JVC HA-FW1800 Inner Ear Headphones Instructions
Instructions Manual
specifications
System | Dynamic |
Sensitivity | 103 dB/1mW |
Frequency response | 6Hz ~ 52,000Hz |
Nominal impedance | 16Q2 |
Max. Input Capability | 200mW (IEC) |
Cord Length | 1.2m |
Plug | Gold Plated |
Weight (without cord) | 15.0g |
Accessory | S/MS/M/MUL silicone earpieces Carrying case |
Charging earpieces
To ensure proper fit and good sound, select the size of the earpiece.
A good fitting provides good bass
Detach the earpiece
Twist and pull an earpiece.
Attach the earpiece
Slide on an earpiece so that it completely covers the nozzle.
How to use
Install the headphone cable to the headphones by clicking the “L (Left)” and “R(Right)’markings on the cable with those on the headphones.
Detachable Cable
Warranty is not applicable if using a third party’s cable.
Detach the Cable
Pull the plug straight.
- To prevent accidental separation, the connector has a snug fit.
- Do not pull the cable.
Attach the Cable
1 . When attaching the cable, identify the color and the marking on the headphones and the cable. | 2. Insert the plug straight into the headphones. Listen for a click when connecting. |
Caution
The detachable function is provided for maintenance.
Do detach the cable only for replacing.
Do not use any tools.
© 2019 JVCKENWOOD Corporation
JD3835-F00A