Sony ECM-W2BT Wireless Microphone User Guide

SONY ECM-W2BT Wireless Microphone User Guide

About the manual for this product

For details on using the product, refer to the “Help Guide” (web manual).
“Help Guide” (Web manual) https://rd1.sony.net/help/ilc/2080/h_zz/

Notes on use

unit”) is compatible with a camera that has a Multi Interface Shoe such as a Sony Interchangeable Lens Digital Camera (referred to below as “camera”).

Even if your camera has a Multi Interface Shoe, you may be unable to use it with this unit or some functions may not work.

  • This unit uses Bluetooth wireless communication technology.
  • See the operating instructions of this unit and refer to the operating instructions of your camera.
  • For camera models compatible with this unit, visit the website at: https://www.sony.net/dics/w2bt/
  • To avoid the risk of a fire or an electric shock, observe the following:
    • Do not disassemble or alter this unit.
    • Do not use this unit with wet hands.
    • Do not allow ingress of water or foreign matters (metal, flammable substances, etc.) to this unit.
    • Do not use this unit in a place subject to water splashes, high humidity, dust, oil fumes, and steam.
  • To avoid the risk of damage or a malfunction, observe the following:
    • This unit is precision equipment. Do not drop the unit, hit it, or subject it to a strong physical impact.
    • Do not touch the electrical contacts on this unit with bare hands.
    • Do not use or store this unit in a place subject to high temperatures and humidity.
  • For interior inspection and repair of this unit, contact your Sony dealer or local authorized Sony service facility.
  • Handle this unit with care to avoid the risk of dropping it or letting it exposed to liquid.
  • This unit is designed to be dust and moisture-resistant, but is not waterproof or splash-proof. When you use the unit in rainy conditions, do not let the unit get wet.
  • To use the built-in flash of the camera, remove the receiver of this unit from the camera.
  • The nameplate is under the clip of the microphone.
  • While recording is in progress, operation and handling noises of a camera or a lens may be recorded. Touching this unit while recording is in progress causes a noise to be included in the recording.
  • Do not use this unit while driving a vehicle.
    While driving a vehicle, such as a car or a motorcycle, do not use headphones, earphones, or the like, nor do you perform fine operations to avoid a traffic accident. In addition, when you use this unit while walking, always pay attention to the surrounding traffic and the road surface conditions to avoid an accident.

Identifying the parts

Receiver

  1. Slide switch (MIC OUT ANALOG/Power OFF/DIGITAL)
  2. Mode switch (RCVR/MIX/MIC)
  3. Multi Interface foot
  4. Power lamp (Green: Powered, Orange: Charging the battery)
  5. LINK lamp
  6. Internal microphone
  7. Micro USB terminal
  8. Microphone out jack
  9. Connector protect holder
    Microphone
  10. LINK lamp
  11. Power lamp (Green: Powered, Orange: Charging the battery)
  12. Internal microphone
  13. External microphone input jack
  14. Power switch
  15. ATT switch
  16. Micro USB terminal
  17. Clip
  18. Wind screen

Specifications

Wireless communication

  • Communication system Bluetooth specification Ver. 5.0
  • Output Bluetooth specification Power Class 1
  • Main compatible: Advanced Audio Distribution Profile
  • Bluetooth Profile
  • Working range* Up to 200 m (600 ft.)

* This is the approximate communication distance when the microphone is upright and directly facing the receiver. Depending on recording location, such as if obstacles or reflective surfaces are between Bluetooth devices, radio wave conditions, etc.

Receiver

  • Microphone system: Monaural, non-directional
  • Dimensions (Approx.): 34 mm × 28.7 mm × 53 mm (1 3/8 in. × 1 3/16 in. × 2 1/8 in.) (W/H/D)
  • Mass (Approx.): 28 g (1.0 oz.)

Microphone (transmitter)

Microphone system Monaural, non-directional Dimensions(Approx.) 30.6 mm × 67.6 mm × 19 mm (1 1/4 in. × 2 3/4 in. × 3/4 in.) (W/H/D)
Mass (Approx.) 27 g (1.0 oz.)

Included items

Receiver (ECM-W2BT(R)) (1), Microphone (transmitter) (ECM-W2BT(T)) (1), Wind screen (1), Pouch (1), Recording cable (1), Micro USB cable (1), Connector protect holder (1), Set of printed documentation

Design and specifications are subject to change without notice.

  • The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.
  • “Multi Interface Shoe” is a trademark of Sony Corporation.

For Customers in the U.S.A.

For question regarding your product or for the Sony Service
Center nearest you,
call 1-800-222-SONY (7669) .

Supplier’s Declaration of Conformity

Trade Name : SONY
Model : ECM-W2BT(T)/ ECM-W2BT(R)
Responsible Party : Sony Electronics Inc.
Address : 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number : 858-942-2230

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

© 2021 Sony Corporation
Printed in China
https://www.sony.net/