Sony ECM-77BMP Discrete Omni-Directional Lavalier Electret Condenser Microphone User Manual
ECM-77BMP
Discrete Omni-directional
lavalier Electret condenser
microphone
Overview
The ECM-77 is used widely in both studio production and on location. Its popularity is based on a combination of excellent sound quality, robust construction, and an attractive cosmetic design. This microphone is the ECM77BMP which is supplied with a 3.5 mm locking jack for use with UWP-D series wireless transmitters.
Hands-Free
As a lavalier microphone, the ECM-77 is an alternative to the traditional handheld microphone, and being ‘hands-free’ it allows the presenter to concentrate on her/his performance.
Professional Image
The ECM-77 is probably the most seen microphone on TV and its compact design creates a professional image.
Easy and Familiar Operation
The ECM-77 is an essential tool for achieving good quality voice recording. The microphone’s capsule is designed for voice pick-up with an extended frequency response and impressive sensitivity. The popularity of the microphone in TV production means that most sound people will be familiar with using the ECM-77.
© 2004 – 2022 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. The values for mass and dimension are approximate. All trademarks are the property of their respective owners.
Features
Designed for high-quality voice pick-up The ECM-77’s capsule features a voice emphasis curve, extended frequency response and sensitivity. Designed for high-quality voice pick-up
Minute size
The capsule has a diameter of only 5.6mm and is 12.5mm long.
Ready for wireless systems
The ECM-77BMP is compatible with UWP-D wireless transmitters, providing high-quality wireless microphone systems for video production.
Specifications
Audio Section
Capsule Type Electret Condenser | |
Frequency Response |
40 Hz to 20 kHz |
Directivity | Omni-directional |
Sensitivity *[1] | -39.0 dB (11.2 mV) |
Output Impedance *[2] |
2.5k0+30%, Unbalanced |
Dynamic Range | 90 dB or more |
Signal-to-Noise Ratio *[3] |
64 dB or more |
Inherent Noise *[4] | 30 dB SPL or less |
Induction Noise From External Magnetic Field *[5] |
5 dB SPL or less |
Wind Noise *[6] | 40 dB SPL or less (with windscreen) |
Maximum Input Sound Pressure Level *[7] |
120 dB SPL |
General Section
Connector | BMP type. Supplied with o3.5 mm, 3-pole mini plug. |
Mic Cable | 3.9 feet 1.2 m |
Power Requirements | DC 1.1 V to 10.0V |
Power Consumption | 0.4 mA or less |
Dimensions *[8] | φ5.6 X 12.5 mm (Mic head) φ1/4 X 1/2 inches (Mic head) |
Mass | Approx. 22.7 g Approx. 0.8 oz |
Supplied Accessories | Single/horizontal type tie clip (1) Metal-mesh type windscreen (1) |
Optional Accessories | Windscreen pack Vertical clip pack Safety pin type clip pack Horizontal double-clip pack Horizontal single-clip pack ECM-77 accessory kit |
Colored windscreen kit Black windscreen for ECM-77
Notes
- [1] 0 dB = 1 V/Pa, at 1 kHz
- [2] Output impedance at 1 kHz
- [3] A-weighted, 1 kHz, 1 Pa.
- [4] 0dB SPL = 20 μPa
- [5] dB SPL/1E-7 T, 0 dB SPL = 20 μPa
Note - [6] Wind noise at 2m/s (0 dB SPL = 20 μPa)
- [7] 0 dB SPL = 20 μPa
- [8] The values for dimensions are approximate.
Related products
UWP-D11
UWP-D bodypack wireless microphone package
UWP-D12
UWP-D handheld wireless microphone package
UWP-D16
UWP-D bodypack and XLR plug-on wireless microphone package
Gallery