Mitsubishi Electric MSZ-FS Remote Control User Guide
MITSUBISHI ELECTRIC MSZ-FS Remote Control
© 2020 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Mitsubishi Electric, Lossnay, and the three-diamond logo are trademarks of Mitsubishi Electric Corporation. CITY MULTI, kumo cloud, kumo station and H2i are registered trademarks of Mitsubishi Electric US, Inc. Trane and American Standard are registered trademarks of Trane Technologies plc. All other product names mentioned herein are trademarks or registered trademarks of their respective owners.
ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the United States Environmental Protection Agency.
Use of the AHRI Certified® mark indicates a manufacturer’s participation in the certification program. For verification of certification for individual products, go to www.ahridirectory.org
Specifications shown in this brochure are subject to change without notice. See complete warranty for terms, conditions and limitations. A copy is available from Mitsubishi Electric Trane HVAC US LLC.
Before operation: setting the current time
- Press the CLOCK button
- Press the TIME button to set the time
- Press the DAY button to set the day
- Press the CLOCK button again
3D i-see Sensor®
Sensor: The sensor detects the room temperature.
Absence Detection: When no one is in the room, the unit automatically switches to Energy-saving mode.
Indirect/Direct: Press to activate INDIRECT/DIRECT mode. This mode is only available when the i-see control mode is effective.
The 3D i-see Sensor detects the location of occupants in the room. Direct mode aims airflow toward individuals in the space while Indirect mode diverts air away from room occupants.
NOTE: In the case of systems with multiple units (multi-systems), it is not possible to set different operation modes for each unit. In some cases, it may not be possible to use certain functions.
