SEALEY APMS70 645MM Modular Shelf Instructions

SEALEY APMS70 645MM Modular Shelf

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this shelf.

  • Keep the work area clean, and uncluttered and ensure there is adequate lighting.
  • DO NOT use the shelf for any purpose other than that for which it is designed.
  • DO NOT use outdoors.
  • DO NOT use in a damp or wet location or an area where there is condensation.
  • DO NOT clean with any solvents which may damage the surfaces or the protective coating.
  • DO NOT overload.

INTRODUCTION

Tough and durable easy-fit shelf with hammered metal finish. Ideal for storing small components and keeping work areas clean and tidy. Suitable to fit on the back panel of the APMS Superline Pro Wall Cabinets and Storage Systems. To be used specifically with APMS50BP or APMS60BP. Some simple assembly is required.

ASSEMBLY

  • Slide end plates over each end of the shelf.
  • Secure with supplied screws.
  • Fit onto peg board.

Note:
It is our policy to continually improve products and as such, we reserve the right to alter data, specifications, and component parts without prior notice.

Important:
No Liability is accepted for incorrect use of this product.

Warranty:
Guarantee is 12 months from purchase date, proof of which is required for any claim.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Contact information