AEG IKB84443IB Hob User Manual

IKB84443IB Hob

IKB84443IB
USER MANUAL

EN User Manual Hob
DE Benutzerinformation Kochfeld
FR Notice d’utilisation Table de cuisson
IT Istruzioni per l’uso Piano cottura
ES Manual de instrucciones Placa de cocción

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support
Register your product for better service: www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.
CONTENTS
1. SAFETY INFORMATION…………………………………………………………………………………… 2 2. SAFETY INSTRUCTIONS…………………………………………………………………………………. 4 3. INSTALLATION…………………………………………………………………………………………………6 4. PRODUCT DESCRIPTION………………………………………………………………………………… 9 5. DAILY USE……………………………………………………………………………………………………..11 6. HINTS AND TIPS……………………………………………………………………………………………. 15 7. CARE AND CLEANING…………………………………………………………………………………… 17 8. TROUBLESHOOTING…………………………………………………………………………………….. 18 9. TECHNICAL DATA…………………………………………………………………………………………. 19 10. ENERGY EFFICIENCY…………………………………………………………………………………..20
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
2 ENGLISH

1.1 Children and vulnerable people safety · This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children of less than 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. · Do not let children play with the appliance. · Keep all packaging away from children and dispose of it appropriately. · WARNING: Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts become hot during use. · If the appliance has a child safety device, it should be activated. · Children shall not carry out cleaning and user maintenance of the appliance without supervision. 1.2 General Safety · WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. · WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. · NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. · CAUTION: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. · CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.
ENGLISH 3

· WARNING: Danger of fire: Do not store items on the cooking surfaces.
· Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
· Do not use the appliance before installing it in the built-in structure.
· Do not use a steam cleaner to clean the appliance. · After use, switch off the hob element by its control and do
not rely on the pan detector. · If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply. In either case contact the Authorised Service Centre. · If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard. · WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING! Only a qualified person must install this appliance.
WARNING! Risk of injury or damage to the appliance.
· Remove all the packaging. · Do not install or use a damaged
appliance. · Follow the installation instructions
supplied with the appliance.

· Keep the minimum distance from other appliances and units.
· Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
· Seal the cut surfaces with a sealant to prevent moisture from causing swelling.
· Protect the bottom of the appliance from steam and moisture.
· Do not install the appliance next to a door or under a window. This prevents hot cookware from falling from the appliance when the door or the window is opened.
· Each appliance has cooling fans on the bottom.

4 ENGLISH

· If the appliance is installed above a drawer: Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system. Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer.
· Remove any separator panels installed in the cabinet below the appliance.
2.2 Electrical Connection
WARNING! Risk of fire and electric shock.
· All electrical connections should be made by a qualified electrician.
· The appliance must be earthed. · Before carrying out any operation make
sure that the appliance is disconnected from the power supply. · Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. · Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. · Use the correct electricity mains cable. · Do not let the electricity mains cable tangle. · Make sure that a shock protection is installed. · Use the strain relief clamp on the cable. · Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets. · Do not use multi-plug adapters and extension cables. · Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable. · The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. · Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.

· If the mains socket is loose, do not connect the mains plug.
· Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
· Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
· The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
2.3 Use
WARNING! Risk of injury, burns and electric shock.
· Remove all the packaging, labelling and protective film (if applicable) before first use.
· This appliance is for household use only. · Do not change the specification of this
appliance. · Make sure that the ventilation openings
are not blocked. · Do not let the appliance stay unattended
during operation. · Set the cooking zone to “off” after each
use. · Do not rely on the pan detector. · Do not put cutlery or saucepan lids on the
cooking zones. They can become hot. · Do not operate the appliance with wet
hands or when it has contact with water. · Do not use the appliance as a work
surface or as a storage surface. · If the surface of the appliance is cracked,
disconnect immediately the appliance from the power supply. This to prevent an electrical shock. · Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation. · When you place food into hot oil, it may splash.
WARNING! Risk of fire and explosion
· Fats and oil when heated can release flammable vapours. Keep flames or

ENGLISH 5

heated objects away from fats and oils when you cook with them. · The vapours that very hot oil releases can cause spontaneous combustion. · Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time. · Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
WARNING! Risk of damage to the appliance.
· Do not keep hot cookware on the control panel.
· Do not put a hot pan cover on the glass surface of the hob.
· Do not let cookware boil dry. · Be careful not to let objects or cookware
fall on the appliance. The surface can be damaged. · Do not activate the cooking zones with empty cookware or without cookware. · Do not put aluminium foil on the appliance. · Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. · This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
2.4 Care and cleaning
· Clean the appliance regularly to prevent the deterioration of the surface material.

· Switch off the appliance and let it cool down before cleaning.
· Do not use water spray and steam to clean the appliance.
· Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
2.5 Service
· To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
· Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
2.6 Disposal
WARNING! Risk of injury or suffocation.
· Contact your municipal authority for information on how to discard the appliance correctly.
· Disconnect the appliance from the mains supply.
· Cut off the mains electrical cable close to the appliance and dispose of it.

3. INSTALLATION
WARNING! Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the information below from the rating plate. The rating plate is on the bottom of the hob.
Serial number ………………………
6 ENGLISH

3.2 Built-in hobs
Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.
3.3 Connection cable
· The hob is supplied with a connection cable.
· To replace the damaged mains cable, use the cable type: H05V2V2-F which withstands a temperature of 90 °C or

higher. Speak to your local Service Centre. The connection cable may only be replaced by a qualified electrician.
WARNING! All electrical connections must be made by a qualified electrician.
CAUTION! Do not drill or solder the wire ends. It is forbidden.
CAUTION! Do not connect the cable without cable end sleeve.

Two-phase connection 1. Remove the cable end sleeve from black
and brown wires. 2. Remove an insulation of the brown and
black cable ends. 3. Apply a new wire end sleeve of 1.5 mm²
on common cable end (special tool required). Cable cross section

230V~
N L

400V 2~N
N L1 L2

One-phase connection – 230 V~ Green – yellow

Two-phase connection – 400 V 2 ~ N Green – yellow

Blue and blue

Black and brown

Black

Brown

3.4 Attaching the seal – Integrated installation
1. Clean the rabbets in the worktop. 2. Cut the supplied 3x10mm seal stripe into
4 stripes. The stripes must have the same length as the rabbets. 3. Cut the ends of the stripes at an angle of 45°. They should fit in the corners of the rabbets accurately. 4. Attach the stripes to the rabbets. Do not stretch the stripes. Do not bond the ends of the stripes one over the other. After you assemble the hob, seal the remaining gap between the glass ceramic and the worktop with silicone. Make sure the silicone does not get under the glass ceramic.

3.5 Attaching the seal – On-top installation
1. Clean the worktop around the cut out area.
2. Attach the supplied 2x6mm seal stripe to the lower edge of the hob, along the outer edge of the glass ceramic. Do not stretch it. Make sure that the ends of the seal stripe are located in the middle of one side of the hob.
3. Add some millimetres to the length when you cut the seal stripe.
4. Join the two ends of the seal stripe together.
3.6 Assembly
If you install the hob under a hood, please see the installation instructions of the hood

ENGLISH 7

for the minimum distance between the appliances.

INTEGRATED INSTALLATION

min. 500mm

min. 50mm

If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process.
ON-TOP INSTALLATION

770

510

min. 28 mm

www.youtube.com/electrolux www.youtube.com/aeg
How to install your AEG Induction Hob – Worktop installation
www.youtube.com/electrolux www.youtube.com/aeg
How to install your AEG induction hob flush installation

8 ENGLISH

4. PRODUCT DESCRIPTION
4.1 Cooking surface layout

240 mm

1 Induction cooking zone 2 Control panel

145 mm

4.2 Control panel layout

1 23 4 5

11 10 9

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.

Sensor Function field

ON / OFF

Comment To activate and deactivate the hob.

Lock / Child Safety Device

To lock / unlock the control panel.

Pause

To activate and deactivate the function.

Bridge

To activate and deactivate the function.

567-
8

Heat setting display

To show the heat setting.

Timer indicators of cooking zones To show for which zone you set the time.

Timer display

To show the time in minutes.

Hob²Hood

To activate and deactivate the manual mode of the function.

ENGLISH 9

Sensor Function field

–

PowerBoost

12 –

Control bar

4.3 Heat setting displays

Comment
To select the cooking zone. To increase or decrease the time. To activate the function. To set a heat setting.

Display –
+ digit / /

Description The cooking zone is deactivated. The cooking zone operates. Pause operates. Automatic Heat Up operates. PowerBoost operates. There is a malfunction. OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid- ual heat. Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates.

4.4 OptiHeat Control (3 step Residual heat indicator)
WARNING! / / As long as the
indicator is on, there is a risk of burns from residual heat.
The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.
The indicators / / appear when a cooking zone is hot. They show the level of

the residual heat for the cooking zones you are currently using.
The indicator may also appear: · for the neighbouring cooking zones even
if you are not using them, · when hot cookware is placed on cold
cooking zone, · when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking zone has cooled down.

10 ENGLISH

5. DAILY USE

WARNING! Refer to Safety chapters.

5.1 Activating and deactivating
Touch for 1 second to activate or deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob automatically if:
· all cooking zones are deactivated, · you do not set the heat setting after you
activate the hob, · you spill something or put something on
the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. · the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again. · you use incorrect cookware. The symbol
comes on and the cooking zone deactivates automatically after 2 minutes. · you do not deactivate a cooking zone or change the heat setting. After some time
comes on and the hob deactivates. The relation between the heat setting and the time after which the hob deactivates:

Heat setting
, 1 – 3 4 – 7 8 – 9 10 – 14

The hob deactivates after 6 hours
5 hours 4 hours 1.5 hour

5.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting or move your finger along the control bar until you reach the correct heat setting.

5.4 Using the cooking zones
Place the cookware in the centre of the selected zone. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. You can cook with large cookware placed on two cooking zones at the same time. The cookware must cover the centres of both zones but not go beyond the area marking. If the cookware is located between the two centres, Bridge function will not be activated.
5.5 Bridge
The function operates when the pot covers the centres of the two zones. This function connects two left side cooking zones and they operate as one. First set the heat setting for one of the left side cooking zones.

ENGLISH 11

To activate the function: touch . To set or change the heat setting touch one of the control sensors.
To deactivate the function: touch . The cooking zones operate independently.
5.6 Automatic Heat Up
Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then continues to cook at the desired heating setting.
To activate the function the cooking zone must be cold.
To activate the function for a cooking zone: touch ( comes on). Immediately touch a desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the heat setting.
5.7 PowerBoost
This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time. After this time the induction cooking zone automatically sets back to the highest heat setting.
Refer to “Technical data” chapter.
To activate the function for a cooking zone: touch . comes on. To deactivate the function: change the heat setting.
5.8 Timer
· Count Down Timer You can use this function to set the length of a single cooking session.
First set the heat setting for the cooking zone, then set the function.
To set the cooking zone: touch repeatedly until the indicator of a cooking zone appears.

To activate the function: touch of the timer to set the time (00 – 99 minutes). When the indicator of the cooking zone starts to flash, the time counts down.
To see the remaining time: touch to set the cooking zone. The indicator of the cooking zone starts to flash. The display shows the remaining time.
To change the time: touch to set the cooking zone. Touch or .
To deactivate the function: touch to set the cooking zone and then touch . The remaining time counts down to 00. The indicator of the cooking zone disappears.
When the countdown ends, an acoustic signal sounds and 00 flashes. The cooking zone deactivates.
To stop the sound: touch . · CountUp Timer You can use this function to monitor how long the cooking zone operates.
To set the cooking zone: touch repeatedly until the indicator of a cooking zone appears.
To activate the function: touch of the timer. appears. When the indicator of the cooking zone starts to flash, the time counts up. The display switches between and the counted time (in minutes).
To see how long the cooking zone operates: touch to set the cooking zone. The indicator of the cooking zone starts to flash. The display shows how long the zone operates.
To deactivate the function: touch and then touch or . The indicator of the cooking zone disappears.
· Minute Minder You can use this function when the hob is activated and the cooking zones do not operate. The heat setting display shows .

12 ENGLISH

To activate the function: touch and then touch or of the timer to set the time. When the time finishes, an acoustic signal sounds and 00 flashes.
To stop the sound: touch .
The function has no effect on the operation of the cooking zones.
5.9 Pause
This function sets all cooking zones that operate to the lowest heat setting. When the function operates, all other symbols on the control panels are locked. The function does not stop the timer functions.
Touch to activate the function. comes on. The heat setting is lowered to
1. To deactivate the function, touch . The previous heat setting comes on.
5.10 Lock
You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting. Set the heat setting first.
To activate the function: touch . comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch . The previous heat setting comes on.
When you deactivate the hob, you also deactivate this function.
5.11 Child Safety Device
This function prevents an accidental operation of the hob. To activate the function: activate the hob with . Do not set any heat setting. Touch
for 4 seconds. comes on. Deactivate the hob with . To deactivate the function: activate the hob with . Do not set any heat setting. Touch

for 4 seconds. comes on. Deactivate the hob with .
To override the function for only one cooking time: activate the hob with . comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you deactivate the hob with the function operates again.
5.12 OffSound Control (Deactivating and activating the sounds)
Deactivate the hob. Touch for 3 seconds. The display comes on and goes out. Touch
for 3 seconds. or comes on. Touch of the timer to choose one of the following: · – the sounds are off · – the sounds are on To confirm your selection wait until the hob deactivates automatically.
When the function is set to you can hear the sounds only when: · you touch · Minute Minder comes down · Count Down Timer comes down · you put something on the control panel.
5.13 Power limitation
The hob is set to its highest possible power level by default.
To decrease or increase the power level: 1. Deactivate the hob. 2. Press and hold for 3 seconds. The
display flashes. 3. Press and hold for 3 seconds. or
appears. 4. Press . P72 appears. 5. Press / of the timer to set the
power level. Power levels Refer to “Technical data” chapter.

ENGLISH 13

CAUTION! Make sure that the selected power fits the house installation fuses.
· P72 — 7200 W · P15 — 1500 W · P20 — 2000 W · P25 — 2500 W · P30 — 3000 W · P35 — 3500 W · P40 — 4000 W · P45 — 4500 W · P50 — 5000 W · P60 — 6000 W
5.14 Power management
If multiple zones are active and the consumed power exceeds the limitation of the power supply, this function divides the available power between all cooking zones. The hob controls heat settings to protect the fuses of the house installation.
· Cooking zones are grouped according to the location and number of the phases in the hob. Each phase has a maximum electricity loading (3700 W). If the hob reaches the limit of maximum available power within one phase, the power of the cooking zones will be automatically reduced.
· The heat setting of the cooking zone selected last is always prioritised. The remaining power will be divided between the previously activated cooking zones in reverse order of selection.
· The heat setting display of the reduced zones changes between the initially selected heat setting and the reduced heat setting.
· Wait until the display stops flashing or reduce the heat setting of the cooking zone selected last. The cooking zones will continue operating with the reduced heat setting. Change the heat settings of the cooking zones manually, if necessary.
Power management with Power limitation When you set the Power limitation function to 6000 W or less, the power of the hob is divided among all cooking zones.
Refer to the illustration for possible combinations in which power can be distributed among the cooking zones.

When you set the Power limitation function to more than 6000 W, the power of the hob is divided between its left and right side.
5.15 Hob²Hood
It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually.
For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to hood user manual. Operating the function automatically To operate the function automatically set the automatic mode to H1 H6. The hob is originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes temperature of the cookware automatically and adjusts the speed of the fan.

14 ENGLISH

Automatic modes

Automat- ic light

Boiling1)

Frying2)

Mode H0 Off

Off

Mode H1 On

Off

Mode

H2 3)

Fan speed Fan speed

Mode H3 On

Off

Fan speed

Mode H4 On

Fan speed Fan speed

Mode H5 On

Fan speed Fan speed

Mode H6 On

Fan speed Fan speed

1) The hob detects the boiling process and acti- vates fan speed in accordance with automatic mode. 2) The hob detects the frying process and acti- vates fan speed in accordance with automatic mode. 3) This mode activates the fan and the light and does not rely on the temperature.

Changing the automatic mode 1. Deactivate the appliance. 2. Touch for 3 seconds. The display
comes on and goes off. 3. Touch for 3 seconds. 4. Touch a few times until comes on. 5. Touch of the Timer to select an
automatic mode.

To operate the hood directly on the hood panel deactivate the automatic mode of the function.

When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds.
Operating the fan speed manually You can also operate the function manually.
To do that touch when the hob is active. This deactivates automatic operation of the function and allows you to change the fan
speed manually. When you press you raise the fan speed by one. When you reach
an intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan
speed 1 touch .
To activate automatic operation of the function, deactivate the hob and activate it again.
Activating the light You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 H6.
The light on the hood deactivates 2 minutes after deactivating the hob.

6. HINTS AND TIPS
WARNING! Refer to Safety chapters.

6.1 Cookware
For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly.
Use the induction cooking zones with suitable cookware.
ENGLISH 15

· The bottom of the cookware must be as thick and flat as possible.
· Ensure pan bases are clean and dry before placing on the hob surface.
· In order to avoid scratches, do not slide or rub the pot across the ceramic glass.
Cookware material
· correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer).
· not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is suitable for an induction hob if:
· water boils very quickly on a zone set to the highest heat setting.
· a magnet pulls on to the bottom of the cookware.
Cookware dimensions
· Induction cooking zones adapt to the dimension of the bottom of the cookware automatically.
· The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power generated by the cooking zone.
· For both safety reasons and optimal cooking results, do not use cookware larger than indicated in “Cooking zones specification”. Avoid keeping cookware close to the control panel during the cooking session. This might impact the functioning of the control panel or accidentally activate hob functions.
Refer to “Technical data”.

6.2 The noises during operation
If you can hear:
· crack noise: cookware is made of different materials (a sandwich construction).
· whistle sound: you use a cooking zone with a high power level and the cookware is made of different materials (a sandwich construction).
· humming: you use a high power level. · clicking: electric switching occurs. · hissing, buzzing: the fan operates. The noises are normal and do not indicate any malfunction.
6.3 Öko Timer (Eco Timer)
To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation.
6.4 Examples of cooking applications
The correlation between the heat setting of a zone and its consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase of the consumption of power. It means that a cooking zone with the medium heat setting uses less than a half of its power.
The data in the table is for guidance only.

Heat setting
– 1 1 – 3 1 – 3 3 – 5
5 – 7

Use to:

Time (min)

Hints

Keep cooked food warm.

as neces- Put a lid on the cookware. sary

Hollandaise sauce, melt: butter, choco- 5 – 25 late, gelatine.

Mix from time to time.

Solidify: fluffy omelettes, baked eggs. 10 – 40

Cook with a lid on.

Simmer rice and milkbased dishes, heat up ready-cooked meals.

25 – 50

Add at least twice as much liquid as rice, mix milk dishes halfway through the procedure.

Steam vegetables, fish, meat.

20 – 45

Add a couple of tablespoons of liquid.

16 ENGLISH

Heat setting 7 – 9 7 – 9 9 – 12
12 – 13 14

Use to:

Time (min)

Hints

Steam potatoes.

20 – 60

Use max. ¼ l of water for 750 g of po- tatoes.

Cook larger quantities of food, stews and soups.

60 – 150

Up to 3 l of liquid plus ingredients.

Gentle fry: escalope, veal cordon bleu, as neces- Turn halfway through. cutlets, rissoles, sausages, liver, roux, sary eggs, pancakes, doughnuts.

Heavy fry, hash browns, loin steaks, steaks.

5 – 15

Turn halfway through.

Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. PowerBoost is activated.

6.5 Hints and Tips for Hob²Hood
When you operate the hob with the function:
· Protect the hood panel from direct sunlight.
· Do not spot halogen light on the hood panel.
· Do not cover the hob control panel. · Do not interrupt the signal between the
hob and the hood (e.g. with the hand, a cookware handle or a tall pot). See the picture. The hood in the picture is only exemplary.

Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on.
Cooker hoods with the Hob²Hood function
To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work
with this function must have the symbol .

7. CARE AND CLEANING
WARNING! Refer to Safety chapters.

7.1 General information
· Clean the hob after each use. · Always use cookware with a clean base.
ENGLISH 17

· Scratches or dark stains on the surface have no effect on how the hob operates.
· Use a special cleaner suitable for the surface of the hob.
· Use a special scraper for the glass.
7.2 Cleaning the hob
· Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface

at an acute angle and move the blade on the surface. · Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a nonabrasive detergent. After cleaning, wipe the hob dry with a soft cloth. · Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth.

8. TROUBLESHOOTING
WARNING! Refer to Safety chapters.
8.1 What to do if…

Problem You cannot activate or operate the hob.
An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactivated. The hob deactivates. Residual heat indicator does not come on. Hob²Hood does not work.

Possible cause

Remedy

The hob is not connected to an elec- Check if the hob is correctly connected trical supply or it is connected incor- to the electrical supply. rectly.

The fuse is blown.

Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.

You do not set the heat setting for 10 seconds.

Activate the hob again and set the heat setting in less than 10 seconds.

You touched 2 or more sensor fields Touch only one sensor field. at the same time.

Pause operates.

Refer to “Daily use”.

There is water or fat stains on the control panel.

Clean the control panel.

You put something on one or more Remove the object from the sensor

sensor fields.

fields.

You put something on the sensor field .

Remove the object from the sensor field.

The zone is not hot because it oper- If the zone operated sufficiently long to

ated only for a short time or the sen- be hot, speak to an Authorised Service

sor is damaged.

Centre.

You covered the control panel.

Remove the object from the control panel.

18 ENGLISH

Problem
Automatic Heat Up does not op- erate.
The heat setting changes be- tween two levels. The sensor fields become hot. There is no sound when you touch the panel sensor fields.
comes on. comes on.
and a number come on.
You can hear a constant beep noise.

Possible cause

Remedy

You use a very tall pot which blocks Use a smaller pot, change the cooking

the signal.

zone or operate the hood manually.

The zone is hot.

Let the zone become sufficiently cool.

The highest heat setting is set. Power management operates.

The highest heat setting has the same power as the function.
Refer to “Daily use”.

The cookware is too large or you put Put large cookware on the rear zones,

it too near to the controls.

if possible.

The sounds are deactivated.

Activate the sounds. Refer to “Daily use”.

Child Safety Device or Lock oper- ates.

Refer to “Daily use”.

There is no cookware on the zone. Put cookware on the zone.

The cookware is unsuitable. The diameter of the bottom of the cookware is too small for the zone. There is an error in the hob.
The electrical connection is incor- rect.

Use suitable cookware. Refer to “Hints and tips”.
Use cookware with correct dimen- sions. Refer to “Technical data”.
Deactivate the hob and activate it
again after 30 seconds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre.
Disconnect the hob from the electrical supply. Ask a qualified electrician to check the installation.

8.2 If you cannot find a solution…
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error

message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet.

9. TECHNICAL DATA
9.1 Rating plate

Model IKB84443IB Typ 62 D4A 01 AD Induction 7.2 kW

PNC 949 597 834 00 220 – 240 V / 400 V 2N 50 – 60 Hz Made in Germany
ENGLISH 19

Ser.Nr. …………….. AEG
9.2 Cooking zones specification

7.2 kW

Cooking zone
Left front Left rear Middle front Right rear

Nominal power (maximum heat setting) [W]
2300
2300
1400
2300

PowerBoost [W] PowerBoost maximum dura- tion [min]

3200

2500

3600

Cookware diame- ter [mm]
125 – 210 125 – 210 125 – 145 205 – 240

The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.

For optimal cooking results use cookware no larger than the diameter in the table.

10. ENERGY EFFICIENCY
10.1 Product information*

Model identification Type of hob Number of cooking zones Heating technology Diameter of circular cooking zones (Ø)
Energy consumption per cooking zone (EC electric cooking)
Energy consumption of the hob (EC electric hob)

Left front Left rear Middle front Right rear
Left front Left rear Middle front Right rear

IKB84443IB
Built-In Hob
4
Induction
21.0 cm 21.0 cm 14.5 cm 24.0 cm
179.6 Wh / kg 177.0 Wh / kg 180.2 Wh / kg 174.6 Wh / kg
177.9 Wh / kg

* For European Union according to EU 66/2014. For Belarus according to STB 2477-2017, Annex A. For Ukraine according to 742/2019.
EN 60350-2 – Household electric cooking appliances – Part 2: Hobs – Methods for measuring performance
The energy measurements referring to the cooking area are identified by the markings of the respective cooking zones.

10.2 Energy saving
You can save energy during everyday cooking if you follow below hints.

· When you heat up water, use only the amount you need.
· If it is possible, always put the lids on the cookware.

20 ENGLISH

· Before you activate the cooking zone put the cookware on it.
· Put the smaller cookware on the smaller cooking zones.
· Put the cookware directly in the centre of the cooking zone.

· Use the residual heat to keep the food warm or to melt it.

11. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of

appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

ENGLISH 21

FÜR PERFEKTE ERGEBNISSE
Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Bitte nehmen Sie sich ein paar Minuten Zeit, um das Beste aus ihm herauszuholen. Besuchen Sie uns auf unserer Website, um:
Anwendungshinweise, Prospekte, Informationen zu Fehlerbehebung, Service und Reparatur zu erhalten: www.aeg.com/support Registrieren Sie Ihr Produkt, um einen erstklassigen Service zu erhalten: www.registeraeg.com
Um Zubehör, Verbrauchsmaterial und Original-Ersatzteile für Ihr Gerät zu kaufen: www.aeg.com/shop
KUNDENDIENST UND SERVICE
Verwenden Sie immer Original-Ersatzteile. Halten Sie folgende Angaben bereit, wenn Sie sich an einen autorisierten Kundendienst wenden: Modell, PNC, Seriennummer. Die Daten finden Sie auf dem Typenschild.
Warnungs-/Sicherheitshinweise Allgemeine Informationen und Empfehlungen Informationen zum Umweltschutz
Änderungen vorbehalten.
INHALTSVERZEICHNIS
1. SICHERHEITSHINWEISE……………………………………………………………………………….. 22 2. SICHERHEITSANWEISUNGEN……………………………………………………………………….. 25 3. MONTAGE…………………………………………………………………………………………………….. 27 4. GERÄTEBESCHREIBUNG……………………………………………………………………………….30 5. TÄGLICHER GEBRAUCH……………………………………………………………………………….. 32 6. TIPPS UND HINWEISE…………………………………………………………………………………… 37 7. REINIGUNG UND PFLEGE……………………………………………………………………………… 39 8. FEHLERSUCHE………………………………………………………………………………………………40 9. TECHNISCHE DATEN……………………………………………………………………………………..42 10. ENERGIEEFFIZIENZ…………………………………………………………………………………….. 42
1. SICHERHEITSHINWEISE
Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Bedienungsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung übernimmt der Hersteller keine Haftung.
22 DEUTSCH

Bewahren Sie die Anleitung zum Nachschlagen an einem sicheren und zugänglichen Ort auf. 1P.e1rsSoicnheenrheit von Kindern und schutzbedürftigen · Das Gerät kann von Kindern ab 8 Jahren und Personen mit
eingeschränkten physischen, sensorischen oder geistigen Fähigkeiten oder mit mangelnder Erfahrung und/oder mangelndem Wissen nur dann verwendet werden, wenn sie durch eine für ihre Sicherheit zuständige Person beaufsichtigt werden oder in die sichere Verwendung des Geräts eingewiesen wurden und die mit dem Gerät verbundenen Gefahren verstanden haben. Kinder unter 8 Jahren und Personen mit schweren Behinderungen oder Mehrfachbehinderung müssen vom Gerät ferngehalten werden, wenn sie nicht ständig beaufsichtigt werden. · Kinder dürfen nicht mit dem Gerät spielen. · Halten Sie sämtliches Verpackungsmaterial von Kindern fern und entsorgen Sie es ordnungsgemäß. · WARNUNG: Halten Sie Kinder und Haustiere während des Betriebs oder der Abkühlphase vom Gerät fern. Die zugänglichen Geräteteile werden beim Betrieb sehr heiß. · Falls Ihr Gerät mit einer Kindersicherung ausgestattet ist, empfehlen wir, diese einzuschalten. · Kinder dürfen keine Reinigung und Wartung ohne Beaufsichtigung durchführen. 1.2 Allgemeine Sicherheit · WARNUNG: Das Gerät und die zugänglichen Geräteteile werden während des Betriebs heiß. Seien Sie vorsichtig und berühren Sie niemals die Heizelemente. · WARNUNG: Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. · Versuchen Sie NIEMALS, ein Feuer mit Wasser zu löschen, sondern schalten Sie das Gerät aus und decken Sie die Flamme ab, z.B. mit einem Deckel oder einer Feuerlöschdecke.
DEUTSCH 23

· VORSICHT: Das Gerät darf nicht durch ein externes Schaltgerät, wie einer Zeitschaltuhr, mit Strom versorgt oder an einen Schaltkreis angeschlossen werden, der vom einem Programm regelmäßig ein- und ausgeschaltet wird.
· VORSICHT: Der Kochvorgang muss überwacht werden. Ein kurzer Kochvorgang muss kontinuierlich überwacht werden.
· WARNUNG: Brandgefahr: Legen Sie keine Gegenstände auf dem Kochfeld ab.
· Legen Sie keine Metallgegenstände wie Messer, Gabeln, Löffel oder Topfdeckel auf die Oberfläche des Kochfelds, da diese heiß werden können.
· Verwenden Sie ds Gerät nicht, bevor es in den Einbauschrank gesetzt wird.
· Reinigen Sie das Gerät nicht mit einem Dampfstrahlreiniger.
· Schalten Sie die Kochzone nach dem Gebrauch ab und verlassen Sie sich nicht auf die Topferkennung.
· Hat die Glaskeramik-/Glasoberfläche einen Sprung, schalten Sie das Gerät aus und nehmen Sie es vom Stromnetz. Falls das Gerät direkt mit dem Stromnetz verbunden ist und nicht getrennt werden kann, nehmen Sie die Sicherung für den Anschluss heraus, um die Stromversorgung zu unterbrechen. Verständigen Sie in jedem Fall den autorisierten Kundendienst.
· Wenn das Netzkabel beschädigt ist, muss es vom Hersteller, seinem autorisierten Kundenservice oder einer gleichermaßen qualifizierten Person ausgetauscht werden, um Gefahrenquellen zu vermeiden.
· WARNUNG: Verwenden Sie nur Schutzabdeckungen des Herstellers des Kochgeräts, von ihm in der Bedienungsanleitung als geeignete und empfohlene Schutzabdeckungen oder die im Gerät enthaltene Schutzabdeckung. Es besteht Unfallgefahr durch die Verwendung ungeeigneter Schutzabdeckungen.
24 DEUTSCH

2. SICHERHEITSANWEISUNGEN

2.1 Montage

2.2 Elektrischer Anschluss

WARNUNG! Die Montage des Geräts darf nur von einer qualifizierten Fachkraft durchgeführt werden.
WARNUNG! Verletzungsgefahr sowie Risiko von Schäden am Gerät.
· Entfernen Sie das gesamte Verpackungsmaterial.
· Montieren Sie ein beschädigtes Gerät nicht und benutzen Sie es nicht.
· Halten Sie sich an die mitgelieferte Montageanleitung.
· Die Mindestabstände zu anderen Geräten und Küchenmöbeln sind einzuhalten.
· Seien Sie beim Umsetzen des Gerätes vorsichtig, da es sehr schwer ist. Tragen Sie stets Sicherheitshandschuhe und festes Schuhwerk.
· Dichten Sie die Ausschnittskanten mit einem Dichtungsmittel ab, um ein Aufquellen durch Feuchtigkeit zu verhindern.
· Schützen Sie die Geräteunterseite vor Dampf und Feuchtigkeit.
· Installieren Sie das Gerät nicht direkt neben einer Tür oder unter einem Fenster. So kann heißes Kochgeschirr nicht herunterfallen, wenn die Tür oder das Fenster geöffnet wird.
· Jedes Gerät besitzt Kühlgebläse auf seiner Unterseite.
· Ist das Gerät über einer Schublade installiert: Lagern Sie keine kleinen Papierstücke oder -blätter, die eingezogen werden können, in der Schublade, da sie die Kühlgebläse beschädigen oder das Kühlsystem beeinträchtigen können. Halten Sie einen Abstand von mindestens 2 cm zwischen dem Geräteboden und den Teilen, die in der Schublade gelagert sind, ein.
· Entfernen Sie Trennplatten, die im Küchenmöbel unter dem Gerät installiert sind.

WARNUNG! Brand- und Stromschlaggefahr.
· Alle elektrischen Anschlüsse sind von einem geprüften Elektriker vorzunehmen.
· Das Gerät muss geerdet sein. · Vor der Durchführung jeglicher Arbeiten
muss das Gerät von der elektrischen Stromversorgung getrennt werden. · Stellen Sie sicher, dass die Daten auf dem Typenschild mit den elektrischen Nennwerten der Netzspannung übereinstimmen. · Vergewissern Sie sich, dass das Gerät ordnungsgemäß installiert ist. Lockere und unsachgemäße Kabel oder Stecker (falls vorhanden) können die Klemme überhitzen. · Stellen Sie sicher, dass Sie das richtige Kabel für den elektrischen Netzanschluss verwenden. · Achten Sie darauf, dass das Netzkabel nicht lose hängt oder sich verheddert. · Sorgen Sie dafür, dass ein Berührungsschutz installiert wird. · Verwenden Sie die Zugentlastung für das Kabel. · Stellen Sie beim elektrischen Anschluss des Gerätes sicher, dass das Netzkabel oder ggf. der Netzstecker nicht mit dem heißen Gerät oder heißem Kochgeschirr in Berührung kommt. · Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. · Achten Sie darauf, Netzstecker (falls vorhanden) und Netzkabel nicht zu beschädigen. Wenden Sie sich zum Austausch eines beschädigten Netzkabels an unseren autorisierten Kundendienst oder eine Elektrofachkraft. · Alle Teile, die gegen direktes Berühren schützen, sowie die isolierten Teile müssen so befestigt werden, dass sie nicht ohne Werkzeug entfernt werden können. · Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist.

DEUTSCH 25

· Falls die Steckdose lose ist, schließen Sie den Netzstecker nicht an.
· Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät von der Stromversorgung trennen möchten. Ziehen Sie stets am Netzstecker.
· Verwenden Sie nur geeignete Trenneinrichtungen: Überlastschalter, Sicherungen (Schraubsicherungen müssen aus dem Halter entfernt werden können), Fehlerstromschutzschalter und Schütze.
· Die elektrische Installation muss eine Trenneinrichtung aufweisen, mit der Sie das Gerät allpolig von der Stromversorgung trennen können. Die Trenneinrichtung muss mit einer Kontaktöffnungsbreite von mindestens 3 mm ausgeführt sein.
2.3 Gebrauch
WARNUNG! Verletzungs-, Verbrennungsund Stromschlaggefahr.
· Entfernen Sie vor dem ersten Gebrauch das gesamte Verpackungsmaterial, die Aufkleber und Schutzfolie (falls vorhanden).
· Dieses Gerät ist ausschließlich zur Verwendung im Haushalt bestimmt.
· Nehmen Sie keine technischen Änderungen am Gerät vor.
· Die Lüftungsöffnungen dürfen nicht abgedeckt werden.
· Lassen Sie das Gerät bei Betrieb nicht unbeaufsichtigt.
· Schalten Sie die Kochzonen nach jedem Gebrauch aus.
· Verlassen Sie sich nicht auf die Topferkennung.
· Legen Sie kein Besteck und keine Topfdeckel auf die Kochzonen. Anderenfalls werden sie sehr heiß.
· Bedienen Sie das Gerät nicht mit feuchten oder nassen Händen oder wenn es mit Wasser in Kontakt gekommen ist.
· Benutzen Sie das Gerät nicht als Arbeitsoder Abstellfläche.
· Hat die Geräteoberfläche einen Sprung, trennen Sie das Gerät umgehend von der Spannungsversorgung. Dies dient zur Vermeidung eines Stromschlags.

· Benutzer mit einem Herzschrittmacher müssen einen Mindestabstand von 30 cm zu den Induktionskochzonen einhalten, wenn das Gerät in Betrieb ist.
· Wenn Sie Nahrungsmittel in heißes Öl geben, kann dieses spritzen.
WARNUNG! Brand- und Explosionsgefahr
· Erhitzte Öle und Fette können brennbare Dämpfe freisetzen. Halten Sie Flammen und erhitzte Gegenstände beim Kochen mit Fetten und Ölen von diesen fern.
· Die von sehr heißem Öl freigesetzten Dämpfe können eine Selbstzündung verursachen.
· Bereits verwendetes Öl kann Lebensmittelreste enthalten und schon bei niedrigeren Temperaturen eher einen Brand verursachen als frisches Öl.
· Laden Sie keine entflammbaren Produkte oder Gegenstände, die mit entflammbaren Produkten benetzt sind, in das Gerät und stellen Sie solche nicht in die Nähe oder auf das Gerät.
WARNUNG! Risiko von Schäden am Gerät.
· Stellen Sie kein heißes Kochgeschirr auf das Bedienfeld.
· Legen Sie keine heißen Topfdeckel auf die Glasoberfläche des Kochfeldes.
· Lassen Sie das Kochgeschirr nicht leerkochen.
· Lassen Sie keine Gegenstände oder Kochgeschirr auf das Gerät fallen. Die Oberfläche könnte beschädigt werden.
· Schalten Sie die Kochzonen niemals ein, wenn sich kein Kochgeschirr darauf befindet, oder wenn das Kochgeschirr leer ist.
· Legen Sie keine Alufolie auf das Gerät. · Kochgeschirr aus Gusseisen, Aluminium
oder mit beschädigten Böden kann die Glas- bzw. Glaskeramikoberfläche verkratzen. Heben Sie das Kochgeschirr stets an, wenn Sie es auf der Kochfläche umsetzen möchten. · Dieses Gerät ist nur zum Kochen bestimmt. Jeder andere Gebrauch ist als bestimmungsfremd anzusehen, zum Beispiel das Beheizen eines Raums.

26 DEUTSCH

2.4 Reinigung und Pflege
· Reinigen Sie das Gerät regelmäßig, um eine Verschlechterung des Oberflächenmaterials zu verhindern.
· Schalten Sie das Gerät vor dem Reinigen aus und lassen Sie es abkühlen
· Reinigen Sie das Gerät nicht mit Wasserspray oder Dampf.
· Reinigen Sie das Geräts mit einem weichen, feuchten Tuch. Verwenden Sie ausschließlich Neutralreiniger. Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen, Lösungsmittel oder Metallgegenstände.
2.5 Wartung
· Wenden Sie sich zur Reparatur des Geräts an den autorisierten Kundendienst. Dabei dürfen ausschließlich Originalersatzteile verwendet werden.
· Bezüglich der Lampe(n) in diesem Gerät und separat verkaufter Ersatzlampen:

Diese Lampen müssen extremen physikalischen Bedingungen in Haushaltsgeräten standhalten, wie z.B. Temperatur, Vibration, Feuchtigkeit, oder sollen Informationen über den Betriebszustand des Gerätes anzeigen. Sie sind nicht für den Einsatz in anderen Geräten vorgesehen und nicht für die Raumbeleuchtung geeignet.
2.6 Entsorgung
WARNUNG! Verletzungs- und Erstickungsgefahr.
· Für Informationen zur ordnungsgemäßen Entsorgung des Geräts wenden Sie sich an die zuständige kommunale Behörde vor Ort.
· Trennen Sie das Gerät von der Stromversorgung.
· Schneiden Sie das Netzkabel in der Nähe des Geräts ab, und entsorgen Sie es.

3. MONTAGE
WARNUNG! Siehe Kapitel Sicherheitshinweise.
3.1 Vor der Montage
Notieren Sie vor der Montage des Kochfelds folgende Daten, die Sie auf dem Typenschild finden. Das Typenschild ist auf dem Boden des Kochfelds angebracht.
Seriennummer …………
3.2 Einbau-Kochfelder
Einbau-Kochfelder dürfen nur nach dem Einbau in normgerechte, passende Einbaumöbel und Arbeitsplatten betrieben werden.
3.3 Anschlusskabel
· Das Kochfeld wird mit einem Anschlusskabel.
· Ersetzen Sie ein defektes Netzkabel durch den Kabeltyp H05V2V2-F, der einer Temperatur von mindestens 90 °C

standhält. Wenden Sie sich bitte an Ihren lokalen Kundendienst. Das Anschlusskabel darf nur von einem qualifizierten Elektriker ersetzt werden.
WARNUNG! Alle elektrischen Anschlüsse müssen von einem qualifizierten Elektriker ausgeführt werden.
VORSICHT! Bohren oder löten Sie die Kabelenden nicht. Das ist verboten.
VORSICHT! Schließen Sie das Kabel nicht ohne Aderendhülse an.
Zweiphasiger Anschluss 1. Entfernen Sie die Aderendhülse von
schwarzen und braunen Adern. 2. Entfernen Sie die Isolierung der braunen
und schwarzen Adern.

DEUTSCH 27

3. Bringen Sie am gemeinsamen Kabelende eine neue Aderendhülse mit 1,5 mm² an (Spezialwerkzeug erforderlich).
230V~
N L

Kabelquerschnitt
400V 2~N N L1 L2

Einphasiger Anschluss 230 V~ Grün gelb

Zweiphasiger Anschluss 400 V 2 ~ N Grün gelb

Blau und blau

Schwarz und braun

Schwarz

Braun

3.4 Anbringen der Dichtung Integrierte Montage
1. Reinigen Sie die Falze in der Arbeitsplatte.
2. Schneiden Sie das 3 x 10 mm Dichtungsband in vier Streifen. Die Streifen müssen dieselbe Länge wie die Falze haben.
3. Schneiden Sie die Enden der Streifen in einem Winkel von 45 Grad. Sie müssen exakt in die Ecken der Falze passen.
4. Bringen Sie die Streifen in den Falzen an. D

Download

AEG IKB84443IB Hob User Manual

Was this manual helpful?