AEG DIE5961HG Cooker Hood User Manual

User Manual
Cooker Hood

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –  features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website to:

Get usage advice, brochures, troubleshooter, service, and repair information: www.aeg.com/support
Register your product for better service: www.registeraeg.com
Buy Accessories, Consumables, and Original spare parts for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.

SAFETY INFORMATION AND INSTALLATION

WARNING!
Refer to the separate Installation Instructions booklet for Safety

Information and Installation. Read carefully the Safety chapters before any use or maintenance of the appliance.

PRODUCT DESCRIPTION

2.1 Control panel overview

  1. On / Off
  2. First motor speed
  3. Second motor speed
  4. Third motor speed
  5. Maximum motor speed
  6. Breeze function
  7. Filter reminder
  8. Hob to hood function
  9. Lamp

DAILY USE

3.1 Using the hood

Check the recommended speed according to the table below.

While heating up food, cook with covered pots.
While cooking with covered pots on multiple cooking zones or burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or burners.
While boiling and frying big quantities of food without a lid, big humidity.
Refreshes the air in the kitchen after cooking at a very low noise level. It can be activated and de-activated by touching the symbol. The function turns off auto‐ matically after 60 minutes. Use after cooking only.

It is recommended to leave the hood operating for approximately 15 minutes after cooking.
The control panel is a sensor field. Touch the symbols for 1 second to activate the functions.

To operate the hood:

  1. Turn on the appliance by pressing the symbol. You can now activate the functions.
  2. To activate the function touch the symbol.
  3. If needed, touch the light symbol to illuminate the cooking surface.

To turn off the appliance press the symbol again.

3.2 Hob to Hood function
It is an automatic function that connects the hob with a hood. Both the hob and the hood have an infrared signal communicator. The speed of the fan is defined automatically on basis of the mode setting and the temperature of the hottest cookware on the hob. You can also operate the fan using the hob manually. The function can be activated from a panel of the hob.

For more information on how to use the function refer to the hob user manual.
3.3 Activating Maximum Motor Speed
When you press the button , the Maximum Motor Speed starts to operate for 6 minutes. After that time, the appliance returns to its previous speed settings.

When the function is turned on, additional touch on the button does not have any effects.

CARE AND CLEANING

4.1 Cleaning the grease filter
Each filter must be cleaned at least once a month. Filters are mounted with the use of clips and pins on the opposite side.
To clean the filter:
1. Pull the handle on the filter underneath the hood (1) and slightly tilt the front of the filter down.

3.4 Activating and deactivating the filter notification

The filter alarm reminds us to change or clean the charcoal filter and clean the grease filter. The filter indicator is turned on (red) for 30 seconds if the grease filter must be cleaned.  The filter indicator flashes (red) for 30 seconds if the charcoal filter must be replaced or cleaned.

Refer to filter alarm in the care and cleaning chapter.

  1. Switch on the control panel.
  2.  Make sure that the icons are turned off.
  3. To activate or deactivate the charcoal filter notification touch for 3 seconds.

If the charcoal filter notification is activated, the filter icon flashes (red) five times.
If the charcoal filter notification is deactivated, the filter icon flashes (red) three times.

2. Clean the filters using a sponge with non abrasive detergents or in a dishwasher.

The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolor, it has no influence on the performance of the appliance.
3. To mount the filters back follow the first two steps in reverse order. Repeat the steps for all filters if applicable.

4.2 Replacing the charcoal filter

WARNING!
The charcoal filter is nonwashable!
The time of saturation of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter.

To replace the filter:

  1. Remove the grease filters from the appliance.
    Refer to “Cleaning the grease filter” in this chapter.
  2. press the tab (1) and slightly tilt the front of the filter.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

www.aeg.com/shop