AEG B2100-5-M Oven Instruction Manual

AEG B2100-5-M Oven Instruction

Operating Instructions

Control panel

Using the oven

Switching the oven On and Off

Turn the oven functions dial to the desired function
Turn the temperature selector to the desired temperature, the power indicator is lit as long as the oven is in operation. The temperature pilot light is lit as long as the oven is heating up
To turn the oven off, turn the oven function dial and temperature selector to the Off position.

Cooling fan: The fan switches on automatically in order to keep the appliance’s surfaces cool. When the oven is switched off, the fan continues to run to cool the appliance down, then switches itself off automatically.

Setting and changing the time

The oven only operates when the time has been set. When the appliance has been connected to the electrical supply or when there has been a power cut, the function indicator Time of day flashes automatically.

To change a time that has already been set, press the Selection Clock button repeatedly until the function indicator Time of day flashes.
Using the +or – button, set the current time.

After approx. 5 seconds, the flashing stops and the clock displays the time set. The appliance is now ready to use.

Cooling fan

The fan switches on automatically in order to keep the appliance’s surfaces cool. When the oven is switched off, the fan continues to run to cool the appliance down, then switches itself off automatically

Oven functions

Oven function		Application
	Light	Using this function you can light up the oven interior, e.g. for cleaning
	True Fan	For baking on up to three oven levels at the same time. Set the oven temperatures 20-40 °C lower than when using Conventional.
	Defrost	For defrosting e. g. flans and gateaux, butter, bread, fruit or other frozen foods

	Dual Grill	For grilling flat food items in large quantities and for toasting
	Rotitherm	For roasting larger joints of meat or poultry on one level.

Clock Functions

Minute minder To set a countdown. A signal sounds after the time has elapsed. This function does not affect the functioning of the oven.
Duration To set how long the oven is to be in use.
End To set when the oven is to switch off again.
Time of day To set, change or check the time

How to use the clock functions

After a function has been selected, the corresponding function indicator flashes for about 5 seconds. During this period, the desired times can be set using the + or – button.
When the desired time has been set, the function indicator continues to flash for approx. 5 seconds. After that the function indicator is then lit. The set time begins to run.
Press any of the buttons to stop the audible signal.
The desired oven function and temperature can be selected before or after the clock functions Duration and End are set.
When the cooking process is completed, turn the oven function dial and the temperature selector back to the OFF position.

Switching Off the Time Display

By switching off the time display you can save energy. Switching off the time display
Press and hold down any two buttons until the display becomes dark. Switching on the time display
Hold down any button until the time reappears in the display.
The display can only be switched off if none of the clock functions Duration, End, or Minute minder are in use.

Minute minder

Press the Selection button repeatedly until the function indicator Minute minder flashes.
Using the + or – button set the desired Countdown (max. 2 hours 30 minutes).
After approx. 5 seconds the display shows the time remaining.
The function indicator Minute minder lights up.
When the time has elapsed, the function indicator flashes and an audible signal sound for 2 minutes.
The signal can be stopped by pressing any button.

Duration

Press the Selection button repeatedly until the function indicator Duration flashes.
Using the + or – button set the desired cooking time.
After approx. 5 seconds the display returns to showing the current time. The function indicator Duration lights up.
When the time has elapsed, the function indicator flashes, an audible signal sounds for 2 minutes and the oven switches itself off.
The signal and the program can be stopped by pressing any button.

End

Press the Selection button repeatedly until the function indicator End flashes.
Using the + or – button set the desired switch-off time.
After approx. 5 seconds the display returns to showing the current time.
The function indicator End lights up.
When the time has elapsed, the function indicator flashes, an audible signal sounds for 2 minutes and the oven switch itself off.
The signal and the program can be stopped by pressing any button.

Duration and End combined Duration and End can be used simultaneously if the oven is to be switched on and off automatically at a later time.

Using the Duration function, set the time required for cooking the dish. (In this example, 1 hour.)
Using the End function, set the time at which the dish should be ready. (In this case 14:05:00)
The function indicators Duration and End light up and the current time is shown in the display. (In this case 12:05.)
The oven switches on automatically at the time calculated. (In this case, at 13:05:00.)
And switches itself off again when the cooking time entered has elapsed. (In this case, at 14:05.)

Download

AEG B2100-5-M Oven Instruction Manual

Was this manual helpful?