Electrolux E5TB1-701K UltimateTaste 500 High Power Blender Instructions

Electrolux E5TB1-701K UltimateTaste 500 High Power Blender

COMPONENT

HOW TO USE

CLEANING AND CARE

INSTRUCTION MANUAL

Graphics and drawings in this manual are solely for illustration purposes and are subject to variations from actual product. Read all instructions carefully before using the appliance for the first time. Keep this manual for future reference.

COMPONENTS

1.  Measuring cup
2. Lid
3. Borosilicate glass jar
4. Blade assembly
5. Blender base
6. Smoothie program
7. Hot soup program
8. Ice crush program
9. Speed selector
10. Non-slip feet
11. Grinder jar*
12. Grinder central blade*
13. Grinder blade holder* *certain models only

SAFETY ADVICE

• Remove and safely discard any packaging materials before using the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Keep the appliance and its power cord out of reach of children. Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be performed by children without supervision.
• The appliance can only be connected to a power supply which voltage and frequency comply with the specifications on the rating plate.
• Never use or pick up the appliance if – the power cord is damaged, or – the housing is damaged.
• If the appliance or its power cord is damaged, it must be replaced by Electrolux or its service agent in order to avoid hazard.
• Do not immerse the appliance, its power cord or plug in water or any other liquid.
• Do not use or place the appliance near the edge of the table or counter, near hot gas, stove, electric burner or heated oven.
• Always place the appliance on a flat, level and dry surface.
• Always switch off the appliance and disconnect it from the supply if it is left unattended and before changing of accessories, cleaning or maintenance.
• The blades and inserts are very sharp. Danger of injury. Care shall be taken when changing accessories, after use and during cleaning and maintenance.
• Never touch the blades or inserts with your hand or with any utensils while the appliance is plugged in and/or during operation.
• Keep hands and utensils away from the appliance during operation to avoid the risk of severe injury to persons or damage to the appliance.
• Ensure that the appliance is switched off before removing the jug or grinder from the motor base.
• Do not operate the appliance without food or liquid in the jug.
• Never operate the appliance without the lid or grinder cup.
• Do not use the appliance continuously for more than 2 minutes when processing heavy load. After using continuously for 2 minute with heavy loads, the appliance should be left to cool for at least 10 minutes before restarting.
•  When using the grinder, do not use the appliance continuously for more than 30 seconds at any one time. After using the grinder for 3 times without interruption, the appliance should be left to cool for at least 60 minutes before restarting.
• The jug cannot be used for blending or grinding hard and dry substances, except for ice cubes. Use the grinder to grind hard and dry substances (Eg. nuts, candy, rice etc…)
• Do not exceed the maximum filling volume as indicated on the appliances.
• Do not use this appliance to stir paint. Danger, could result in an explosion.
• Do not let the power cord come into contact with hot surfaces or hang over the edge of a table or counter.
• Never use accessories or parts made by other manufacturers not recommended or sold by Electrolux as it may cause a risk of injury to persons.
• This appliance is for indoor use only.
• This appliance is intended for domestic use only. Electrolux will not accept any liability for possible damage caused by improper or incorrect use.
• This appliance is suitable to operate on both 50 and 60Hz. No action needed from user to switch it between 50 and 60Hz.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

HOW TO USE

1. Cleaning – Make sure that you start with clean jar before use.
2. maximum capacity and program/speed setting

Notes! The blender doesn‘t have the functionality of heating up liquid directly inside it. Hot soup program means that the blender is capable in mixing the hot soup/liquid that is put inside without breaking the jar.

Grinder

Prepare the ingredients by rinsing them thoroughly and cut them into pieces no larger than 2cm size for best results and remove any hard or large seeds. Remove any thick peel from the fruit or vegetables. WARNING! Do not exceed the maximum filling volume as indicated on the jar. Pro Tips! The jar is made of borosilicate glass that can withstand even boiling water ( 100°C). Please ensure that the jar temperature is in room temperature ( 25°C) for at least 4 hours before pouring it with boiling water.
WARNING! Be careful when opening the lid ( 2 ) with hot liquid inside as released steam can cause burn.

Place the lid ( 2 ) on the jar ( 3 ) with the cap on the right side of jar handle, then turn it clockwise to make sure that it is securely locked. Fit the measuring cup ( 1 ) in the lid by rotating clockwise until it clicks into position. Pro Tips! You can add ingredients through the filler hole, while the blender is in operation. Place the jar ( 3 ) with attached blade assembly ( 4 ) on the blender base ( 5 ) with the handle to the  right. Rotate it clockwise until it locks into position.
WARNING! The appliance can’t be turned on unless the jar is perfectly fitted on the blender base.

Plug into mains. Turn the knob to the ”ON” position then select the program accordingly, or Turn the knob over ”ON” position onto the desired speed directly ( see no.2 program/speed setting).
WARNING! Never operate appliance without lid. Never run the blender empty, running the blender empty can cause overheating and can damage the product. Keep hands and utensils out of the blender jar while blending.
WARNING! During operation, do not remove your jar from blender base. If it’s necessary to remove the jar, please turn off the appliance first then remove it.
WARNING! With heavy load ( maximum capacity), do not let the blender run for more than 2 minutes. Allow it to cool down for at least 20 minutes before continuing. Pro Tips! With Pulse mode you can give the ingredients a quick mix to achieve your desired consistency. The blender will operate until the program is finished. To stop any program manually, turn the knob to OFF position. Remove the jar ( 3 ) from blender base ( 5 ) by turning it counterclockwise and pull it off, then pour and serve.  Wash the components right after use in order to avoid drying of food residue on components.Pro Tips! Always detach blade assembly with jar and rinse them clean even before placing it into the dishwasher. Fill the jar with 1.5L lukewarm water and dishwasher liquid then run MAX speed for 30 seconds for rinsing purpose.

•  Fill the ingredients in the grinder jar (11).
•  Push the central blade (12) to blade holder (13) to create a blade assembly. WARNING! The blades are very sharp!
•  Fasten the blade assembly on the open end of the jar by turning it clockwise. Turn the grinder upside down.
•  Push down the assembled grinder onto the blender base (5) and rotate it clockwise to lock until it clicks into position.
•  Turn the knob to the ”ON” position then select the program accordingly, or turn the knob over ”ON” position onto the desired speed directly (see no.2 speed setting). Once done, turn the knob to OFF position.
•  Turn the assembled grinder counterclockwise to release it off from blender base.
•  Take off the blade assembly by turning it counterclockwise.
  WARNING! Always take off the blade assembly within 1 minute after blending to avoid hard disassemble afterwards.
  WARNING! Do not touch the sharp blade after grinding as it might be hot after several grinding cycles.

CLEANING AND CARE

Always unplug the appliance before cleaning

1. Motor Housing. Never immerse the blender base in water! Clean it only with a damp cloth. Do not use  abrasive cleaners, scouring pads or abrasive detergents while cleaning the appliance.
2. Jar (3), blade assembly (4), lid (2), measuring lid (1) and all grinder parts (11-13) are dishwasher safe. If washing by hand, don’t use wire brush, steel wool or bleach to avoid rust.
   Notes: Always detach the blade assembly with jar for cleaning to ensure no leftover food stuck in between. Don’t immerse the Blade assembly into water completely.
   WARNING! the blades are very sharp. Handle carefully during cleaning.

DISPOSAL
This symbol on the product or on its packaging indicates that the product may not be treated as household waste. To recycle your product, please take it to an official collection point or to an Elec-trolux service center that can remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s rules for the separate collection of electrical products and rechargeable batteries.

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. Due to the Electrolux policy of continual product development; specifications, colours, and details of our products and those mentioned in this manual are subject to change without notice.