LG HBS-FN7 Stereo Headset User Manual
USER MANUAL
LG TONE Free
Bluetooth® LG Stereo Headset
HBS-FN7
Rev 2.0 VN
https://play.google.com/store/apps/details?id=com.lge.tonentalkplus.tonentalkfree | https://play.google.com/store/apps/details?id=com.lge.tonentalkplus.tonentalkfree |
www.lg.com
Copyright © 2020 – 2021 LG Electronics Inc. All Rights Reserved
Product Components
LG TONE Free™ Earbuds (medium eargels installed) UV Charging Case / |
Extra Ear Gels (small & large) / | USB Type C™ Charging Cable / |
User Manual / | Warranty Card / |
NOTE: Actual product design may differ from images shown in the manual.
Overview
Charging Case
Earbuds
How to pair
- Turn on the Bluetooth function on the mobile phone or the device to be connected.
- Open the cover of the charging case with the earbuds mounted on the case. Press the pairing button for 3 to 5 seconds until the blue battery status lamp blinks.
- When the Fast Pair connection pop-up appears on the top area of the mobile phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher and requires configuring Bluetooth and location information settings of the mobile device. - If the pop-up does not appear, select [LG HBS-FN7] from the Bluetooth menu on the mobile phone and connect it (for users of iOS or Android 5.0 or lower versions).
In the list of Bluetooth-connected devices, LG HBS-FN7_LE is not the correct model name for the connection. Check the model name in use and connect with the model
name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
Wearing Earbuds
- Separate the earbuds from the charging case and adjust them so that they fit comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by turning the part with dotted line in the image below to left or right and lifting the earbuds. - When you wear the earbuds, you will hear a wearing detection alarm.
Playing Musi
Function | Description |
Play
|
|
Adjusting the Volume
|
|
Play Next |
|
• NOTE: You can change the operation method of the function in the touchpad settings of the LG TONE Free app.
Placing a Call
Function | Description |
Answering Calls | |
Ending Calls | |
Rejecting Calls |
Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
Listen to the Ambient Sound (LAS)
The Listen to the Ambient Sound (LAS) function allows you to listen to the ambient sound so that you can recognize the surrounding situation and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS model.
• NOTE: ANC is an acronym for Active Noise Cancellation
Active Noise Cancellation (ANC)
UVnano
The charging case has a built-in UVnano LED, which allows you to use your earbuds cleanly. If you charge the earbuds wired after mounting them on the charging case and closing the cover, the UVnano LED operates for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit, nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
Charging
When the charging cable is connected, the charging status is displayed in the charging case.
Wireless Charging
Align the bottom center of the charging case with the center of the wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function may not work in some wireless chargers. Wireless charging feature charge at a slower rate
due to less power being transmitted to the charging case.
Checking the Battery Status
If earbuds are mounted in the charging case, the earbuds’ battery status is displayed.
Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the UVnano process will commence for ten minutes.
Once this process is complete, the charging case’s battery status will be displayed.
Battery Status Indicator | Remaining Battery (charger not connected) | Charging State (charger connected) |
Red |
20% or lower | Charging |
Yellow |
20% – 80% /
|
– |
Green |
80% or higher | Fully charged |
• NOTE: When the charging case lid is closed, the charging case battery status is displayed. If the charging case has no remaining charge, there will be no display and it cannot function. We recommend you keep the charging case charged at all times as the earbuds are not able to be turned on and turned off independently.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud Battery, Voice Alert, Change Equalizer Mode, Check Last Connected Location Information, and Find My Earbuds functions. Check out the app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the Google Play Store or App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
https://play.google.com/store/apps/details?id=com.lge.tonentalkplus.tonentalkfree | https://apps.apple.com/app/lg-tone-talk-free/id1498881097 |
Precautions When Using the Product
If the product is exposed to excessive sweat, clean the product. | |
Keep the earbuds clean. |
RISK GROUP 2 | |
|
CAUTION: UV EMITTED FROM THIS PRODUCT. EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE. USE APPROPRIATE SHIELDING. |
WARNING
: WHEN OPENING THE CHARGING CASE OR WIRELESS CHARGING, THE UV FUNCTION DOES NOT WORK.
|
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open-source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers, and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media,
shipping, and handling) upon email request to .
This offer is valid for a period of three years after our last shipment of this product.
This offer is valid to anyone in receipt of this information.
LG TONE Free
Specifications and Features
Item | Comments |
Bluetooth Specifications | V 5.0 (Headset/Hands-Free/A2DP/AVRCP) |
Battery | Earbud : 3.7 V / 55 mAh, Lithium-ion Charging case : 3.7 V / 390 mAh, Lithium-ion |
Music Play Time Earbuds & With Charging case (ANCON) | Up to 7 & Up to 21 hours (Up to 5 / Up to 15 hours)* |
Charging Time | Earbud: within an hour / Charging case: within 2 hours Fast Charging: 5 min charge for up to 60 min playtime ※ When charging wired at room temperature |
Rated Input Voltage | Earbud : DC 5 V, 110 mA Charging case : DC 5 V, 500 mA |
Operating Temperature | 0°C (+32°F) ~ +40°C (+104°F) |
Dimensions |
Earbud : 16.2 mm (W) X 32.7 mm (L) X 26.8 mm (H) Charging case : 54.5 mm (W) X 54.5 mm (L) X 27.6 mm (H) |
Weight |
Earbud: 5.6 g (One earbud) Charging case: 39 g |
Frequency range | 2402 MHz to 2480 MHz |
Output power (Max.) | 10 dBm |
*Duration of use may vary depending on the connected mobile device, features being used, settings, signal strength, operating temperature, frequency band, and other methods of use. The fast charging feature does not apply when the charging case is placed on a wireless charging device such as a pad.
Wireless charging feature charge at a slower rate due to less power being transmitted to the charging case.