JVC GG-01W Gaming Headphone User Guide

JVC GG-01W Gaming Headphone

CHARGING

  • This unit can be used while charging is in progress.

By pressing the power button () while the power of the headphone is on,  theindicator flashes and a beep sounds to indicate the remaining battery level.

CONNECTING TO PC

HEADPHONE

Adjust the slider position to fit the ear pads to your ears.

Bend the arm of the microphone to adjust the microphone position.

Pressing the mute button () turns on or off the microphone.

  • When the button is pressed down, the microphone is turned on. When the button is not pressed down, the microphone is turned off (muted)

Pressing and holding the power button () for 3 seconds

The serial number can be found by removing the ear pad on the L side.
https://manual3.jvckenwood.com/
For detailed operations, troubleshooting and Information on the European ~ Guarantee, please refer to the user manual.