironing (up to “  Cotton”). Put iron in a vertical position and wait until the temperature indicator light turns off.
Water leaks from the soleplate during ironing. The iron is not hot enough. Select the Cotton setting (“  Cotton” to maximum) suitable for steam ironing. Put the iron on its heel and wait until the headlight is on before you start ironing.
Flakes and impurities come out of the soleplate during ironing. You have used hard water, which has caused scale flakes to develop in the water tank. Clean the iron according to the Cleaning section. Press and hold the steam button for about one minute to get steam. Then hold one more minute in order to clean the steam generating system. Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are transferred to your garments.
Water leaks from the soleplate while the iron is cooling down or after it has been stored. The iron has been put in a horizontal position while there is still water in the water tank. Empty the water tank.
Brown streaks come out of the soleplate while ironing and stain the linen. You may have used chemical descaling agents different from the recommendation. To prevent this from happening, it is recommended to exchange the Soft Water Activator according to the indications.
Fabric fibers have accumulated in the holes of the soleplate and are burning. Clean the soleplate with a damp soft cloth.
Fabrics might not be properly rinsed or the garments are new and have not been washed before ironing. Please rinse the fabrics properly before ironing them.

DISPOSAL

The symbol on the product indicates that this product contains a battery which shall not be disposed of with normal household waste. The symbol on the product or on its packaging indicates that the product may not be treated as household waste. To recycle your product, please take it to an official collection point or to an Electrolux service center that can remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s rules for the separate collection of electrical products and rechargeable batteries.
Electrolux reserves the right to change products, information, and specifications without notice.