SEALEY VS9113 PANEL BAG SET 2PC Instruction Manual
MODEL NO: VS9113
Instruction Manual
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
- WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
√ Familiarise yourself with the application and limitations of the panel bag set, as well as the potential hazards.
√ Maintain the set in good condition.
√ Replace damaged parts.
Use genuine parts only. Unauthorized parts may be dangerous and will invalidate the warranty.
√ Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
√ Keep children and unauthorized persons away from the working area.
× put hands/fingers in apertures created by bags without first inserting a mechanical chock to prevent accidental injury
× DO NOT use the panel bags for purposes other than those for which they were designed.
× DO NOT over-inflate.
× DO NOT use on doors fitted with airbags.
× DO NOT use when you are tired, under the influence of alcohol, drugs, or intoxicating medication.
√ Deflate bag prior to storage.
√ Store in a clean, dry place.
INTRODUCTION
Multi-purpose durable air cushion devices with rigid edges and fine air control valve. Suitable for positioning panels, bonnets, and boots, prior to fitment. 2mm thickness and semi-rigid construction allows bags to be slid between the window frame and weather-stripping for improved access for emergency vehicle opening tools. A soft air cushion is gentle on paintwork, frame, beadings, and glass. Can also be used for positioning kitchen units, windows, and doors.
SPECIFICATION
Model No: …………………………………………………………VS9113
Load Capacity: ……………………………………………………. 135kg
Bag Dimensions (W x H): …………………………….128 x 270mm
Minimum/Maximum Thickness ………………………. 2mm-80mm
ASSEMBLY & INSTALLATION
4.1. To adjust body panels
4.1.1. Place a panel airbag between the vehicle body and panel to be fitted (bonnet, boot, etc.) at the point that needs adjusting.
4.1.2. Ensure the pump valve is closed (fully clock-wise), pump air into the bag by squeezing the bulb on the pump, (taking care, not to over-inflate) moving the panel to the required position.
4.1.3. When the panel has been fitted, simply deflate the panel bags by turning the release valve anti-clockwise.
4.1.4. The rigid construction allows the bag to be inserted between a window frame and weather stripping on a vehicle door etc. To ease this operation, first, lubricate the bag with a water-soluble lubricant such as washing up liquid. When using the bag to gain access through a door etc., ensure that a mechanical means of chocking the door is employed before inserting fingers or hands, etc.
MAINTENANCE
5.1. When the bags are not in use ensure they are deflated, clean, and stored in a dry location.
5.1.1. Inspect before use to check for any sign of damage. The bags cannot be repaired; any sign of damage must result in the bag being discarded.
ENVIRONMENT PROTECTION
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
© Jack Sealey Limited
