Sharp 42CI2KA 42-Inch Full HD Android TV User Guide

SHARP 42CI2KA 42-Inch Full HD Android TV

Technical Specification

  42CI1KA

42CI2KA

42CI3KA

42CI4KA

42CI5KA

42CI6KA

Energy Eiciency Class (SDR) F
Power consumption (SDR) 48 W
Screen resolution (pixels) 1920 x 1080
Screen Size (diagonal) 106 cm / 42 inches
RF 75 ohm Antenna / Analog / DVB / Satellite
Inputs 3 x HDMI, 2 x USB, 1 x Micro SD card reader, 1 x RJ45 LAN/Ethernet,

1 x Composite/CVBS Video & Component/YPbPr Input, 1 x L/R Audio input for Composite/CVBS & Component YPbPr

Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker*/ Ampliier Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption  

AC 220V ~ 240V; 50Hz

48/70/90W (home mode/standard/max) (<0.5W in Standby)

Dimensions including stand (mm) 952W x 578H x 187D
Net weight (Kgs) 6.7
Wall Mounting VESA 200 x 200

Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).

Quick & easy guide for setting up your TV

  • What is included in the box
  • Using the remote control
  • Setting up the TV for the fi rst time – including attaching the stand
  • Connecting other devices to the Television

Need help setting up or using your TV?
Please contact the UK & ROI Helpline

  • Telephone UK 0330 024 0803 or ROI 01443 3323
  • Online support at: www.umc-uk.co.uk
  • Email support at: [email protected]
  • Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider.
  • Calls to the ROI number are charged at the local call rate.
    The telephone opening hours are:
  • Monday to Friday: 8.30am – 6pm
  • Saturday: 9am – 5pm
  • Bank Holidays: 10am – 4pm

Closed Christmas and New Years day.

Using the remote control

Sky Remote Code

If you wish to use your Sky remote to operate the TV’s basic functions, you will need a Sky remote control (Revision 9 or later) and you will need to program it with the code 2134. If you wish to use your Sky Q remote to operate the TV’s basic functions, you will need to program it with the code 4170.

Online Manual

To launch the online manual, press the HOME button, select Apps from the Home menu, and select “E-instruction Manual” from the apps list.

What is included in the box?

Accessories

Included with this TV are the following accessories

  • 1xQuick Start Guide
  • 1 x Remote Control and 2 x AAA Batteries
  • 1x Safety Leaflet
  • 1x Stand installation pack

Additional Accessories
If you don’t have the RF cable shown below, then you can purchase one from www.umc-uk.co.uk/cables If you are intending to connect your TV to an RF socket in order to receive Freeview you will need this cable.

Microsoft PlayReady”
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. Content owners use Microsoft PlayReadytM content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access Content that requires the upgrade.

FreeviewPlay
Freeview Play brings together live TV viewing with “catch up” TV services such as BBC iPlayer, ITV player, More4 and Demand The Freeview Play Explore app features a carousel of genres to select from when searching for programmes, such as sport, comedy, dramas and soaps, etc. Content is made up from recommendations of the major broadcasters and offers an alternative means of searching.

Note that to use the full functionality of Freeview Play your set must be connected to the internet. Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.

Setting up the TV set for the first time

Fitting the stand

The TV panel must be facing downwards. For the stand installation, there is one type of screw provided as shown below.
Note: To complete the stand installation you will require a cross-head screw driver.

  1. Place the TV set on a fl at and clean surface with the panel facing downwards to avoid damage.
  2. When the stand feet are installed correctly the stand feet will be longest at the front of the TV and shortest at the back with the feet pointing away from each other.
  3. When the stand/feet are in the correct position, secure the feet to the underside of the TV set using 4 screws provided.

Connecting your set

  1. Connect the TV to your power socket.
  2. If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.
  3. Connect to the internet. Ethernet provides the most stable connection.

Powering On the TV

  • Switch on the television by pressing the TV control stick located on the TV set.

Remote Control: Installing Batteries 

  • Insert the batteries supplied into the remote control and press the standby button to power on the TV.

Wall Mounting the TV

Image for illustration only.
For the dimensions of the VESA mounting, please refer to the Technical Specifi cations section of this document.

  1. Remove the four screws that are supplied in the wall mounting holes.
  2. The wall mount can now be easily attached to the mounting holes on the rear of the TV.
  3. Install the wall mounting bracket to the television as advised by the bracket manufacturer.

The picture shows the use of spacers, which are not applicable to all sets/installations.

First-time installation

Basic installation steps are shown below. These may vary slightly depending on your model. Due to Android software updates, the look and feel of the TV start-up procedure and subsequent menus can be subject to chage.

When the set first turns on, it will ask you to select your preferred on-screen display language. This will change the language in which the menus and associated information is displayed in.

Android Phone users
During the set-up process, you will be prompted to sign in to your Google account using your pre-installed “Googleâ  app. This setup process will depend upon which model TV you are setting up. Please ensure you have your account details to hand.

Pairing the remote

If during the fi rst time installation process the remote was not paired or skipped, then follow the process below to pair your remote with the television.

  1. Turn the set on.
  2. Press the button on the remote control.
  3. The LED indicator on the remote will illuminate and the pairing screen will appear on the TV.
  4. Now press and hold the ”Left” and “Home” buttons on the remote simultaneously.
  5. The LED indicator on the remote control will start to flash.
  6. Select the detected remote control shown on the screen and press OK.
  7. Once paired the pairing screen will disappear.

This process will only need to be carried out if the remote is not paired. Once paired, when the button is pressed it will open the Google Assistant screen on the set and activate voice functionality.

The Google Assistant

Remote controls with the Google Assistant have a Google Assistant dedicated button and a built-in microphone. To use this feature with the Google Assistant remote control, follow the instructions as below.

  1. Before using Google Assistant, you will need to pair the remote. Please follow step 5 of this guide to pair your remote to enable the Google Assistant.
  2. Press the button. The LED indicator on the remote control will illuminate.
  3. Wait for the on-screen message from the Google Assistant, then speak into the microphone. A good rule of thumb is to have the microphone positioned about 15-30 centimeters away from your mouth.

By speaking into the microphone, you can search for various content or control your connected smart home devices. Speech examples may be displayed on the television screen depending on your model.

Connectivity

  • The Ethernet/LAN port is used for Digital TV services and smart functions.