Philips LEDtube 1500mm UO 21.7W 865 T8 User Guide
LEDtube 1500mm UO 21.7W 865 T8
User Guide
Packing list Philips LEDtube: I0 pcs EMP (to replace starter): available as accessories
| SYMBOL | MEANING |
| DO NOT USE WITH DIMMERS | |
| LAMP SUITABLE FOR S0Hz OR 60 Hz OPERATION | |
| NEED TO BE USED WITH AN LED REPLACEMENT STARTER EMP | |
| NEED TO BE USED IN DRY CONDITIONS OR IN A LUMINAIRE THAT PROVIDES PROTECTION |
THIS LAMP IS NOT SUITABLE TO BE USED IN EMERGENCY LUMINAIRES DESIGNED FOR DOUBLE-CAPPED FLUORESCENT LAMP(S)
- No modifications to the luminaire which the LED lamp is to be used with care to be made
- This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used. The temperature range of this lamp is more restricted. In cases of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted
- This lamp is designed for general lighting service(excluding e.g.explosive atmospheres)
- In this application, an LED replacement starter is not used.
- Always switch off the power supply before commencing work!
- Philips LED tube should be installed by qualified professionals in accordance with the relevant code.|
- Stick the Warning Sticker on the luminaire after the modifications have been made.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable, and may be changed without notice. No liability will be accepted by the publisher for any consequence of its te Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.
06/2019