VIKING VK300 Akwa LED Ripple FX User Manual

VIKING logoVK300 Akwa LED Ripple FX VIKING VK300 Akwa LED Ripple FX

Akwa LED Ripple FX

Options lock: by default the unit will keep the display locked from unauthorized changes.
To unlock the display:
Press the up and down in succession to input “up, down,up, down” which will show 1234 on the display and the padlock will then change to the open padlock Icon Use up and  down buttons to go through menu options – the currently selected one will highlight in YELLOW and show the value in

LCD Display Menu 1

SET: Select to alter preferences:

  1. DMX Address: Use to set the DMX Address of the fixture from 1 to 512 – don’t forget to press ENTER to confirm the change of address
  2. Run Mode: DMX, AUTO or MANL – Select DMX to control fixture via DMX or MANL to control fixture in stand-alone manual mode or AUTO for built-in programs (using options 3-5 below)
  3. Colour Speed
  4. Water 1 Speed
  5. Water 2 Speed
  6. Channel Mode: Used to select DMX protocol for 5 or 6 channel mode
  7. Temp Set: Set the Maximum temperature of the head. Recommended no higher than 75 degrees
  8. Active Fan: Used to select if the fan is ON or OFF by default
  9. Display set: Auto Display off is either ON or OFF after approx 20 seconds of inactivity
  10. DMX Fail: Set if fixture blacks out on DMX fail (YES) or holds last DMX state (NO)
  11. Line Dimmer: Select Lienaier Dimmer Curve (ON) or Standard (OFF)
  12. Senior Set: Factory Use Only DO NOT ADJUST.
5 Channel 6 Channel Value Function
1 1 000-255 Dimmer from off to 100%
2 2 000-255 Strobe from slow to fast
3 3 Colour
000-009 Open ie; White
010-019 Blue
020-029 Amber i,
030-039 Red
040-049 Green
050-059 Magenta
060-70 Split Colour White to Blue
071-081 Split Colour Blue to Amber
082-093 Split Colour Amber to Red
094-104 Split Colour Red to Green
105-117 Split Colour Green to Magenta
118-127 Split Colour Magenta to White
128-188 Continuous Colour Change clockwise fast to slow
189-255 Cont Colour Change anticlockwise slow to fast
4 4 Ripple A FX Background Ripple
0 Static
001-127 Clockwise ripple slow to fast
128 Static
129-255 Anticlockwise ripple slow to fast
5 5 Ripple B FX Foreground Ripple
0 Static
01/01/0127 Clockwise ripple slow to fast
128 Static
129-255 Anticlockwise ripple slow to fast
6 Reset
0-250 No Effect
251-255 Reset all functions

LCD Display Menu 2

MANL: Stand Alone Control:
Select MANL: To use in stand-alone mode select this option in the centre of the LCD Display This will give a list of all the parameters for the fixture which can be set manually from 000 to 255 Should the power be interrupted the unit will restart with the same paramaters previously set and continue operation accordingly.

INFO: Information of fixture
This information is for Factory use only.

Language: Used to toggle between En (English) and Chinese, just press Enter to reverse if accidentally pressed into Chinese.

Turn Display, used to turn display upside down when hanging fixture in unusual positions to make reading disply easier. Just press Enter and Func to toggle display between the 2 settings