Bosch HC4000 Electric Converter Instruction Manual
HC4000 Electric Converter
Instruction Manual
Important notes on installation/assembly
The installation/assembly must be carried out by a professional who is authorized to do the work, and with due regard to the relevant regulations.
▶ Observe all the relevant instructions for other system components, accessories, and spare parts.
▶ Before starting any work: disconnect the system from the power supply across all phases.
▶ Country-specific standards and regulations with regard to installation and operation must be observed!
▶ The electrical connection provided by the customer must be equipped with a residual current protective device =< 30 mA. The product must not be opened.
If the product or connecting lead is defective:
▶ Dispose of the product properly.
EU Declaration of Conformity
You can find the EU Declaration of Conformity at www.bosch-thermotechnology.com under the section Declarations of Conformity.
Junkersstrasse 20-24
D-73249 Wernau/Germany
6720883016 (2021/01) zz
