Philips AC2889 Air Purifier User Manual

PHILIPS AC2889 Air Purifier

 Important safety instructions

Safety
Read this user manual carefully before you use the appliance, and save it for future reference.
Danger

•  Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard.
•  Do not clean the appliance with water, any other liquid, or a (flammable) detergent to avoid electric shock and/or a fire hazard.
•  Do not spray any flammable materials such as insecticides or fragrance around the appliance.

Warning

• Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance.
• If the power cord is damaged, you must have  it replaced by Philips, a service center authorized by Philips, or similarly qualified persons in order to avoid a hazard.
•  Do not use the appliance if the plug, the power cord, or the appliance itself is damaged.
•  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Child shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision.
•  Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlet.
•  Make sure that foreign objects do not fall into the appliance through the air outlet.
• Standard WiFi interface based on 802.11b/g/n at 2.4 GHz with a maximum output power of 17 mW EIRP.

Caution

•  This appliance is not a substitute for proper ventilation, regular vacuum cleaning, or use of an extractor hood or fan while cooking.
• If the power socket used to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure that you plug the appliance into a properly connected power socket.
•  Always place and use the appliance on a dry, stable, level, and horizontal surface.
•  Leave at least 20cm free space behind and on both sides of the appliance and leave at least 30cm free space above the appliance.
•  Do not place anything on top of the appliance.
•  Do not sit or stand on the appliance. Sitting or standing on the appliance may lead to potential injury.
•  Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance.
• Make sure all filters are properly installed before you switch on the appliance.
•  Only use the original Philips filters specially intended for this appliance. Do not use any other filters.
• Combustion of the filter may cause inreversible human hazard and/or jeopardize other lives. Do not use the filter as fuel or for similar purpose.
• Avoid knocking against the appliance (the air inlet and outlet in particular) with hard objects.
• Always lift or move the appliance by the handle on back side of the appliance.
•  Do not insert your fingers or objects into the air outlet or the air inlet to prevent physical injury or malfunctioning of the appliance.
• Do not use this appliance when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes.
• Do not use the appliance near gas appliances, heating devices or fireplaces.
• Always unplug the appliance after use and before cleaning, or carrying out other maintenance or replacing the filters.
• Do not use the appliance in a room with major temperature changes, as this may cause condensation inside the appliance.
•  To prevent interference, place the appliance at least 2 meters away from electrical appliances that use airborne radio waves such as TVs, radios, and radio-controlled clocks.
• The appliance is only intended for household use under normal operating conditions.
• Do not use the appliance in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet, or kitchen.
• The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals.
• If you need to move the appliance, disconnect the appliance from the power supply first.
• Do not move the appliance by pulling its power cord.
• Always cleanse your hands after changing the filters.
• Unplug the appliance to override smart enabled or remote functions.

Your air purifier

Congratulations on your purchase, and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Product overview

• A: Air outlet
• B: Control panel
• C: Air quality light
• D: Air quality sensors
• E: NanoProtect filter HEPA Series 3 (FY2422)
• F: NanoProtect filter Active Carbon (FY2420)
• G: Pre-filter
• H: H1, H2 and H3 air inlets
• I: Front panel

Controls overview

• J: On/Off button
• K: Light dimming button
• L: Auto mode button
• M: Display screen
• N: Pollution mode icon
• O: Allergen mode icon
• P: Bacteria & Virus mode icon
• Q: Fan speed button
• R: Timer button
• S: Reset button

Getting started

Installing the filters

Note:

• Make sure the air purifier is unplugged from the electrical outlet before installing the filters.
• Make sure the side of the filter with the tag is pointing towards you.

1. Pull the bottom part of the front panel to remove it from the air purifier (fig. c).
2. Press the two clips down (1) and pull the pre-filter towards you (2) (fig. d).
3. Remove all filters (fig. e).
4. Remove all packaging materials from the filters (fig. f).
5. Place the thick filter (FY2422) into the air purifier and then the thin AC filter (FY2420) (fig. g). The model numbers are shown on each filter.
6. Attach the pre-filter back into the air purifier (fig. h).
   Note: Make sure the side with the two clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the purifier.
7. Reattach the front panel by pressing the top part of the panel onto the top of the air purifier (1). Then, gently push the panel against the body of the air purifier (2) (fig. i).
8. Wash your hands thoroughly after installing filters.

Wi-Fi connection

Setting up the Wi-Fi connection for the first time

1. Download and install the Philips “Clean Home+” app from the App Store or Google Play.
2. Put the plug of the air purifier in the power socket and touch Power Button to turn on the air purifier.
3. The Wi-Fi indicator WIFI blinks orange for the first time.
4. Make sure that your smartphone or tablet is successfully connected to your Wi-Fi network.
5. Launch the “Clean Home+” app and click on “Connect a New Device” or press the “+” button on the top of the screen. Follow the onscreen instructions to connect the air purifier to your network.
6. After the successful pairing and connection, the Wi-Fi indicator will light up white. If pairing is not successful, consult the troubleshooting section, or the help section in the “Clean Home+”
   app for extensive and up-to-date troubleshooting tips.

Note

• This instruction is only valid when the air purifier is being set up for the first time. If the network has changed or the setup needs to be performed again, consult section “Reset the Wi-Fi connection” on page 6.
• If you want to connect more than one air purifier to your smartphone or tablet, you have to do this one by one. Complete the set up of one air purifier before you turn on the other air purifier.
• Make sure that the distance between your smartphone or tablet and the air purifier is less than 10 m without any obstructions.
• This app supports the latest versions of Android and iOS. Please check www.philips.com/cleanhome for the latest update of supported operating systems and devices.

Reset the Wi-Fi connection

Note:

• This applies when the default network to which your purifier is connected has changed.
• Reset the Wi-Fi connection when your default network has changed.

1. Put the plug of the air purifier in the power socket and touch to turn on the air purifier.
2. Touch and simultaneously for
3. seconds until you hear a beep.
   • » The air purifier goes to pairing mode.
   • » The Wi-Fi indicator blinks orange.
4. Follow the steps 4-5 in “Setting up the Wi-Fi connection for the first time” section.

Using the air purifier

Understanding the air quality light

The air quality light automatically goes on when the air purifier is switched on, and lights up all colors in sequence. After approximately 30 seconds, the air quality sensors select the color that corresponds to the ambient air quality.

Turning on and off

Note: 

• Always place the air purifier on a stable, horizontal, and level surface with the front of the unit facing away from walls or furniture.
• For optimum purification performance, close doors and windows.
• Keep curtains away from the air inlet or air outlet.

1. Put the plug of the air purifier in the wall outlet.
2. Touch Power to switch on the air purifier
   • The air purifier beeps.
   •  The air purifier operates under the Pollution mode by default.
   •  When the air purifier is warming up, ” ” displays on the screen. After measuring the particulate matter only in the air, the air purifier shows the PM2.5 level and operates in the auto mode with displayed on the screen (fig. k).
   • After measuring the air quality for approximately 30 seconds, the air quality sensor automatically selects the appropriate air quality light color.
3. Touch and hold Power for 3 seconds to switch off the air purifier.

Note: After the appliance is switched off by the on/off button , if the plug is still in the power socket, the appliance will operate under the previous settings when it is switched on again.

Pollution mode
The specially designed pollution mode can effectively remove airborne pollutants such as PM2.5.

• Touch the Auto mode button A to select the Pollution mode (fig. l2).
  • Auto (A) and display on the screen.

Allergen mode
The extra-sensitive allergen mode is designed to react to even a small change in allergen levels in the surrounding air.

Touch the Auto mode button select to the Allergen mode (fig. 13).

Bacteria & Virus mode
The bacteria & virus mode boosts the airflow to quickly reduce bacteria & viruses.

Changing the fan speed

In addition to the Auto modes, there are several fan speeds available.
When using the manual fan speed settings, the purifier will still monitor the air quality, but it will not automatically adjust the fan speed if it detects changes in the air quality.

Sleep (SL)
In sleep mode, the air purifier operates quietly on a very low speed.

Touch the fan speed button Fan to select the sleep mode (Fig 15 )

Note:

• All the lights will go off in sleep mode.
• You can turn on the lights manually by touching .

Manual

• Touch the fan speed button repeatedly to select the fan speed you need (fig. p).

Turbo (t)
In turbo mode, the air purifier operates on the highest speed.

• Touch the fan speed button Fan to select the turbo mode (fig 17)

Setting the timer
With the timer, you can have the air purifier operate for a set number of hours. When the set time has elapsed, the air purifier will automatically switch off.

• Touch the timer button repeatedly to choose the number of hours you want the air purifier to operate (fig. r). The timer is available from 1 to 12 hours.
  To deactivate the timer, touch the timer button repeatedly until “—” displays on the screen.

Note: If you set the timer once, next time you use the timer, it starts from the previous setting time.

Using the light on/off function
With the light dimming button, you can switch on or off the air quality light, the display screen and the function indicator if desired.

1. Touch the light dimming button once, the air quality light will be dimmed.
2. Touch the light dimming button again, the air quality light will go off.
3. Touch the light dimming button for the third time, all lights will be on again.

Switching the display mode
The air purifier has two display modes: PM2.5 display mode and IAI (Indoor Allergen Index) display. In PM2.5 mode the display shows the particulate matter 2.5 concentration in the air in µg/m3. When in IAI mode, the display shows
a number between 1-12 to indicate the level of airborne allergens.

Note: The air purifier operates in PM2.5 display mode by default.

1. Touch the light dimming button for 3 seconds to switch to IAI display mode (fig. s).
   • blinks twice.
   • The IAI level displays on the screen.
2. Touch the light dimming button for 3 seconds again to switch back to PM2.5 display mode (fig. t).
   • blinks twice.
   • The actual PM2.5 level displays on the screen.

Cleaning

• Always turn the air purifier off and unplug from the electrical outlet before cleaning.
• Never immerse the air purifier in water or any other liquid.
• Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to clean any part of the air purifier.
• Only the pre-filter is washable. The air purification filter is not washable nor vacuum cleanable.
• Do not attempt to clean the filters or air quality sensor with a vacuum.

Cleaning the body of the air purifier

Regularly clean the inside and outside of the air purifier to prevent dust from collecting.

1. Use a soft, dry cloth to clean both the interior and exterior of the air purifier.
2. The air outlet can also be cleaned with a dry, soft cloth.

Cleaning the air quality sensor

Clean the air quality sensor every 2 months for optimal functioning of the purifier.

Note

• If the air purifier is used in a dusty environment, it may need to be cleaned more often.
• If the humidity level in the room is very high, condensation may develop on the air quality sensor and the air quality light may indicate a more poor air quality even though the air quality is actually good. If this occurs, clean the air quality sensor or use the air purifier on a manual speed setting.

1. Switch off the air purifier and unplug from the wall outlet.
2. Clean the air quality sensor inlet and outlet with a soft brush (fig. u).
3. Open the air quality sensor cover (fig. v).
4. Clean the air quality sensor, the dust inlet and the dust outlet with a damp cotton swab (fig. w).
5. Dry all parts thoroughly with a dry cotton swab.
6. Reattach the air quality sensor cover (fig. x).

Cleaning the pre-filter

Clean the pre-filter when F0 is displayed on the screen(fig. y).

1. Switch off the air purifier and unplug from the wall outlet.
2. Pull the bottom part of the front panel to remove it from the air purifier (fig. c).
3. Press the two clips down (1) and pull the pre-filter towards you (2)(fig. d).
4. If the pre-filter is very dirty, use a soft brush to brush away the dust (fig. z). Then wash the pre-filter under running tap water.
5. Allow the pre-filter to air dry thoroughly before placing back in the air purifier.
   Note:
   • To optimize the lifetime of the pre-filter, make sure it air dries completely after cleaning.
   • Wash your hands after handling the filter.
6. Put the pre-filter back into the air purifier (fig. h).
   Note: Make sure the side with the two clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the air purifier.
7. To reattach the front panel, press the top part of the panel onto the top of the air purifier (1). Then, gently push the panel against the body of the air purifier (2) (fig. i).
8. Put the plug of the air purifier in the wall outlet.
9. Touch and hold the reset button for 3 seconds to reset the pre-filter cleaning time (fig. {).
10. Wash your hands thoroughly after installing filters.

Replacing the filters

Filter replacement indicator
This air purifier is equipped with a filter replacement indicator to make sure that the air purification filter is in optimal condition when the air purifier is operating. When the filters need to be replaced, the filter code displays on the screen (see Filter alert chart).
If the filters are not replaced in time, the air purifier will stop operating and automatically lock to protect the air quality in the room. Replace the filters as soon as possible according to the filter code.

• The air purification filters are not washable nor vacuum cleanable.
• Always turn off the air purifier and unplug from the electrical outlet before replacing the filters.
• Do not clean the filters with a vacuum.
• If the pre-filter is damaged, worn or broken, do not use. Visit www.philips.com/support or contact the Consumer Care Center in your country.

1. Turn off the air purifier and unplug from the wall outlet.
2. Take out the used air filter according to the filter alert light status displayed on the screen (fig. 28). Discard used filters.
   • Do not touch the pleated filter surface, or smell the filters as they have collected pollutants from the air.
3. Remove all packaging material from the new filters (fig. 6).
4. Place the new filters into the air purifier (fig. g).
5. Put the plug of the air purifier in the wall outlet.
6. Touch and hold the reset button for 3 seconds to reset the filter lifetime counter (fig. 29).

Note: Wash your hands after changing a filter.

Filter reset
You can replace filters even if there is no filter replacement code displayed on the screen. After replacing a filter, you need to reset the filter lifetime counter manually.

1. Touch and simultaneously for 3 seconds to enter the filter reset mode (fig. 30) Code (A3) of the NanoProtect filter Series 3 displays on the screen.
2. Touch and hold for 3 seconds to force reset the filter lifetime counter of the NanoProtect filter Series 3 (fig. 29).
3. Code (C7) of the Nanoprotect filter active carbon displays on the screen after the lifetime counter of the NanoProtect filter Series 3 has been reset (fig. 31).
4. Touch and hold for 3 seconds to force reset the filter lifetime counter of the Nanoprotect filter active carbon and exit the filter reset mode (fig. 32).

Storage

1. Turn off the air purifier and unplug from the wall outlet.
2. Clean the air purifier, air quality sensor and pre-filter (see chapter ‘Cleaning’).
3. Let all parts air dry thoroughly before storing.
4. Wrap the filters and pre-filter separately in air tight plastic bags.
5.  Store the air purifier, filters and prefilter in a cool, dry location.
6. Always thoroughly wash hands after handling filters.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country.

Guarantee and service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Center in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.

Order parts or accessories
If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/support.
If you have problems obtaining the parts, please contact the Philips Consumer Care Center in your country (you can find its phone number in the worldwide guarantee leaflet).

Notices

Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Compliance with EMF
Philips Domestic Appliances Holding B.V. manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.
Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.
Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products.

Recycling
Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.
Follow your country’s rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

Notice
App Store is a service mark of Apple Inc.
Google Play is a trademark of Google Inc.
This Philips appliance and Clean Home+ app applied multiple open source softwares, Copies of open source software license text used in this product can be derived from website- www.philips.com/cleanhome.