SEALEY APMS64 1360mm 7 Drawer Modular Floor Cabinet Instructions

SEALEY APMS64 1360mm 7 Drawer Modular Floor Cabinet

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

  • WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this storage system.
  • Locate in a suitable work area.
  • Keep the work area clean, and uncluttered and ensure there is adequate lighting.
  • WARNING! Use storage on level and solid ground, preferably concrete.
  • Keep the storage system clean and tidy in accordance with good workshop practice.
  • Keep children and unauthorized persons away from the work area.
  • DO NOT use the storage system for any purpose other than that for which it is designed.
  • DO NOT use the storage system outdoors.
  • DO NOT place the storage system in a damp or wet location or an area where there is condensation.
  • DO NOT clean the storage system with any solvents which may damage the surfaces or the protective coating.
  • DO NOT move the storage system when there are items placed inside.
  • DO NOT step on the shelves.
  • DO NOT overload the storage system.

INTRODUCTION

APMS64/APMS68
Modular storage system ideal for any garage or workshop. Durable construction that will last for years. Easily adjusts to specific needs. Purchase a simple base cabinet or create a full workshop storage system. All pieces are fully welded except Model No’s APMS55 and APMS56 Floor Cabinets which require simple assembly.
APMS65
For use with Model No’s APMS51, APMS52, APMS57, APMS59, and APMS64 Floor Cabinets. Supplied with appropriate fixings to make an integral self-supporting unit, or use in conjunction with Model No. APMS50BP Back Panel and upright support if part of a larger modular system. Two-door cabinet with a high-quality lock supplied with two keys. Aluminum handles.

SPECIFICATION

  • Model No:……………………………………………………….APMS64
  • Overall Size:……………………………………1360 x 460 x 910mm
  • Small Draw (x5):………………………………….800 x 400 x 55mm
  • Medium Draw (x1):……………………………..800 x 400 x 135mm
  • Large Draw (x1):………………………………..1250 x 400 x 85mm
  • Cupboard:…………………………………………510 x 620 x 420mm
  • Model No:……………………………………………………… APMS65
  • Overall Size (W x D x H):…………………….680 x 280 x 350mm
  • Model No:……………………………………………………….APMS68
  • Overall Size:……………………………………1360 x 280 x 350mm

ASSEMBLY

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling center and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 [email protected] www.sealey.co.uk