Acer 82799 LCD Monitor User Guide

Acer KG241QS LCD Monitor

 

Important safety instructions

Please read the following instructions carefully.

  1.  To clean the LCD monitor screen:
    •  Turn off the LCD monitor and unplug the power cord.
    •  Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
  2.  Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
  3.  Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
  4.  Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
  5.  Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
  6.  Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
    •  Monitor-to-PC signal cable is frayed or damaged.
    •  Liquid spills onto the LCD monitor or the monitor is exposed to rain.
    •  The LCD monitor or case is damaged.
  7.  In order to prevent damage to the LCD panel, do not place the monitor face down on a surface.

Connecting your monitor to a computer

  1.  Turn off your computer and unplug your computer’s power cord.
  2.  Connect the signal cable to the HDMI (optional) and /or DP (optional) input socket of the monitor, and the HDMI (optional) and /or DP (optional) output socket of the graphics card on the computer.
  3.  Connect the USB Cable(Optional) Connect the USB 3.0 cable to port for fast charge. Connect the USB 3.0 cable to port.
  4.  Insert the monitor power cable into the power port at the back of the monitor.
  5.  Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.

FreeSync:
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update.

USER CONTROL

External controls

1 Menu Use the menu button to launch the on-screen display (OSD) and select the OSD menu. See Accessing the OSD menu.
2 Hot key 1 / Modes

 

 Use this button to choose scenario mode

(sRGB, Rec.709, HDR, User, Standard, ECO, Graphics, Movie)

3 Hot key 2 / Brightness

 

 Use this menu to activate brightness adjustment
4 Input Use the input source menu to select between the different video signals
5 Power button Use the power button to turn the monitor on and off.

OSD CONTROL

1 Press like joystick buttons direction of select manual, and press center button to enter manual.
2 Information Show the monitor information, and reset monitor setting.

Input source, resoultion, H/V Frequency, Mode, Series Number)

3 Modes Use this button to choose scenario mode
(sRGB, Rec.709, HDR, User, Standard, ECO, Graphics, Movie)
4 Quit

X

 Use the quit button to exit OSD menu.
5 Power button Use the power button to turn the monitor on and off.


AdaptiveSync (DP/HDMI) : Note: Acer monitor is purposed for video and visual display of information obtained from
electronic devices.

It can allow a AdaptiveSync (DP/HDMI) supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update.

G-Sync Compatible/AdaptiveSync:
DP port could support G-Sync Compatible/AdaptiveSync, HDMI could support HDMI-VRR (for Xbox One VRR).

Regulations and safety notices

FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  •  Increase the separation between the device and receiver.
  •  Connect the device into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.

Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.

Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian users
CAN ICES-3(B)/NMB-3(B) Disposal of waste equipment by user in private household in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

SPECIFICATION

 

 

 

 

 

 

 

LCD Panel

 Driving system TFT Color LCD
Size 27 “W (69cm)
Pixel pitch 0.15525mm(H) x 0.15525mm(V)
Brightness Native 350nits, HDR400 mode: peak 400nits
Contrast 100,000,000:1Max. (ACM)
Viewable angle (Typical) 178° (H) 178° (V) (CR≥10)
Response time 1ms(VRB)
Panel Type In-Plane Switching
H-Frequency HDMI: 30K~160KHz, DP:510K~510KHz, 2DP: 510K~510KHz
V-Frequency HDMI: 30~60Hz(adaptivesync:40~60Hz), DP: 30~120Hz(adaptivesync:48~120Hz), 2DP: 30~144Hz
Display Colors 1.07B Colors
Dot Clock 1100MHz
Max. Resolution 2DP: 3840×2160 @144Hz, 1DP: 3840×2160 @120Hz, HDMI: 3840×2160 @60Hz
Plug & Play VESA DDCCI/DDC2B
Energy Efficiency Class C
*Annual Energy Consumption(Typical) 80 (kWh) (for HDMI-input Model)
 

Power consumption @200cd/m2

 ON Mode 120W(typ.)
Sleep Mode 0.5W(typ.)
Off 0.37W(typ.)
 

Input Connector

 DP (Only DP Model) HDMI (Only HDMI model)

USB Hub / USB3.0 x 4 (Only USB Hub Model)

Input Video Signal DP signal(Only DP-Input Model) HDMI signal(Only HDMI-Input Model)
Speakers(Typical) 4W x 2
Audio Audio-Output (Only Audio-Output Model)
Maximum Screen Size Horizontal:596.16mm Vertical:335.34mm
Power Source 100-240V~, 50/60Hz
Environmental

Considerations

 Operating Temp: 5° to 35°C Storage Temp: -20° to 60°C Operating Humidity: 20% to 80%
Dimensions 629 (W) x 441~541(H) x 307.2(D)mm
Weight (N. W.) 6.63kg Unit (net)
Mechanism spec Tilt: -5° to +25°, Swivel: +/- 20°, Height adjustment: 100mm, Pivot: Yes Detachable foot stand: Yes
 

 

 

 

 

 

External

Controls:

  

 

 

 

 

 

 

Functions

 Brightness                          6-axis Hue                             OSD Lock

Contrast                              6-axis Saturate                      Input

Black Boost                        Volume                                  Auto Source

Blue Light                           Mute                                      DP Format

ACM                                   Over Drive                             Wide Mode

HDR                                    AdaptiveSync                        Ambient Light

Light Sensor                       Refresh Rate Num                 Hot Key Assignment Super Sharpness                VRB                                       DDC/CI

Gamma                               Ultra-low lantecy                    HDMI Black Level

Color Temp.                        Aim Point                              Quick Start Mode

Modes                                Language                              LED Control

Color Space                       OSD Timeout                         4K-144Hz Mode

Grayscale Mode                 Transparency                        Power-off USB Charge

* All specifications are subject to change without notice.

Find manuals and other documents for your Acer product on the official Acer support website.
Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per year.

Note:

  •  HDMI1 (2.0): Support max timing resolution (3840×2160-60Hz), Support (AdaptiveSync & HDR).
  •  HDMI2 (2.0): Support max timing resolution (3840×2160-60Hz), Support (AdaptiveSync & HDR).
  •  DP1: Support max timing resolution (3840×2160-120Hz), Support (AdaptiveSync & HDR).
  •  DP2: Support max timing resolution (3840×2160-120Hz), Support (AdaptiveSync & HDR).
  •  DP1 + DP2: Support max Timing resolution (3840×2160-144Hz), Not Support (AdaptiveSync & HDR).
  •  Need to use VESA certified DP cables