D-Link DCS-6500LHV2 Compact Full HD Pan & Tilt Wi-Fi Camera Installation Guide

D-Link DCS-6500LHV2 Compact Full HD Pan & Tilt Wi-Fi Camera Installation Guide

Quick Installation Guide

Setup Code

This is a backup of your device’s Setup Code. Please keep it as future reference for your device.

Simple Setup

Note:
Please set up your device before mounting it

  1. Get the mydlink app on the App Store or on Google Play.


  2. Launch the app, then Sign In or Sign Up for a mydlink account. mydlink Lite users may sign in with the same account.
  3. Tapthen tap Add a Device. Follow the app instructions to set up your device.

FAQ

What do I do if my device is not working properly?
Reset and reinstall your device. Press and hold the Reset button until the LED turns solid red. During installation, ensure that:

  • Your router is connected to the Internet and Wi-Fi is enabled
  • Your mobile device is connected to your router’s Wi-Fi
  • Your mydlink device is in range of your Wi-Fi network

How can I use voice commands to control my device?
The device will work with both Amazon Alexa and the Google Assistant. For setup instructions on these services, visit the following websites:

Amazon Alexa:
dlink.com/en/alexa

The Google Assistant:
dlink.com/en/google-assistant

Why is my microSD card not working/not supported?
The microSD card must be formatted into the correct file system (FAT32) before it can be used with this product. This can be done in the mydlink app by selecting the Format function in the storage menu under the device settings.

How do I access the device’s microSD card slot?
Power off the device, then gently roll the black camera ball up until you see the microSD card slot.

LED Behavior

Connected to the network and mydlink
Booting up
Wi-Fi connection lost
Ready for setup
Firmware being updated – do not power of

Need Help?

Having trouble installing your new product?
D-Link’s website contains the latest user documentation and software updates for D-Link products. Customers can contact D-Link Technical Support through our website.