Frigidaire WOMC3TRIM 3 Inch Stainless Steel Wall Oven Trim Instruction Manual
FRIGIDAIRE WOMC3TRIM 3 Inch Stainless Steel Wall Oven Trim
CAUTION
Before servicing any part of the appliance, make sure the appliance is off and the surfaces are cool.
ABOUT
This trim kit attaches to the cabinet below the wall oven. We recommend removing the oven door before installing the trim piece. See your Use & Care Manual for instructions on how to remove the oven door. Be sure to check the clearance and fit above any lower cabinet doors before installation. On 27” models, install the factory-included vent piece before installing the extension trim.
INSTALLATION
- Remove the back from the tape strips.
- Center the trim piece below the oven.
- Once in position, press trim adhesive against the cabinet surface.
Removing the tape
Use a plastic scraper to remove the tape. Be careful to not scratch the surface. Wet adhesive residue with a citrus-based cleaner or soap and water, allow to sit a few minutes, and use the scraper to remove. Always do a spot-test on varnished or painted surfaces before applying solvents or cleaners.