Bosch DRR16AQ20 Ceiling-Mounted Ventilation System User Manual

DRR16AQ20 Ceiling-Mounted Ventilation System
User Manual

Register your new device on MyBosch now and get free benefits: bosch-home.com/welcome 

Safety

Observe the following safety instructions.

• Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently.
• Follow the safety instructions and warnings.
• Keep the instruction manual and the product information safe for future reference or for the next owner.
• Check the appliance after unpacking it. Do not connect the appliance if it has been damaged in transit.

Intended use

This appliance is designed only to be built into kitchen units. Read the special installation instructions.
The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at
its installation location. Only use this appliance:

• For extracting cooking vapor.
• In private households and in enclosed spaces in a domestic environment.
• Up to an altitude of max. 2000 m above sea level.
  Do not use the appliance:
• With an external timer.

Restriction on user group
Avoid risks to children and vulnerable persons.
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting
dangers.
Children must not play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised.
Keep children under the age of 8 years away from the appliance and power cable.

WARNING ‒ Risk of suffocation! 
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

• Keep packaging material away from children.
• Do not let children play with packaging material.

WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.

• Never operate the appliance without a grease filter.
• Clean the grease filters regularly.
• Never work with naked flames close to the appliance (e.g. flambéing).
  Do not install the appliance near a solid fuel heating appliance (e.g. wood- or coal-burning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks.

Hot oil or grease ignites very quickly.

• Always supervise hot oil and fat.
• Never extinguish burning oil or fat with water. Switch off the cooking zone. Extinguish flames carefully using a lid, fire blanket, or something similar.

When gas burners are in operation without any cookware placed on them, they can build up a lot of heat. A ventilation appliance installed above the cooker may become damaged or catch fire.

• Only operate the gas burners with cookware on them.

Operating multiple gas hobs at the same time generates a great deal of heat. A ventilation appliance installed above the cooker may become damaged or catch fire.

• Only operate the gas hobs with cookware on them.
• Select the highest fan setting.
• Never operate two gas hobs simultaneously on the highest flame for longer than 15 minutes. Two gas hobs correspond to one large burner.
• Never operate large burners of more than 5  kW with the highest flame for longer than 15 minutes, e.g. a wok.

WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot during operation.

• Never touch these hot parts.
• Keep children at a safe distance.

The appliance will become hot during operation.

• Allow the appliance to cool down before cleaning it.

WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.

• Carefully clean the appliance interior.

Items placed on the appliance may fall off.

• Do not place any objects on the appliance.

Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.

• Do not make any changes to the electrical or mechanical assembly.

The filter cover may swing-out.

• Open the filter cover slowly.
• Take hold of the filter cover after opening it until it no longer swings out.
• Close the filter cover slowly.

Risk of injury when opening and closing the hinges.

• Keep your hands away from the hinges.

The light emitted by LED lights is very dazzling and can damage the eyes (risk group 1).

• Do not look directly into the switched-on LED lights for longer than 100 seconds.

Children may swallow batteries.

• Keep batteries out of the reach of children.
• Keep an eye on any children when you are replacing batteries.

Batteries may explode.

• Do not charge the batteries.
• Do not short-circuit the batteries.
• Do not throw batteries into a fire.

Risk of falling when working on the appliance

• Use a stable stepladder.
• Do not lean over the hob.
• Do not step on the hob or the work surface.

It may create an increased risk of injury if the appliance is operated by another person via the Home Connect app during cleaning.

• Before cleaning, disconnect the appliance from the Home Connect app.

WARNING ‒ Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous.

• Never operate a damaged appliance.
• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
• If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
• Call Customer Service. → Page 14
• Repairs to the appliance should only be carried out by trained specialist staff.

Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.

Ingress of moisture can cause an electric shock.

• Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.
• Do not use steam- or high-pressure cleaners to clean the appliance.

WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminum parts in the interior of the appliance may cause explosions.

• Never use highly caustic alkaline or highly acidic cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminum parts, e.g. grease filter on extractor hoods.

Preventing material damage

General
Follow these instructions when using the appliance.
ATTENTION!
Condensate may cause corrosion damage.

• To prevent condensation from building up, switch on the appliance during cooking.

If moisture gets into the controls, this may result in damage.

• Never clean controls with a wet cloth.
  Incorrect cleaning damages the surfaces.
• Follow the cleaning instructions.
• Do not use harsh or abrasive detergents.
• Clean stainless steel surfaces in the direction of the finish only.
• Never clean controls with stainless steel cleaners.

Condensation that flows back in may damage the appliance.

• The air extraction duct must be installed with a gradient of at least 1° from the appliance.

If you put incorrect stress on the design elements, they may break off.

• Do not pull design elements.
• Do not place objects on the design elements or hang objects from them.

Leaking batteries may damage the remote control.

• Remove the batteries if you are not using the remote control.
• Safely dispose of the empty or defective batteries in an environmentally friendly manner.

There is a risk of surface damage if you do not peel off the protective film.

• Remove the protective film from all parts of the appliance before using it for the first time.

Environmental protection and saving energy

Help protect the environment by using your appliance in a way that conserves resources and by disposing of reusable materials properly.

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

• Sort the individual components by type and dispose of them separately.
  Information about current disposal methods is available from your specialist dealer or local authority.

Saving energy
If you follow these instructions, your appliance will use less power.
Ensure that there is sufficient ventilation when cooking.

• The appliance works more efficiently and with fewer operating noises.

Adjust the fan speed to the amount of steam produced during cooking.

• The lower the fan speed, the less energy is consumed. Only use intensive mode when required.

If cooking produces large amounts of steam, select a higher fan speed in good time.

• The odors are distributed around the room less.

Switch the appliance off when you are not using it.

• The appliance does not consume any energy.

Switch off the lighting if you no longer require it.

• The lighting does not consume any energy.

Clean or replace the filters at regular intervals.

• The effectiveness of the appliance is increased.

Put the cooking lid on.

• The cooking vapors and condensation are reduced.

Operating modes

Air recirculation mode
The air which is drawn in is cleaned by the grease filters and an odor filter and conveyed back into the room.
To bind odors in circulating-air mode, you must install an odor filter. The different options for operating the appliance in circulating-air mode can be found in our catalog. Alternatively, ask your dealer. The required accessories are available from specialist retailers, from customer service, or from the Online Shop.

Familiarising yourself with your appliance

Controls
Use the remote control to set all of the functions of your appliance.
Tip: Align the remote control as precisely as possible to the infrared receiver for the LED display.

LED display

Die LED-Anzeige zeigt eingestellte Werte und Funktionen.

1. Fan setting 1/grease filter saturation display
2. Fan setting 2/odour filter saturation indicator
3. Fan setting 3
4. Intensive mode 1
5. Intensive mode 2
6. Automatic mode1/fan run-on time/interval ventilation Home Connect
7. Infrared receiver
   1Depending on the appliance specifications

Before using it for the first time

Configure the settings for the initial start-up. Clean the appliance and accessories.

Accessories

You can buy accessories from the after-sales service, from specialist retailers, or online. Only use original accessories, as these have been specifically designed for your appliance.
Accessories vary from one appliance to another.
When purchasing accessories, always quote the exact product number (E no.) of your appliance. → Page 14 You can find out which accessories are available for your appliance in our catalog, in the online shop, or from our after-sales service.
www.bosch-home.com

Basic operation

Switching on the appliance
Requirement: Align the remote control as precisely as possible to the infrared receiver for the LED display.

• Press to switch on the appliance.
• The appliance starts at fan setting 2.
• The LED for the set fan setting lights up in the LED display.

Switching off the appliance

Switch the appliance off when you are not using it.

• Press⁠.
• The fan run-on is switched on and LED 6 flashes in the LED display for the fan run-on.
• The fan automatically switches off after approx. 10 minutes.

Selecting a fan setting

• Press or
• The LED for the set fan setting lights up in the LED display.

Switching on the intensive mode

If particularly strong odors or vapors develop, you can use intensive mode.

•  so oft drücken, bis in der LED-Anzeige die LED 4 1.für die Intensivstufe 1 leuchtet.
• so oft drücken, bis in der LED-Anzeige die LED 52. für die Intensivstufe 2 leuchtet.
• After approx. 6 minutes, the appliance automatically switches to fan setting 3.

Switching off intensive mode

• To select a fan setting of your choice, press.
• After approx. 6 minutes, the appliance automatically switches to fan setting 3.

Switching on the fan run-on

During the fan run-on, the appliance continues to run for a short time and then switches off automatically. The fan run-on removes remaining odors and is used to dry the odor filter after the cooking process.

• Press⁠.
• LED 1 for the fan setting lights up in the LED display. LED 6 flashes for the fan run-on.
• The appliance switches off automatically after approx. 10 minutes.

Switching off the fan run-on

• Press⁠.
• This immediately stops the fan run-on.
• The appliance switches to the fan setting that was previously selected.

Switch on automatic mode

The optimum fan setting is set automatically using a sensor.

• Press⁠.
• In the LED display, LED 6 lights up for automatic mode.

Switch off automatic mode

• Press⁠.
• The appliance switches to the fan setting that was previously set.
• The ventilation is automatically ended when the sensor detects no further change in the room air quality.
• Automatic mode runs for a maximum of four hours.

Intermittent ventilation

With interval ventilation, the ventilation system switches on and off in the selected setting for the selected time.
Note: This function is only available via a mobile device with the Home Connect app.
If the interval ventilation is switched on, LED 6 continuously flashes in the LED display for the interval ventilation and the LED for the selected fan setting lights up. As soon as the ventilation time ends, the LED for the fan setting you have selected goes out. LED 6 continues to flash.

Sensor control

In automatic mode, a sensor in the appliance detects the intensity of the cooking and roasting fumes. Depending on the setting of the sensor sensitivity, the optimum fan setting is automatically switched on.
If the sensor control system reacts too weakly or too strongly, the setting for the sensor sensitivity may change.

• Default setting: Fan setting 3
• Lowest setting: Fan setting 1
• Highest setting: Fan setting 5

Setting the sensor control

Requirement: The appliance is switched off.

1. Press and hold and for approx. three seconds.
2. Press or change the setting. To cancel the setting, press⁠.
3. To save the setting, press and hold, and for approx. three seconds.
   Or wait approx. 10 seconds until the setting is saved automatically.
   • A signal tone sounds as soon as the selected setting is saved.

Resetting the saturation indicator

After cleaning the grease filter or after changing the odor filter, the saturation indicator can be reset.
Requirements

• After the appliance has been switched off, LED 1flashes in the LED display for the grease filter saturation display, and/or LED 2 flashes for the saturation indicator for the odor filter.
• A repeated signal tone sounds.
• Press.
• The saturation indicator is reset.

Setting the saturation indicator

The saturation indicator must be adjusted depending on the filter used.
Requirement: The appliance is switched off.

• Press and hold and for approx. three seconds.
  ‒ To set circulating-air mode (non-regenerable filter), press ⁠/until LED 2 lights up in the display.
  ‒To set circulating-air mode (non-regenerable filter), press⁠/until LED 3 lights up in the display.
  ‒To convert the electronic control back to operation without the air recirculation filter, press⁠/until LED 1 lights up on the LED display.
• To save the setting, press and hold and for ap-prox. three seconds.
  Or wait approx. 10 seconds until the setting is saved automatically.
  To cancel the setting, press ⁠.
  • A signal tone sounds as soon as the selected setting is saved.

Switching on the lighting

Press to switch on the lighting.
Note: Colour temperature settings are available in the Home Connect app provided the appliance has this function.

Setting the brightness

Press and hold or ⁠.
Note: Colour temperature settings are available in the Home Connect app provided the appliance has this function.

Switching on the button tone

The button tones can be switched on.
Requirement: The appliance is switched off.

1. Press and hold and for approx. three seconds.
   In the LED display, the LED for the setting that is currently selected lights up.
2. Press or until LED 1 lights up in the LED display.
   To cancel the setting, press⁠.
3. To save the setting, press and hold and for approx. three seconds.
   Or wait approx. 10 seconds until the setting is saved automatically.
   A signal tone sounds as soon as the selected setting is saved.

Switching the button tone off

The button tones can be switched off.
Note: Signal tones for the appliance are always switched on and cannot be switched off. Requirement: The appliance is switched off.

1. Press and hold and for approx. three seconds.
   In the LED display, the LED for the setting that is currently selected lights up.
2. Press or until LED 2 lights up in the LED display.
   To cancel the setting, press⁠.
3. To save the setting, press and hold, and for approx. three seconds.
   Or wait approx. 10 seconds until the setting is saved automatically.
   A signal tone sounds as soon as the selected setting is saved.

Home Connect

This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status. Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home-connect.com. To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi ) and to the Home Connect app.

• Automatically connecting the appliance to the WLAN home network (Wi-Fi) → Page 9
• Connecting appliance to WLAN home network (WiFi) manually → Page 9

The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings. If the appliance is not connected to your home network, it functions as an appliance with no network connection and can still be operated via the display. 1

Tips

• Please consult the documents supplied by Home Connect.
• Please also follow the instructions in the Home Connect app.

Notes

• Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Connect app. →  Safety”, Page 2
• Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app.
• In networked standby mode, the appliance requires a maximum of 2 W.
• If you need your device’s MAC address to connect to your home network, you can find this next to the rating plate. → Page 11.

Automatically connecting the appliance to the WLAN home network (Wi-Fi)
If your router has a WPS function, you can connect the appliance to your WLAN home network (Wi-Fi) automatically.
Note: The appliance cannot be switched on during the connection process. Press to cancel the process.

Requirements

• Wi-Fi on the router is activated.
• The appliance receives signals from the WLAN home network (Wi-Fi) at its installation location.
• The Home Connect app is installed on your mobile device.
• The appliance and the light are switched off.

1. Press and hold the button until LED 7 flashes in the LED display.
2. Press.
   LED 1 and LED 7 flash in the LED display.
3. Press the WPS button on the router within the next 2 minutes.
   If the connection has been established, the appliance automatically connects to the
   Home Connect app. LED 3 and LED 7 flash in the LED display.
4. If no connection can be established, the appliance automatically switches to the manual connection to the home network, LED 2 and LED 7 flash in the LED display. Log the appliance manually into the home network or press in order to restart the lo- gin.
5. On your mobile device, follow the instructions for automatic network login.
   The login process is complete when LED 7 stops flashing and remains continuously lit.

Manually connecting the appliance to the WLAN home network (Wi-Fi)

Note: The appliance cannot be switched on during the connection process. Press to cancel the process.
Requirement: The appliance and the light are switched off.

1. Press and hold the button until LED 7 flashes in the LED display.
2. Press twice to start logging into your home network manually.
   LED 2 and LED 7 flash in the LED display.
3. Follow the instructions in the app.
   If the connection has been established, the appliance automatically connects to the Home Connect app. LED 3 and LED 7 light up in the LED display.
4. On your mobile device, follow the instructions for manually logging into your network.
   The login process is complete when LED 7 stops flashing and remains continuously lit.

Connecting the appliance to the Home Connect app

Requirements

• The Home Connect app is installed on your mobile device.
• The Home Connect app is opened.

1. Press and hold the button until LED 3 and LED 7 flash in the LED display.
2. Follow the instructions for the Home Connect app on the mobile device.
   The login process is complete when LED 7 stops flashing and remains continuously lit.

Home Connect settings

Adapt Home Connect to your needs.
You can find the Home Connect settings in the basic settings for your appliance. Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance is connected to your home network.

Software update

Your appliance’s software can be updated using the software update function, e.g. for the purposes of optimisation, troubleshooting, or security updates. To do this, you must be a registered Home Connect user, have installed the app on your mobile device, and be connected to the Home Connect server. As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are in your local area network. The Home Connect app will inform you once the installation is successful.

Notes

• You can continue to use your appliance as normal while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically.
• We recommend that you install security updates as soon as possible.

Resetting the connection

Saved connections to the home network and to Home Connect can be reset.

• Press and hold until LED 7 goes out in the LED display.
• An audible signal sounds.

Remote diagnostics

Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server, and if Remote diagnostics is available in the country in which you are using the appliance.
Tip: For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website:
www.home-connect.com

Data protection

Please see the information on data protection.
The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration):

• Unique appliance identification (consisting of appliance codes as well as the MAC address of the Wi-Fi communication module installed).
• Security certificate of the Wi-Fi communication module (to ensure a secure data connection).
• The current software and hardware version of your appliance.
• Status of any previous reset to factory settings.

This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time.
Note: Please note that the Home Connect functions can only be utilized with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

Hob-based hood control

You can connect your appliance to a suitable hob and, in this way, control the functions of your appliance via the hob.
You have the following options for connecting the appliances with each other:

• Connecting the appliance via the Home Connect app. If both appliances are Home Connect-compatible, they can be connected using the Home Connect app. Follow the instructions in the app.
• Connecting appliances directly with each other.
• Connecting appliances via the Wi-Fi home network.

Note: Please note the safety precautions in the instruction manual for your appliance and ensure that they are also observed when operating the appliance via the hob-based hood control.
Tip: Operating your appliance always takes priority. It is not possible to use the hood controls on the hob during this time.

Connecting directly

Requirements

• Your appliance is now switched off.
• Before connecting the appliances, reset all connections to your home network or other appliances. If your appliance is connected directly to the hob, it cannot be connected to your home network as well and you will not be able to use Home Connect.

1. Note: Refer to the section entitled “Hob-based hood control” in the instruction manual for your hob. Switch on the hob and select the search mode.
2. Press and hold the button until the LED for Home Connect flashes in the LED display.
   The appliance is connected to the hob if the LED for Home Connect no longer flashes and lights up permanently.

Connecting via your home network

1. Follow the instructions in → “Automatically connecting the appliance to the WLAN home network (Wi-Fi)”, Page 9 or → “Manually connecting the appliance to the WLAN home network (Wi-Fi)”, Page 9.
2. As soon as the appliance is connected to the home network, establish the connection to the hob via the Home Connect app.
3. Follow the instructions on your mobile device.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.

Cleaning products

You can obtain suitable cleaning products from the aftersales service or the online shop.
WARNING ‒ Risk of electric shock!
Ingress of moisture can cause an electric shock.

• Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.
• Do not use steam- or high-pressure cleaners to clean the appliance.

WARNING ‒ Risk of burns!
The appliance will become hot during operation.

• Allow the appliance to cool down before cleaning it.

ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.

• Do not use harsh or abrasive detergents.
• Do not use cleaning products with high alcohol content.
• Do not use hard scouring pads or cleaning sponges.
• Do not use any special cleaners for cleaning the appliance while it is hot.
• Only use glass cleaners, glass scrapers, or stainless steel care products if recommended in the cleaning instructions for the relevant part.
• Wash sponge cloths thoroughly before use.

Cleaning the stainless steel surfaces

1. Observe the information regarding the cleaning agents.→ “Cleaning products”, Page 11
2. Clean using a sponge cloth and hot soapy water in the direction of the finish.
3. Dry with a soft cloth.
4. Apply a thin layer of the stainless steel cleaning product with a soft cloth.

Tip: You can obtain stainless steel cleaning products from after-sales service or the online shop.

Cleaning painted surfaces

1. Observe the information regarding the cleaning agents. → “Cleaning products”, Page 11
2. Clean using a sponge cloth and hot soapy water in the direction of the finish.
3. Dry with a soft cloth.

Cleaning aluminum

1. Observe the information regarding the cleaning agents. → “Cleaning products”, Page 11
2. Clean with a soft cloth and glass cleaner.

Cleaning plastic

1. Observe the information regarding the cleaning agents. → “Cleaning products”, Page 11
2. Clean with a soft cloth and glass cleaner.

Cleaning glass

1. Observe the information regarding the cleaning agents. → “Cleaning products”, Page 11
2. Clean with a soft cloth and glass cleaner.

Cleaning controls

WARNING ‒ Risk of electric shock!
Penetrating moisture may cause an electric shock.

• Do not use wet sponge cloths.

1. Observe the information regarding the cleaning agents. → “Cleaning products”, Page 11
2. Clean using a damp sponge cloth and hot soapy water.
3. Dry with a soft cloth.

Removing the grease filter

WARNING ‒ Risk of injury!
The filter cover may swing-out.

• Open the filter cover slowly.
• Take hold of the filter cover after opening it until it no longer swings out.
• Close the filter cover slowly.

Risk of falling when working on the appliance

• Use a stable stepladder.
• Do not lean over the hob.
• Do not step on the hob or the work surface.

1. Press the lock on the filter cover.
   To prevent the filter cover from swinging down suddenly, hold onto the filter cover firmly with two hands.
2. Open the filter cover by pulling it downwards.
   
3. ATTENTION!
   Falling grease filters may damage the hob below.
   • Grip below the grease filter with one hand.
   Open the locks on the grease filters.
   
4. Remove the grease filters from the holders.
   To prevent grease from dripping, hold the grease filter horizontally.

Cleaning grease filters in the dishwasher

The grease filters filter the grease from the cooking vapor. Regularly cleaned grease filters guarantee a high level of grease removal.
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.

• Clean the grease filters regularly.

ATTENTION!
The grease filters may become damaged if they are squeezed.

• Do not squeeze the grease filters.

Note: When cleaning the grease filter in the dishwasher, slight discoloration may occur. This discoloration has no effect on the performance of the metal grease filters.
Requirement: The grease filters have been removed.

1. Observe the information regarding the cleaning agents. → “Cleaning products”, Page 11
2. Place the grease filters loosely into the dishwasher.
   Do not clean heavily soiled grease filters with utensils.
   Use special grease solvent for stubborn dirt. You can obtain grease solvents from after-sales service or the online shop.
3. Start the dishwasher.
   Select a temperature of no more than 70 °C.
4. Allow the grease filters to drain.

Cleaning grease filters manually

The grease filters filter the grease from the cooking vapor. Regularly cleaned grease filters guarantee a high level of grease removal.
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.

• Clean the grease filters regularly.

Requirement: The grease filters have been removed.

1. Observe the information regarding the cleaning agents. → “Cleaning products”, Page 11
2. Soak the grease filter in hot soapy water.
   Use special grease solvent for stubborn dirt. You can obtain grease solvents from after-sales service or the online shop.
3. Use a brush to clean the grease filters.
4. Rinse the grease filters thoroughly.
5. Allow the grease filters to drain.

Fitting grease filters

ATTENTION!
Falling grease filters may damage the hob below.

• Grip below the grease filter with one hand.

1. Fit the grease filters.
2. Fold the grease filters upwards and engage the locks.
3. Make sure that the locks engage.
4. Close the filter cover.
5. Make sure that the filter cover locks engage correctly.

Odor filter for recirculating air mode

You can obtain odor filters from the after-sales service or the online shop. Only use original odor filters. → “Accessories”, Page 6
Replacing the odor filter
Requirement: The grease filters have been removed.

1. Open the odor filter cartridge.
   
2. Remove the odor filter.
3. Remove the new odor filter from the packaging.
4. Insert the odor filter.
   Insert the odor filter in the correct direction.
5. Close the odor filter cartridge.
6. → “Fitting grease filters”, Page 12.

Replacing the batteries in the remote control

WARNING ‒ Risk of injury!
Children may swallow batteries.

• Keep batteries out of the reach of children.
• Keep an eye on any children when you are replacing batteries.

Batteries may explode.

• Do not charge the batteries.
• Do not short-circuit the batteries.
• Do not throw batteries into a fire.

ATTENTION!
Improper handling of batteries.

• Do not short-circuit the terminals.
• Use the specified type of batteries only.
• Do not use different battery types together.
• Do not use new and used batteries together.
• Do not use rechargeable batteries.

Leaking batteries may damage the remote control.

• Remove the batteries if you are not using the remote control.
• Safely dispose of the empty or defective batteries in an environmentally friendly manner.

1. Remove the cover.
2. Remove the empty batteries.
   
3. Insert the new batteries (3 V CR 2032).
   
4. Close the cover.
5. Dispose of the empty batteries in an environmentally friendly manner.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting the aftersales service. This will avoid unnecessary costs.

WARNING ‒ Risk of injury!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• If the appliance is defective, call Customer Service.

WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.

Malfunctions

Customer Service

If you have any queries on use, are unable to rectify faults on the appliance yourself or if your appliance needs to be repaired, contact Customer Service. Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of the warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
This product contains light sources from energy efficiency class G. These light sources are available as a spare part and should only be replaced by trained specialist staff.

Product number (E-Nr.) and production number (FD)

You can find the product number (E-Nr.) and the production number (FD) on the appliance’s rating plate.
Depending on the model, the rating plate can be found:

• Inside the appliance (remove grease filters for access).
• On top of the appliance.

Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Disposal

Find out here how to dispose of old appliances correctly.

Disposing of old appliances

Valuable raw materials can be reused by recycling.

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner.

This appliance is labeled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Disposing of batteries

Batteries should be recycled in an environmentally friendly manner. Do not dispose of the batteries in the household rubbish.

• Dispose of batteries in an environmentally friendly manner.
  Only for EU countries:

According to the European Guideline 2006/66/EC, defective or used battery packs/batteries must be collected separately and disposed of in an environmentally correct manner.

Declaration of Conformity

Robert Bosch Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the basic requirements and other relevant provisions of Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found online at www.bosch-home.com among the additional documents on the product page for your appliance.
Hereby, Robert Bosch Hausgeräte GmbH declares that the appliance with Home Connect functionality is in compliance with relevant statutory requirements. A detailed Declaration of Conformity can be found online at www.bosch-home.co.uk among the additional documents on the product page for your appliance.

2.4 GHz band (2400–2483.5 MHz): Max. 100 mW 5 GHz band (5150–5350 MHz + 5470–5725 MHz): Max. 100 mW

Installation instructions

Observe this information when installing the appliance.

Included with the appliance
After unpacking all parts, check for any damage in transit and the completeness of the delivery.

Safety clearances

Comply with the safety clearances for the appliance.

Dimensions

You will find the dimensions of the appliance here

Secure installation
Follow these safety instructions when installing the appliance.
WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

• Keep packaging material away from children.
• Do not let children play with packaging material.

WARNING ‒ Risk of fire!
Grease deposits in the grease filter may catch fire.

• The specified safety clearances must be complied with in order to prevent a build-up of heat.
• Observe the specifications for your cooking appliances. If the installation instructions for the cooking appliances specify a different clearance, the larger of the two must always be provided for. If gas hobs and electric hobs are operated together, the largest specified clearance applies.

Grease deposits in the grease filter may catch fire.

• Never work with naked flames close to the appliance (e.g. flambéing).
• Do not install the appliance near a heat-producing appliance for solid fuel (e.g.wood or coal) unless a closed, non-removable cover is available. There must be no flying sparks.

WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.

• Wear protective gloves.

The appliance may fall down if it has not been properly fastened in place.

• All fastening components must be fixed firmly and securely in place.

The appliance is heavy.

• To move the appliance, two people are required.
• Use only suitable tools and equipment.

The appliance is heavy.

• The appliance must not be fitted directly onto plasterboard or similar lightweight materials.
• To ensure correct installation, you must use a material that is sufficiently stable and suitable for both the structural conditions and the weight of the appliance.

Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.

• Do not make any changes to the electrical or mechanical assembly.

Risk of falling when working on the appliance

• Use a stable stepladder.
• Do not lean over the hob.
• Do not step on the hob or the work surface.

The filter cover may swing-out.

• Open the filter cover slowly.
• Take hold of the filter cover after opening it until it no longer swings out.
• Close the filter cover slowly.

Risk of injury when opening and closing the hinges.

• Keep your hands away from the hinges.

WARNING ‒ Risk of electric shock!
Sharp-edged components inside the appliance may damage the connecting cable.

• Do not kink or trap the connecting cable.
  If the appliance or the power cord is damaged, this is dangerous.
• Never operate a damaged appliance.
• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
• If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
• Call customer services. → Page 14 Incorrect repairs are dangerous.
• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.

Improper installation is dangerous.

• Connect and operate the appliance only in accordance with the specifications on the rating plate.
• Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
• The protective conductor system of the domestic electrical installation must be properly installed.
• Never equip the appliance with an external switching device, e.g. a timer or remote control.
• When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the conditions of Overvoltage Category III and according to the installation regulations.
• When installing the appliance, check that the power cable is not trapped or damaged.

Information on the installation situation

• Install this appliance on the kitchen ceiling or a stable suspended ceiling.
• To install additional special accessory parts, observe the enclosed installation instructions.
• The appliance finds it more difficult to draw in the cooking vapors the further away they are from the hotplate. For optimum performance, a maximum distance of 1500 mm is recommended.
• The width of the extractor hood must correspond at least with the width of the hob.
• To optimally detect the cooking vapors, install the appliance in the middle of the hob.

Instructions for the electrical connection

In order to be able to safely connect the appliance to the electrical system, follow these instructions.