Panasonic AT2105 Car Navigation User Manual
User Manual
Audio Section/Radio Section
Operating Function | Button No. /Name | Performing Specifications |
Transition to the radio mode | (Softkey) AM,FM | ①Select Audio icon ( |
Reading/writing of the preset memory. | (Softkey) Favorite | In FM/AM mode, by pressing the “Heart mark” in the top-right of the screen, you can set/remove arbitrary frequency to/from preset memory. |
USB Section
Operating Function | Button No./Name | Performing Specifications |
Transition to the USB mode | (Softkey) USB | ①Select Audio icon ( |
Playback / Pause | (softkey) |
If If |
iPod Section
Operating Function | Button No./Name | Performing Specifications |
Transition to the iPod mode | (Softkey) iPod | ①Select Audio icon ( |
Playback / Pause | (softkey) |
If If |
Bluetooth Section/Registration method of Bluetooth device
Operation Method | Screen Display Specifications |
①Touch Gear icon ( ②Touch “Bluetooth & devices” in the menu. |
|
③Touch “Manage devices”, then touch “Search devices” in the bottom-right of the screen. Meantime, set the smartphone to waiting for a BT connection. | |
④You can see the available devices list in the bottom-right of the window, then select the device that you want to connect. | |
⑤You may see passcode on both H/U and smartphone. Then Approve both. | |
⑥BT paring established successfully. You may need to approve on a smartphone to transfer the phonebook. |
*Cold start erase all BT paring.
Handsfree Section
Operating Function | Button No./Name | Performing Specifications |
Transition to the telephone menu screen | (softkey) Phone | ①Select Phone icon ( ②Select the function you want to use from the phone menu. |
Outgoing | (softkey) Keypad | Select “Keypad” from the phone menu to go to the dial screen. Push the numeric button to enter a phone number, push ( |
Audio Setup Section
Operating Function | Button No./Name | Performing Specifications |
Transition to the audio setup adjustment screen | (Softkey) Sound | ①Select Setting( ②Select “Sound & Media” from the Settings menu. ③Select “Sound tuning” from “Sound & Media”. |
Bass/Mid/Treble, | (softkey) Bass/Mid/Treble | To Adjust Treble/Mid/Bass, drag the slider to the left (low) or right (high). |
Balance/Fader | (softkey) Balance/Fader | To Adjust Balance/Fader, drag the pointer or press adjust button. |
Navigation Section
Location
A vehicle location is displayed by GPS, and a direction is detected with a gyroscope.
Since this device is always used with vehicles, it is not sold to general end users separately. Therefore there is no user manual for this device by alone.
The following statements must be described on the user manual of the vehicle;
[For FCC]
FCC ID : ACJ932AT2105
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiofrequency radiation exposure information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
IC: 216J-AT2105
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from the person’s body.