Beko BSVOA 090 Split Type Room Air Conditioner User Manual

beko BSVOA 090 Split Type Room Air Conditioner

Safety Precautions

Read Safety Precautions Before Installation

Incorrect installation due to ignoring instructions can cause serious damage or injury. The seriousness of potential damage or injuries is classified as either a WARNING or CAUTION.

This symbol indicates that ignoring instructions may cause death or serious injury.

This symbol indicates that ignoring instructions may cause moderate injury to your person or damage to your appliance or other property.

WARNING

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

INSTALLATION WARNINGS

Ask an authorized dealer to install this air conditioner. Inappropriate installation may cause water leakage, electric shock, or fire.

• All repairs, maintenance, and relocation of this unit must be performed by an authorized service
  technician. Inappropriate repairs can lead to serious injury or product failure.

WARNINGS FOR PRODUCT USE

• If an abnormal situation arises (like a burning smell), immediately turn off the unit and pull the power plug. Call your dealer for instructions to avoid electric shock, fire or injury.
• Do not insert fingers, rods or other objects into the air inlet or outlet. This may cause injury, since the fan may be rotating at high speeds.
• Do not use flammable sprays such as hair spray, lacquer, or paint near the unit. This may cause fire or combustion.
• Do not operate the air conditioner in places near or around combustible gases. Emitted gas may collect around the unit and cause an explosion.
• Do not operate the air conditioner in a wet room (e.g., bathroom or laundry room). This can cause electrical shock and cause the product to deteriorate.
• Do not expose your body directly to cool air for a prolonged period of time.

ELECTRICAL WARNINGS

• Only use the specified power cord. If the power cord is damaged, it must be replaced by the manufacturer or certified service agent.
• Keep the power plug clean. Remove any dust or grime that accumulates on or around the plug. Dirty plugs can cause fire or electric shock.
• Do not pull the power cord to unplug the unit. Hold the plug firmly and pull it from the outlet. Pulling directly on the cord can damage it, which can lead to fire or electric shock.
• Do not use an extension cord, manually extend the power cord, or connect other appliances to the same outlet as the air conditioner. Poor electrical connections, poor insulation, and insufficient voltage can cause fire.

CLEANING AND MAINTENANCE WARNINGS

• Turn off the device and pull the plug before cleaning. Failure to do so can cause electrical shock.
• Do not clean the air conditioner with excessive amounts of water.
• Do not clean the air conditioner with combustible cleaning agents. Combustible cleaning agents can cause fire or deformation.

CAUTION

• If the air conditioner is used together with burners or other heating devices, thoroughly ventilate the room to avoid oxygen deficiency.
• Turn off the air conditioner and unplug the unit if you are not going to use it for a long time.
• Turn off and unplug the unit during storms.
• Make sure that water condensation can drain unhindered from the unit.
• Do not operate the air conditioner with wet hands. This may cause electric shock.
• Do not use the device for any other purpose than its intended use.
• Do not climb onto or place objects on top of the outdoor unit.
  Do not allow the air conditioner to operate for long periods of time with doors or windows open, or if the humidity is very high.

Explanation of symbols displayed on the indoor unit or outdoor unit

Unit Specifications and Features 

Unit Parts

Achieving Optimal Performance

Optimal performance for the COOL and DRY modes can be achieved in the following temperature ranges. When your air conditioner is used outside of these ranges, certain safety protection features will activate and cause the unit to perform less than optimally.

Inverter Split Type

FOR OUTDOOR UNITS WITH AUXILIARY ELECTRIC HEATER

When the outside temperature is below 0°C (32°F ), we strongly recommend keeping the unit plugged in at all times to ensure smooth ongoing performance.

Fixed-speed Type

• Room Temperature
• 17°-32°C (63°-90°F)
• DRY Mood
• 10°-32°C (50°-90°F)
• Outdoor Temperature
• 18°-43°C (64°-109°F)
• DRY Mood
• 11°-43°C (52°-109°F)

To further optimize the performance of your unit, do the following

• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air filters.
• For a detailed explanation of each function, refer to the Remote Control Manual.

Other Features

Auto-Restart

If the unit loses power, it will automatically restart with the prior settings once power has been restored.

Anti-mildew (some units)

When turning off the unit from COOL, AUTO (COOL), or DRY modes, the air conditioner will continue operating at very low power to dry up condensed water and prevent mildew growth.

Wireless Control (some units)

• Wireless control allows you to control your air conditioner using your mobile phone and a wireless connection.
• For the USB device access, replacement, maintenance operations must be carried out by professional staff. Louver Angle Memory(some units)
• Louver Angle Memory(some units) When turning on your unit, the louver will automatically resume its former angle.
• Refrigerant Leakage Detection (some units) The indoor unit will automatically display “EC” when it detects refrigerant leakage.
• For a detailed explanation of your unit’s advanced functionality (such as TURBO mode and its self-cleaning functions), refer to the Remote Control Manual.

NOTE ON ILLUSTRATIONS

Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit may be slightly different. The actual shape shall prevail.

Setting Angle of Air Flow

Setting the vertical angle of airflow While the unit is on, use the SWING/DIRECT button to set the direction (vertical angle) of airflow.

1. Press the SWING/DIRECT button once to activate the louver. Each time you press the button, it will adjust the louver by 6°. Press the button until the direction you prefer is reached.
2. To make the louver swing up and down continuously, press and hold the SWING/DIRECT button for 3 seconds. Press it again to stop the automatic function.

Setting the horizontal angle of airflow

The horizontal angle of the airflow must be set manually. Grip the deflector rod (See Fig.B) and manually adjust it to your preferred direction. For some units, the horizontal angle of the airflow can be set by remote control. please refer to the Remote Control Manual.

NOTE ON LOUVER ANGLES

• When using the COOL or DRY mode, do not set the louver at too vertical an angle for long periods of time. This can cause water to condense on the louver blade, which will drop on your floor or furnishings.
• When using the COOL mode, setting the
• louver at too vertical an angle can reduce the performance of the unit due to restricted air flow.
• Do not move the louver by hand. This will cause the louver to become out of sync. If this occurs, turn off the unit and unplug it for a few seconds, then restart the unit. This will reset the louver.

ECO Operation

• The ECO function is used to decrease energy use while you ECO (and don’t need the same temperature settings to stay comfortable). This function can only be activated via remote control.
• Press the ECO button when you are ready to go to ECO. When in COOL mode, the unit will increase the temperature by 1°C (2°F) after 1 hour, and will increase an additional 1°C (2°F) after another hour.
• It will hold the new temperature for 5 hours, then the unit will turn off automatically.

Note: The ECO function is not available in FAN or DRY mode.

How to operate your unit without the remote control

In the event that your remote control fails to work, your unit can be operated manually with the MANUAL CONTROL button located on the indoor unit. Note that manual operation is not a long-term solution, and that operating the unit with your remote control is strongly recommended.

BEFORE MANUAL OPERATION

The unit must be turned off before manual operation.

To operate your unit manually

• Open the front panel of the indoor unit.
• Locate the MANUAL CONTROL button on the right-hand side of the unit.
• Press the MANUAL CONTROL button one time to activate the FORCED AUTO mode.
• Press the MANUAL CONTROL button again to activate the FORCED COOLING mode.
• Press the MANUAL CONTROL button a third time to turn the unit off.
• Close the front panel.

 

Care and Maintenance

Cleaning Your Indoor Unit

Only use a soft, dry cloth to wipe the unit clean. If the unit is especially dirty, you can use a cloth soaked in warm water to wipe it clean. Do not use chemicals or chemically treated cloths to clean the unit Do not use benzene, paint thinner, polishing powder or other solvents to clean the unit. They can cause the plastic surface to crack or deform. Do not use water hotter than 40°C (104°F) to clean the front panel. This can cause the panel to deform or become discolored.

Cleaning Your Air Filter

A clogged air conditioner can reduce the cooling efficiency of your unit, and can also be bad for your health. Make sure to clean the filter once every two weeks.

• Lift the front panel of the indoor unit.
• Grip the tab on the end of the filter, lift it up,then pull it towards yourself.
• Now pull the filter out.
• Clean the large air filter with warm, soapy water. Be sure to use a mild detergent.
• Rinse the filter with fresh water, then shake off excess water.
• Dry it in a cool, dry place, and refrain from exposing it to direct sunlight.
• When dry, then slide it back into the indoor unit.
• Close the front panel of the indoor unit.

Long Periods of Non-Use

if you plan not to use your air conditioner for an extended period of time, do the following

• Clean the filter
• Turn on the FAN function until the unit dries out completely

• Turn off the unit and disconnect the power
• Remove batteries from the remote control

Maintenance

Pre-Season Inspection

After long periods of non-use, or before periods of frequent use, do the following

• Check for damaged wires
• Clean the filter

• Make sure nothing is blocking all air inlets and outlets

Troubleshooting

SAFETY PRECAUTIONS

• If ANY of the following conditions occurs, turn off your unit immediately!
• The power cord is damaged or abnormally warm
• You smell a burning odor
• The unit emits loud or abnormal sounds
• A power fuse blows or the circuit breaker frequently trips
• Water or other objects fall into or out of the unit

DO NOT ATTEMPT TO FIX THESE YOURSELF! CONTACT AN AUTHORIZED SERVICE PROVIDER IMMEDIATELY!

Common Issues

The following problems are not a malfunction and in most situations will not require repairs.

When troubles occur, please check the following points before contacting a repair company.

This symbol indicates that this product shall not be disposed of with other household wastes at the end of its Service. used device must be returned to electrical and electronic devices. Io and these collection Systems please contact your local where the product was purchased. tach household performs an important role in recovering and recycling old appliances. Appropriate disposal of used appliances helps prevent potential negative consequences for the environment and human health.

Specifications

• Specifications are standard values calculated based on rated operating conditions,
• They will vary in different work conditions.
• Rated Cooling value is tested under 27/19(In.) 35/24(Out.) condition.